CT3377 Datasheet Digital Multimeter Accessory Kit Deluxe accessory kit for high-performance bench digital multimeters (DMM's) Description This kit of accessories was assembled to facilitate requirements by high-performance bench digital multimeters (DMM's) users. All the most popular accessories in one kit. Excellent for a new testing bench or replacement for worn out equipment. - Silicone jacketed test lead wire - MiniProbes w/Spring loaded Stainless Steel Tips - Packaged in Plastic Case Kit Contains: -(4) Test Lead 4mm Shth P-RaP Silic 0.75, 100 cm (40"): (2) Black, (2) Red -(2) Spg Tip Mini-Probe-4mm Jack: (1) Black, (1) Red -(1) Insulated BNC male Adapt-4mm Safety Jacks -(2) Adapter 4mm Banana Plug to Jack: (1) Black, (1) Red -(2) Mini Flex Clip-4mm Jack-Silic 0.40, 10 cm: (1) Black, (1) Red -(2) Adapter 6mm Spade 4mm-Jack: (1) Black, (1) Red -(2) Lead minipro-J-PVC 0.40, 10 cm: (1) Black, (1) Red -(1) Tweezer Test Lead Set- 4mm P, w/PVC pouch Technical data subject to change. (c) Cal Test Electronics 2018. caltestelectronics.com All specifications apply to the unit after a temperature stabilization time of 20 minutes over an ambient temperature range of 25C 5C. Specifications Temperature (degrees) -20 to +80 C RoHS (2011/65/EU) Compliant Specifications are subject to change without notice. To ensure the most current version of this manual, please download the current version from our website: caltestelectronics.com Technical data subject to change. (c) Cal Test Electronics 2018. caltestelectronics.com