PME285 * EMI suppressor, class X2, metallized paper * 0.001 - 0.1 F, 275 VAC, +110 C * The highest possible safety regarding active and passive flammability. * Self-extinguishing encapsulation. The material is recognized according to UL 94 V-0. * Very precise positioning of leads in relation to the case giving efficient utilisation of PC board space. * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. * High dU/dt capability. * Good resistance to ionisation due to impregnated dielectric. * The capacitors meet the most stringent IEC humidity class, 56 days. * The impregnated paper ensures excellent stability giving outstanding reliability properties, especially in applications having continuous operation. L B CONSTRUCTION Multi-layer metallized paper. Encapsulated The capacitors are intended for use as interference suppressors in X2, across-the- and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. line, antenna-coupling and line-by-pass. H TYPICAL APPLICATIONS TECHNICAL DATA Rated voltage 275 VAC 50/60 Hz Capacitance range 0.001 - 0.1 F Capacitance tolerance 20% Temperature range -40 to +110C Climatic category IEC 40/110/56/B Approvals S, N, D, FI, VDE, SEV, IMQ, UL, CSA Dissipation factor tan 1.3 % at 1 kHz Insulation resistance 12000 M Measured at 500 VDC after 60 s, +23C Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead lengths. In DC applications Recommended voltage: 630 VDC Test voltage between terminals The 100% screening factory test is carried out at 2150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. l p 0.3 d = 0.6 for p = 10.2 0.8 for p = 15.2 and 20.3 1.0 for p = 25.4 l = standard : 30 +5/-0 mm option : short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each 10 - 500 Hz at 0.75 mm or 98 m/s2 No visible damage No open or short circuit Bump IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2 No visible damage No open or short circuit Solderability IEC 60068-2-20, Test Ta Solder globule method Wetting time < 1 s Active flammability EN 132400 Passive flammability IEC 60384-14(1993) EN 132400 Humidity IEC 60068-2-3, Test Ca +40C and 90 - 95% R.H. 56 days 170 d PME285 ARTICLE TABLE p Quantity per package reel R30 R06 taped pcs pcs pcs Approvals Weight f O g MHz Max dU/dt V/s S N D FI VDE SEV IMQ UL CSA Capaci- Max dimensions tance in mm F B H L Article code 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 4.5 9.5 4.5 9.5 4.5 9.5 4.5 9.5 4.5 9.5 4.5 10.5 13.0 13.0 13.0 13.0 13.0 13.0 10.0 10.0 10.0 10.0 10.0 10.0 800 800 800 800 800 800 1600 1600 1600 1600 1600 1600 700 700 700 700 700 700 0.9 0.9 0.9 0.9 0.9 1.1 55 45 38 32 27 22 1200 1200 1200 1200 1200 1200 PME285MA4100MR30 PME285MA4150MR30 PME285MA4220MR30 PME285MA4330MR30 PME285MA4470MR30 PME285MA4680MR30 0.010 0.015 0.022 0.033 0.047 0.068 0.10 5.5 5.5 5.5 5.5 7.5 7.5 8.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 500 500 500 500 400 400 250 1000 1000 1000 1000 800 600 400 600 600 600 600 400 400 400 1.5 1.6 1.6 1.9 2.3 2.9 3.6 15 12 10 8.4 6.5 4.7 4.5 1200 1200 1200 1200 1200 1200 600 PME285MB5100MR30 PME285MB5150MR30 PME285MB5220MR30 PME285MB5330MR30 PME285MB5470MR30 PME285MB5680MR30 PME285MB6100MR30 10.5 11.5 11.5 13.0 12.5 15.0 17.0 MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference S N D Fl VDE SEV IMQ UL EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 EN 132400 UL 1283 (UR=250 VAC) UL 1414 (UR=250 VAC) C 22.2 No. 1 9913230/01 P99100775 DK99-01442 207513 121167 99.7 70302.01 V 4756 E 100117 E 73869 53108 CSA ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. * * * * * * * RIFA RIFA article code Rated capacitance Rated voltage X2 SH, for self healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Approval marks * Manufacturing code (year, month) PACKING Capacitors in standard design (lead length 30 mm) and with lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 171