MBR350, MBR360 MBR360 is a Preferred Device Axial Lead Rectifiers . . . employing the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlap contact. Ideally suited for use as rectifiers in low-voltage, high-frequency inverters, free wheeling diodes, and polarity protection diodes. * Extremely Low vF * Low Power Loss/High Efficiency * Highly Stable Oxide Passivated Junction * Low Stored Charge, Majority Carrier Conduction http://onsemi.com SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 50, 60 VOLTS Mechanical Characteristics: * Case: Epoxy, Molded * Weight: 1.1 gram (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: 220C Max. for 10 Seconds, 1/16 from case * Shipped in plastic bags, 500 per bag * Available Tape and Reeled, 1500 per reel, by adding a "RL'' suffix to the part number * Polarity: Cathode indicated by Polarity Band * Marking: B350, B360 AXIAL LEAD CASE 267-03 STYLE 1 MAXIMUM RATINGS Rating Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage MBR350 MBR360 VRRM VRWM VR Average Rectified Forward Current TA = 65C (RJA = 28C/W, P.C. Board Mounting) Max Unit 50 60 B3x0 IO 3.0 A Non-Repetitive Peak Surge Current (Note 1.) (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz, TL = 75C) IFSM 80 A Operating and Storage Junction Temperature Range (Reverse Voltage Applied) TJ, Tstg Peak Operating Junction Temperature (Forward Current Applied) MARKING DIAGRAM V B3x0 x = Device Code = 5 or 6 ORDERING INFORMATION Device TJ(pk) C -65 to +150 C 150 Package Shipping MBR350 Axial Lead 500 Units/Bag MBR350RL Axial Lead 1500/Tape & Reel MBR360 Axial Lead 500 Units/Bag MBR360RL Axial Lead 1500/Tape & Reel 1. Lead Temperature reference is cathode lead 1/32 from case. Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2000 October, 2000 - Rev. 1 1 Publication Order Number: MBR350/D MBR350, MBR360 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Ambient (see Note 3., Mounting Method 3) Symbol Max Unit RJA 28 C/W Symbol Max Unit ELECTRICAL CHARACTERISTICS (TL = 25C unless otherwise noted) (Note 1.) Characteristic Maximum Instantaneous Forward Voltage (Note 2.) (iF = 1.0 Amp) (iF = 3.0 Amp) (iF = 9.4 Amp) vF Maximum Instantaneous Reverse Current @ Rated dc Voltage (Note 2.) TL = 25C TL = 100C iR V 0.600 0.740 1.080 mA 0.60 20 1. Lead Temperature reference is cathode lead 1/32 from case. 2. Pulse Test: Pulse Width = 300 s, Duty Cycle = 2.0%. 20 75C 25C I , REVERSE CURRENT (mA) R TJ = 100C 20 10 10 7.0 3.0 5.0 2.0 1.0 0.50 100C 75C 0.20 0.10 0.05 *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 0.02 0.01 2.0 25C 0.005 0.002 1.0 0 10 20 30 40 50 60 80 VR REVERSE VOLTAGE (VOLTS) 0.7 Figure 2. Typical Reverse Current* 0.5 , AVERAGE FORWARD CURRENT (AMPS) i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 5.0 TJ = 150C 0.3 0.2 0.1 0.07 0.05 I 0.02 F (AV) 0.03 0 0.2 0.6 0.8 0.4 1.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.2 1.4 5.0 RATED VR RJA = 28C/W 4.0 dc 3.0 SQUARE WAVE 2.0 1.0 0 TJ = 150C 0 20 40 60 80 100 120 TA, AMBIENT TEMPERATURE (C) 140 Figure 3. Current Derating Ambient (Mounting Method #3 per Note 3.) Figure 1. Typical Forward Voltage http://onsemi.com 2 160 5.0 300 4.0 200 TJ = 150C 3.0 C, CAPACITANCE (pF) P , AVERAGE POWER DISSIPATION (WATTS) F (AV) MBR350, MBR360 SQUARE WAVE 2.0 dc 1.0 0 TJ = 25C 100 70 50 40 0 1.0 2.0 3.0 4.0 IF (AV), AVERAGE FORWARD CURRENT (AMPS) 30 5.0 0 10 Figure 4. Power Dissipation 20 30 40 VR, REVERSE VOLTAGE (VOLTS) Figure 5. Typical Capacitance NOTE 3. -- MOUNTING DATA Data shown for thermal resistance junction-to-ambient (RJA) for the mountings shown is to be used as typical guideline values for preliminary engineering, or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RJA IN STILL AIR Mounting Method Lead Length, L (in) 1/8 1/4 1/2 3/4 RJA 1 50 51 53 55 C/W 2 58 59 61 63 C/W 3 C/W 28 Mounting Method 1 Mounting Method 2 P.C. Board where available copper surface is small. Vector Push-In Terminals T-28 L EEEEEEEEEEEEE EEEEEEEEEEEEE L EEEEEEEEEEE EEEEEEEEEEE L Mounting Method 3 EE EE EE EE EE EE EE P.C. Board with 2-1/2 X 2-1/2 copper surface. L = 1/2'' Board Ground Plane http://onsemi.com 3 L 50 MBR350, MBR360 PACKAGE DIMENSIONS AXIAL LEAD CASE 267-03 ISSUE G K D A 1 2 B K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.370 0.380 0.190 0.210 0.048 0.052 1.000 --- MILLIMETERS MIN MAX 9.40 9.65 4.83 5.33 1.22 1.32 25.40 --- STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 4 MBR350/D