TFPTL15L3901JH5B - Vishay / Dale - Datasheet.Directory

TFPTL

www.vishay.com Vishay

Revision: 25-Oct-11 1Document Number: 33027

For technical questions, contact: nlr@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Radial Leaded PTC - Nickel Thin Film Linear Thermistors

DESCRIPTION

These thermistors are based on a Nickel thin film resistor

technology as thermal sensitive material. The device

consists of a thin film ceramic chip with two tinned copper

clad steel wire leads.

FEATURES

• Nickel thin film PTC element

• High stability over the entire temperature range

• cUL recognized component: File E148885

• Epoxy coated UL 94 V-0 approved

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

Temperature measurement, sensing, compensation, and

control in industrial and consumer applications. For

on-board or remote sensing.

MARKING

The thermistors are laser marked with value and tolerance

reference on an epoxy based coating.

(Example: 102F = 10 x 102 = 1000 Ω 1 %)

MOUNTING

By soldering or welding in any position.

Notes

(1) Contact Vishay if closer TCR lot tolerance is desired

(2) Other R25-values and tolerances are available upon request

(3) Rated continuous working voltage is maximum working voltage or , whichever is less

Note

•Other R25-values and tolerances are available upon request

QUICK REFERENCE DATA

PARAMETER VALUE UNIT

DESCRIPTION TFPTL10 TFPTL15

Resistance value at 25°C (2) 100 to 1K 100 to 5K Ω

Tolerance on R25-value (2) ± 1; ± 5 %

TCR at 25 °C 4110 ppm/K

Tolerance on TCR at 25 °C (1) ± 400 ppm/K

Operating temperature range:

at rated power

at zero dissipation

-55 to+70

-55 to+150

°C

Response time (in oil) ≈ 1.1 ≈ 1.6 s

Dissipation factor δ (for information only) 2.9 3.4 mW/K

Maximum rated power at 70 °C (P70) 75 100 mW

Maximum working voltage RCWV (3) 30 40 V

Climatic category (LCT/UCT/days) 55/150/56 -

Weight 0.12 0.14 g

STANDARD RESISTANCE VALUES at 25 °C in Ω

100 150 220 330 470 680 1K 1.5K 2.2K 3.3K 4.7K

120 180 270 390 560 820 1.2K 1.8K 2.7K 3.9K 5.0K

GLOBAL PART NUMBER INFORMATION

Global Part Numbering: TFPTL10L1001FL2B

TFPTL10L1001FL2B

PRODUCT

TYPE SIZE CHARACTERISTICS RESISTANCE

VALUE TOLERANCE LEAD

CONFIGURATION PACKAGING

TFPT

Leaded

L = Linear 1000 = 100R

1001 = 1K

5001 = 5K

F = ± 1 %

J = ± 5 %

B = Bulk (500 pieces)

U = Ammopack (2500 pieces)

T = T/R (4000 pieces)

P70 x R

TFPTL

www.vishay.com Vishay

Revision: 25-Oct-11 2Document Number: 33027

For technical questions, contact: nlr@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS

Notes

• Bulk packed types have a standard lead length L = 25 mm minimum

• Thickness is defined as “T”

Note

• Zero power is considered as measuring power max. 1 % of rated power P70

TFPTL DIMENSIONS in millimeters

SIZE L10 SIZE L15

L2 H5 L2 H5

Wbmax. 3.6 4.0

Hmax. 3.5 3.8

SHmax. (seating height) 5.0 6.2 5.2 6.5

d0.5 ± 10 %

L25 min.

F 2.5 ± 0.8 5.0 ± 0.8 2.5 ± 0.8 5.0 ± 0.8

Tmax. 2.2 2.4

T Wb

Component outline for

lead spacing 5.0 mm ± 0.8 mm

(flat bent leads)

Component outline for

lead spacing 2.5 mm ± 0.8 mm

(straight leads)

102F

471J

- 75 - 50 - 25 0 25 50 75 100 125 150 175

100

110

Temperature in °C

Power in % of P

Power Derating

TFPTL

www.vishay.com Vishay

Revision: 25-Oct-11 3Document Number: 33027

For technical questions, contact: nlr@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) TFPTs are ESD sensitive

PERFORMANCE

TEST MAXIMUM ΔR25/R25 (1)

