Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Tantalum Solid Capacitors
SW1
H
L
W
S
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
R. Voltage code Lot. No.
R.Cap. code
Polarity marking(+)
Surface Mount Type
Series : TH
● Guaranteed at 125 °C, 1000h
● RoHS compliance, Halogen free
Size code D2E D2 D3L D4
Category temperature range
–55 °C to +125 °C
Rated voltage range 2.5 V.DC to 6.3 V.DC 2.5 V.DC to 10 V.DC 4 V.DC to 6.3 V.DC 6.3 V.DC to 10 V.DC
Category voltage range 1.6 V.DC to 4.0 V.DC 1.6 V.DC to 6.3 V.DC 2.5 V.DC to 4.0 V.DC 4.0 V.DC to 6.3 V.DC
Rated capacitance range 150 µF to 330 µF 68 µF to 220 µF 220 µF to 330 µF 220 µF to 470 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Surge voltage (V.DC) Rated voltage × 1.15
Endurance
+125 °C 1000h, category voltage appled
Capacitance change
Within ±20 % of the initial value
tan d< 2 times of the initial limit
DC leakage current < 2 times of the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 500 h, No-applied voltage
Capacitance change
Within +40 %, −20 % of the initial value
tan d< 1.5 times of the initial limit
DC leakage current < 3 times of the initial limit
Size code L±0.3✽1W±0.2 H±0.1✽2S±0.2 W1±0.1
D2E 7.3 4.3 1.8 1.3 2.4
D2 7.3 4.3 1.9 1.3 2.4
D3L 7.3 4.3 2.8 1.3 2.4
D4 7.3 4.3 3.8 1.3 2.4
R. Voltage (V.DC)
2.5 4.0 6.3 10
Code eg j A
Series
Rated
voltage
(V.DC)
Rated
temp.
(°C)
Category
voltage
(V.DC)
Category
temp.
(°C)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications Standard Floor life
LWH
Ripple
✽1
current
(mAr.m.s.)
ESR ✽2
(mΩ max.)
tan d
✽3LC ✽4
(µA) Part number
Min.
Packaging Q'ty
(pcs)
Refl ow
Temp
< 260°C
Refl ow
Temp
< 250°C
THB
4.0 105 2.5 125 330 7.3 4.3 2.8 D3L 2000 40 0.10 132.0 4THB330ML 2500
–5
6.3
105 4.0 125 220 7.3 4.3 2.8 2000 40 0.10 138.6 6THB220ML 2500
105 4.0 125 330 7.3 4.3 3.8
D4
3000 40 0.10 207.9 6THB330M 2000
105 4.0 125 470 7.3 4.3 3.8 3000 35 0.10 296.1 6THB470M 2000
10 105 6.3 125 220 7.3 4.3 3.8 3000 40 0.10 220.0 10THB220M 2000
105 6.3 125 330 7.3 4.3 3.8 3000 35 0.10 330.0 10THB330M 2000
THC
2.5 105 1.6 125 220 7.3 4.3 1.9
D2
1700 45 0.10 55.0 2R5THC220M 3000
6.3 105 4.0 125 150 7.3 4.3 1.9 1900 40 0.10 94.5 6THC150M 3000
10 105 6.3 125 68 7.3 4.3 1.9 1700 45 0.10 68.0 10THC68M 3000
THE
2.5
105 1.6 125
330
7.3 4.3 1.8
D2E
3100 15 0.10 82.5 2R5THE330MF 3000
105 1.6 125 7.3 4.3 1.8 2800 18 0.10 82.5 2R5THE330MI 3000
105 1.6 125 7.3 4.3 1.8 2400 25 0.10 82.5 2R5THE330M 3000
4.0
105 2.5 125
220
7.3 4.3 1.8 3100 15 0.10 88.0 4THE220MF 3000
105 2.5 125 7.3 4.3 1.8 2800 18 0.10 88.0 4THE220MI 3000
105 2.5 125 7.3 4.3 1.8 2400 25 0.10 88.0 4THE220M 3000
6.3 105 4.0 125 150 7.3 4.3 1.8 2800 18 0.10 94.5 6THE150MI 3000
105 4.0 125 7.3 4.3 1.8 2400 25 0.10 94.5 6THE150M 3000
✽1 Ripple current (100 kHz/ +45 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Unit : mm
Marking
✽ Externals of fi gure are the reference. ✽ 1 ±0.2 : D2 ✽ 2 ±0.2 :D3L, D4
D2E, D3L Size D2, D4 Size
Features
Speci cations
Dimensions (not to scale)
Characteristics list
Jun. 201802
■ If you want to use our products described in this online catalog for applications requiring
special qualities or reliability, or for applications where the failure or malfunction of the
products may directly jeopardize human life or potentially cause personal injury
(e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion
equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety
equipment), it is necessary to verify whether the specifications of our products fit to such
applications. Please ensure that you will ask and check with our inquiry desk as to whether
the specifications of our products fit to such applications use before you use our products.
■ The quality and performance of our products as described in this online catalog only apply
to our products when used in isolation. Therefore, please ensure you evaluate and verify
our products under the specific circumstances in which our products are assembled in your
own products and in which our products will actually be used.
■ If you use our products in equipment that requires a high degree of reliability, regardless
of the application, it is recommended that you set up protection circuits and redundancy
circuits in order to ensure safety of your equipment.
■ The products and product specifications described in this online catalog are subject to
change for improvement without prior notice. Therefore, please be sure to request and
confirm the latest product specifications which explain the specifications of our products in
detail, before you finalize the design of your applications, purchase, or use our products.
■ The technical information in this online catalog provides examples of our products'
typical operations and application circuits. We do not guarantee the non-infringement of
third party's intellectual property rights and we do not grant any license, right, or interest
in our intellectual property.
■ If any of our products, product specifications and/or technical information in this online
catalog is to be exported or provided to non-residents, the laws and regulations of the
exporting country, especially with regard to security and export control, shall be observed.
■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies
depending on the part number or series of our products.
■ When you use the inventory of our products for which it is unclear whether those products
are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the
website inquiry form and contact us.
We do not take any responsibility for the use of our products outside the scope of the
Guidelines and precautions regarding the
described in this online catalog.
<Regarding the Certificate of Compliance with
01-Apr-19
technical information and use of our products
the EU RoHS Directive/REACH Regulations>