SDI100N12 NPT IGBT Modules Dimensions in mm (1mm = 0.0394") TC = 25oC, unless otherwise specified Absolute Maximum Ratings Symbol IGBT VCES IC ICRM VGES TVj,(Tstg) Conditions o TC= 25(80) C TC= 25(80)oC, tP =1ms _ Tstg TOPERATION < AC, 1min Visol Inverse Diode IF = -IC IFRM TC= 25(80)oC TC= 25(80)oC, tP =1ms IFSM tP =10ms; sin.;Tj=150oC Freewheeling diode TC= 25(80)oC IF = -IC IFRM TC= 25(80)oC, tP =1ms IFSM tP =10ms; sin.;Tj=150oC Values Units 1200 V 100(90) 200(180) _ +20 A A _ 40...+150(125) V o C 2500 V 95(65) 200(180) A A 720 A 130(90) 200(180) A A 1100 A SDI100N12 NPT IGBT Modules TC = 25oC, unless otherwise specified Characteristics Symbol IGBT VGE(th) ICES VCE(TO) rCE VCE(sat) Cies Coes Cres LCE RCC'+EE' Conditions VGE = VCE, IC =2mA VGE = 0; VCE = VCES; Tj = 25(125)oC Tj = 25(125)oC VGE = 15V, Tj = 25(125)oC IC =75A; VGE = 15V; chip level under following conditions VGE = 0, VCE = 25V, f = 1MHz min. 4.5 res., terminal-chip TC = 25(125)oC under following conditions: VCC = 600V, IC = 75A RGon = RGoff =15 , Tj = 125oC VGE = 15V td(on) tr td(off) tf Eon(Eoff) Inverse Diode under following conditions: VF = VEC IF = 75A; VGE = 0V; Tj = 25(125)oC V(TO) Tj = 125oC rT Tj = 125oC IRRM IF = 75A; Tj = 25(125)oC Qrr di/dt = 800A/us Err VGE = V FWD under following conditions: VF = VEC IF = 75A; VGE = 0V; Tj = 25(125)oC V(TO) Tj = 125oC rT Tj = 125oC IRRM IF =75A; Tj = 25oC Qrr di/dt = A/us Err VGE = V Thermal Characteristics Rth(j-c) per IGBT Rth(j-c)D per Inverse Diode Rth(j-c)FD per FWD Rth(c-s) per module Mechanical Data Ms to heatsink M6 Mt to terminals M5 w typ. 5.5 6.5 0.1 0.3 1.4(1.6) 1.6(1.8) 14.6(20) 18.6(25.3) 2.5(3.1) 3(3.7) 5 6.6 0.72 0.9 0.38 0.5 30 0.75(1) Units V mA V m V nF nH m 30 70 450 70 10(8) 60 140 600 90 ns ns ns ns mJ 2(1.8) 2.5 1.2 15 V V m A uC mJ 2.2 1.2 11 V V m A uC mJ 0.18 0.5 0.36 0.05 K/W K/W K/W K/W 5 5 160 Nm Nm g 12 27(40) 3(10) 1.85(1.6) 9 30(45) 3.5(11) 3 2.5 max.