PACKING
Tape and Reel Orientation
NOTE : Top view shown with cover tape removed.
MODEL TAPE WIDTH REEL WIDTH COMPONENT PITCH UNITS PER REEL
SMI-40 SERIES 12mm 18.4mm 8mm 2500
SMI-50 SERIES 16mm 22.4mm 8mm 1000
TAPE SPECIFICATIONS:
SMI-40 SERIES SMI-50 SERIES
Carrier Tape Type : Conductive. Carrier Tape Type : Conductive.
Cover Tape Type : Non-antistatic. Cover Tape Type : Antistatic.
Cover Tape Adhesion to Carrier : 60 – 175 grams. Cover Tape Adhesion to Carri er :10 – 70 grams.
REEL SPECIFICATIONS:
Non-antistatic.
Diameter (flange) : 13” (330.2mm)
STANDARDS : All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481
“Taping of surface Mount Components for Automatic Placement”.
ENVIRONMENTAL PERFORMANCE
ITEM TEST CONDITION
1
Thermal Shock Ten cycles of 30 minutes @ -55℃, 15 seconds maximum @ room ambient,
30 minutes @ +125℃, 15 seconds maximum @ room ambient.
2 Vibration 1 cycle of 30 minutes duration per the following.
5-7 Hz constant displacement of .75 inch, 5 minutes,
7-30 Hz constant acceleration of 1.5 g’s. 10 minutes,
30-50 Hz constant displacement of 0.033 inch, 5 minutes,
50-500 Hz constant acceleration of 4.2 g’s. 10 minutes.
3 Solderability Per MIL –STD-202, Method 208, except steam aging is omitted
And pads are dipped 30 from vertical. Solder tem peratur e:
+ 245℃ ±5℃.Immersion dwell time: 5 ±1/2 seconds.
4 Storage Life Subject the component to 168 hours at + 85℃and 85% relative
humidity.
5 Moisture Resistance Precondition at + 40℃ for 60 minutes. Subject the component
to 240 hours at + 40℃ and 90 to 95% relative humidity.
6 Mechanical Shock One-half sine pulse (8700 g’s for 0.3 m illiseconds)in each.
direction along 3 mutually perpendicular axes in each direction
(total of 6 shocks).
USER DIRECTION OF FEED
