22 COREY STREET, MELROSE, MASSACHUSETTS 02176
PHONE (781) 665-1071 FAX (781) 665-7379
WEBSITE: http://www.cdi-diodes.com E-mail: mail@cdi-diodes.com
• 1N4099-1 THRU 1N4135-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS
PER MIL-PRF-19500/435
• LOW CURRENT OPERATION AT 250
µ
A
• LOW REVERSE LEAKAGE AND LOW NOISE CHARACTERISTICS
• METALLURGICALLY BONDED
1N4099 thru 1N4135
and
1N4099-1 thru 1N4135-1
JEDEC NOMINAL ZENER MAXIMUM MAXIMUM REVERSE MAXIMUM MAXIMUM
TYPE ZENER TEST ZENER LEAKAGE NOISE ZENER
NUMBER VOLTAGE CURRENT IMPEDANCE CURRENT DENSITY CURRENT
VZ@ lZT IZT ZZT lR@ VRND@ lZT lZM
(Note 1) (Note 2)
VOLTS
µ
A OHMS
µ
A VOLTS
µ
V/ Hz mA
1N4099 6.8 250 200 10 5.17 40 56
1N4100 7.5 250 200 10 5.70 40 51
1N4101 8.2 250 200 1.0 6.24 40 46
1N4102 8.7 250 200 1.0 6.61 40 44
1N4103 9.1 250 200 1.0 6.92 40 42
1N4104 10 250 200 1.0 7.60 40 38
1N4105 11 250 200 .05 8.44 40 35
1N4106 12 250 200 .05 9.12 40 32
1N4107 13 250 200 .05 9.87 40 29
1N4108 14 250 200 .05 10.65 40 27
1N4109 15 250 100 .05 11.40 40 25
1N4110 16 250 100 .05 12.15 40 24
1N4111 17 250 100 .05 12.92 40 22
1N4112 18 250 100 .05 13.67 40 21
1N4113 19 250 150 .05 14.44 40 20
1N4114 20 250 150 .01 15.20 40 19
1N4115 22 250 150 .01 16.72 40 17
1N4116 24 250 150 .01 18.25 40 16
1N4117 25 250 150 .01 19.00 40 15
1N4118 27 250 150 .01 20.46 40 14
1N4119 28 250 200 .01 21.28 40 14
1N4120 30 250 200 .01 22.80 40 13
1N4121 33 250 200 .01 25.08 40 12
1N4122 36 250 200 .01 27.38 40 11
1N4123 39 250 200 .01 29.65 40 9.8
1N4124 43 250 250 .01 32.65 40 8.9
1N4125 47 250 250 .01 35.75 40 8.1
1N4126 51 250 300 .01 38.76 40 7.5
1N4127 56 250 300 .01 42.60 40 6.7
1N4128 60 250 400 .01 45.60 40 6.4
1N4129 62 250 500 .01 47.10 40 6.1
1N4130 68 250 700 .01 51.68 40 5.6
1N4131 75 250 700 .01 57.00 40 5.1
1N4132 82 250 800 .01 62.32 40 4.6
1N4133 87 250 1000 .01 66.12 40 4.4
1N4134 91 250 1200 .01 69.16 40 4.2
1N4135 100 250 1500 .01 76.00 40 3.8
NOTE 1 The JEDEC type numbers shown above have a Zener voltage tolerance of + 5% of
the nominal Zener voltage. Vz is measured with the device junction in thermal
equilibrium at an ambient temperature of 25°C + 3°C. A “C” suffix denotes a + 2%
tolerance and a “D” suffix denotes a + 1% tolerance.
NOTE 2 Zener impedance is derived by superimposing on lZT, A 60 Hz rms a.c. current
equal to 10% of lZT (25
µ
A a.c.).
MAXIMUM RATINGS
Junction and Storage Temperature: -65°C to +175°C
DC Power Dissipation: 500mW @ +50°C
Power Derating: 4 mW / °C above +50°C
Forward Voltage at 200 mA: 1.1 Volts maximum
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
FIGURE 1
DESIGN DATA
CASE: Hermetically sealed glass
case. DO – 35 outline.
LEAD MATERIAL: Copper clad steel.
LEAD FINISH: Tin / Lead
THERMAL RESISTANCE: (ROJEC):
250 ˚C/W maximum at L = .375 inch
THERMAL IMPEDANCE: (ZOJX): 35
˚C/W maximum
POLARITY: Diode to be operated with
the banded (cathode) end positive.
MOUNTING POSITION: ANY.
√
1N4099 thru 1N4135
INCLUDING -1 VERSIONS 400
300
200
100
0JL, Junction to Lead
Thermal Resistance (°C/W)
0 0.2 0.4 0.6 0.8 1.0
L, lead Length to Heat Sink (INCHES)
FIGURE 2
TYPICAL THERMAL RESISTANCE
.1 .2 .5 1 2 5 10 20 50 100
OPERATING CURRENT IZT (mA)
FIGURE 3
ZENER IMPEDANCE VS. OPERATING CURRENT
ZENER IMPEDANCE ZZT (OHMS)
1000
500
400
300
200
100
50
40
30
20
10
5
4
3
2
1
