VJ X7R High Voltage Vishay Vitramon Multilayer Ceramic Chip Capacitors FEATURES * High voltage ratings * Low ESR designs RoHS * Ideal for surge suppression and high voltage applications COMPLIANT Insulation Resistance (IR): At + 25 C and rated voltage 100 000 M minimum or 1000 F, whichever is less At + 125 C and rated voltage 10 000 M minimum or 100 F, whichever is less GENERAL SPECIFICATIONS NOTE: Electrical characteristics at + 25 C unless otherwise specified Capacitance Range: 330 pF to 1.8 F Dielectric Withstanding Voltage (DWV): This is the maximum voltage the capacitors are tested for a 1 to 5 second period and the charge/discharge current does not exceed 50 mA 200 V DC: DWV at 250 % rated voltage 500 V DC: DWV at 200 % rated voltage 630 V DC: DWV at 150 % rated voltage 1000 V DC: DWV at 150 % rated voltage Temperature Coefficient of Capacitance (TCC): 15 % from - 55 C to + 125 C Dissipation Factor (DF): 2.5 % maximum at 1.0 Vrms and 1 kHz Aging Rate: 1 % maximum per decade ORDERING INFORMATION VJ1812 CASE CODE 0603 Y 472 K DIELECTRIC CAPACITANCE CAPACITANCE TOLERANCE NOMINAL CODE Y = X7R 0805 1206 1210 1808 1812 1825 Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 472 = 4700 pF J=5% K = 10 % M = 20 % X E A T ### 3) TERMINATION DC VOLTAGE RATING 1) MARKING PACKAGING PROCESS CODE X = Ni barrier 100 % tinplated F = AgPd C = 200 V A = Unmarked E = 500 V M = Marked L = 630 V G = 1000 V 2220 T = 7" reel/plastic tape 2225 C = 7" reel/paper tape 3640 R = 11 1/4" reel/plastic tape P = 11 1/4" reel/paper tape O = 7" reel/flamed paper tape I = 11 1/4"/13" reel/flamed paper tape NOTE: "I" and "O" is used for "F" termination Note 1. DC voltage rating should not be exceeded in application 3. Process Code may be added with up to three digits, used to control non-standard products and/or special requirements Document Number 45074 Revision 27-Apr-06 For technical questions contact MLCC@vishay.com www.vishay.com 15 VJ X7R High Voltage Vishay Vitramon Multilayer Ceramic Chip Capacitors X7R DIELECTRIC - HIGH VOLTAGE STYLE EIA TYPE VJ0603 VJ0805 0603 VOLTAGE (Vdc) 200 CAP. CAP. CODE 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 222 2200 pF 272 2700 pF 332 3300 pF 392 3900 pF 472 4700 pF 562 5600 pF 682 6800 pF 822 8200 pF 103 0.010 F 123 0.012 F 153 0.015 F 183 0.018 F 223 0.022 F 273 0.027 F 333 0.033 F 393 0.039 F 473 0.047 F 563 0.056 F 683 0.068 F 823 0.082 F 104 0.10 F 124 0.12 F 154 0.15 F 184 0.18 F 224 0.22 F 274 0.27 F 334 0.33 F 394 0.39 F 474 0.47 F 564 0.56 F 684 0.68 F 824 0.82 F 105 1.0 F 125 1.2 F 155 1.5 F 185 1.8 F - 0805 200 - VJ1206 VJ1210 1) VJ1808 1) VJ1812 1) VJ1825 1) VJ2220 1) VJ2225 1) VJ3640 1) 1206 1210 _ 1812 1825 - - - 200 500 630 200 500 200 500 1000 200 500 1000 200 500 1000 200 500 200 500 1000 200 500 Note 1 See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 www.vishay.com 16 For technical questions contact MLCC@vishay.com Document Number 45074 Revision 27-Apr-06 VJ X7R High Voltage Vishay Vitramon Multilayer Ceramic Chip Capacitors X7R DIELECTRIC - HIGH VOLTAGE - TYPICAL PARAMETERS MINIMUM INSULATION RESISTANCE VS TEMPERATURE TEMPERATURE COEFFICIENT OF CAPACITANCE 10000 INSULATION RESISTANCE ( FARADS) % CAPACITANCE CHANGE 20 15 10 5 0 -5 - 10 - 15 1000 100 10 - 20 - 75 - 50 - 25 0 25 50 75 10 100 125 100 125 TEMPERATURE C TEMPERATURE C AGING RATE - X7R VOLTAGE COEFFICIENT OF CAPACITANCE - 1000V RATED 10 % CAPACITANCE CHANGE 1.0 % CAPACITANCE CHANGE 25 0.0 - 1.0 - 2.0 - 3.0 - 4.0 0 - 10 - 20 - 30 - 40 - 50 1 10 100 1000 10000 0 100 200 300 HOURS Document Number 45074 Revision 27-Apr-06 400 500 600 700 800 900 1000 DC VOLTS APPLIED For technical questions contact MLCC@vishay.com www.vishay.com 17 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1