Storage dry heat (5000 h at 125 °C) ± 0.25 %

High temperature exposure (1000 h at 150 °C) ± 0.3 %

Damp heat steady state, unloaded (1344 h at 40 °C/95 % RH) ± 0.2 %

Thermal cycling (15 min at -55 °C, 15 min at 150 °C, 100 cycles) ± 0.2 %

Thermal cycling (15 min at -55 °C, 15 min at 125 °C, 1000 cycles) ± 0.2 %

Short time overload (2.5 x P70 for 60s at 70 °C) ± 0.2 %

Long term dissipation (1000 h rated power at 70 °C) ± 0.2 %

Resistance to soldering heat (10 s at 260 °C) ± 0.25 %

AVERAGE RATIO R/R25 TFPTL ALL SIZES AND VALUES

TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25

-20 0.825 20 0.980 60 1.150 100 1.337 140 1.541

-19 0.828 21 0.984 61 1.155 101 1.342 141 1.547

-18 0.832 22 0.988 62 1.159 102 1.347 142 1.552

-17 0.836 23 0.992 63 1.164 103 1.352 143 1.557

-16 0.839 24 0.996 64 1.168 104 1.357 144 1.563

-55 0.702 -15 0.843 25 1.000 65 1.173 105 1.362 145 1.568

-54 0.705 -14 0.847 26 1.004 66 1.177 106 1.367 146 1.574

-53 0.708 -13 0.851 27 1.008 67 1.182 107 1.372 147 1.579

-52 0.712 -12 0.854 28 1.012 68 1.186 108 1.377 148 1.584

-51 0.715 -11 0.858 29 1.017 69 1.191 109 1.382 149 1.590

-50 0.719 -10 0.862 30 1.021 70 1.196 110 1.387 150 1.595

-49 0.722 -9 0.866 31 1.025 71 1.200 111 1.392

-48 0.725 -8 0.869 32 1.029 72 1.205 112 1.397

-47 0.729 -7 0.873 33 1.033 73 1.209 113 1.402

-46 0.732 -6 0.877 34 1.037 74 1.214 114 1.407

-45 0.736 -5 0.881 35 1.042 75 1.219 115 1.412

-44 0.739 -4 0.885 36 1.046 76 1.223 116 1.417

-43 0.743 -3 0.889 37 1.050 77 1.228 117 1.422

-42 0.746 -2 0.892 38 1.054 78 1.232 118 1.427

-41 0.749 -1 0.896 39 1.059 79 1.237 119 1.432

-40 0.753 0 0.900 40 1.063 80 1.242 120 1.437

-39 0.756 1 0.904 41 1.067 81 1.246 121 1.442

-38 0.760 2 0.908 42 1.071 82 1.251 122 1.448

-37 0.763 3 0.912 43 1.076 83 1.256 123 1.453

-36 0.767 4 0.916 44 1.080 84 1.261 124 1.458

-35 0.771 5 0.920 45 1.084 85 1.265 125 1.463

-34 0.774 6 0.924 46 1.089 86 1.270 126 1.468

-33 0.778 7 0.927 47 1.093 87 1.275 127 1.473

-32 0.781 8 0.931 48 1.097 88 1.280 128 1.478

-31 0.785 9 0.935 49 1.102 89 1.284 129 1.484

-30 0.788 10 0.939 50 1.106 90 1.289 130 1.489

-29 0.792 11 0.943 51 1.110 91 1.294 131 1.494

-28 0.796 12 0.947 52 1.115 92 1.299 132 1.499

-27 0.799 13 0.951 53 1.119 93 1.303 133 1.505

-26 0.803 14 0.955 54 1.124 94 1.308 134 1.510

-25 0.806 15 0.959 55 1.128 95 1.313 135 1.515

-24 0.810 16 0.963 56 1.133 96 1.318 136 1.520

-23 0.814 17 0.967 57 1.137 97 1.323 137 1.526

-22 0.817 18 0.971 58 1.141 98 1.328 138 1.531

-21 0.821 19 0.975 59 1.146 99 1.333 139 1.536

TFPTL

www.vishay.com Vishay

Revision: 25-Oct-11 4Document Number: 33027

For technical questions, contact: nlr@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATIO FORMULA

RT = R25 x (9.0014 x 10-1 + 3.87235 x 10-3 (°C)-1 x T + 4.86825 x 10-6 (°C)-2 x T2 + 1.37559 x 10-9 (°C)-3 x T3)

T(°C) = 28.54 x (RT/R25)3 - 158.5 x (RT/R25)2 + 474.8 x (RT/R25) - 319.85)

Ratio Tolerance Examples:

At 40 °C, ratio = 1.063 ± 0.5 % (0.005)

so, ratio = 1.058 to 1.068

At 125 °C, ratio = 1.460 ± 3 % (0.044)

so, ratio = 1.416 to 1.504

RATIO TOLERANCES

LOW TEMP. HIGH TEMP. TOL.

-55 °C +150 °C ± 4 %

-40 °C +125 °C ± 3 %

-20 °C +85 °C ± 2 %

0 °C +55 °C ± 1 %

+12 °C +40 °C ± 0.5 %

- 75 - 50 - 25 0 25 50 75 100 125 150

0.6

0.7

0.8

0.9

1.0

1.1

1.2

1.3

1.4

1.6

1.5

1.7

Temperature in °C

Ratio

Ratio RT/R25

Max.

Min.

Max.

Min.

- 75 - 50 - 25 0 25 50 75 100 150

Temperature in °C

TCR in ppm/K

TCR Typical Value

3600

3700

3800

3900

4000

4100

4200

4300

4400

4600

4500

4800

4700

125

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

TFPTL10L1000FH5B TFPTL10L1000FL2B TFPTL10L1001FL2B TFPTL10L4700FH5B TFPTL10L4700FL2B

TFPTL10L8200FL2B TFPTL15L1501FL2B TFPTL15L2200FL2B TFPTL15L2201JL2B TFPTL15L3901FL2B

TFPTL15L3901JH5B TFPTL15L5001FH5B TFPTL15L5001FL2B