YFZVFHTR4.7B - ROHM SEMICONDUCTOR

Datasheet

www.rohm.com

Zener Diode

YFZVFH series

AEC-Q101 Q ualified

Application Dimensions (Unit : mm) Land size figure (Unit : mm)

Voltage r egulation

Features

1) Small power mold type (T UMD2M)

2) High r eliability

3) By chip-mouter,

automatic m outing is possible.  Structure

Construction

Silicon epitaxial planar Taping dimensions (Unit : mm)

Absolute maximum rati ngs (T

= 25°C)

Power dissipation ()PmW

Junction temperat ur e T

°C

Storag e t em perature T

stg

°C

Operating temperat ur e T

opr

°C

() Device mounted on glass-epoxy board(50×50mm, t = 1.6mm) Solder land ( 10×10m m)

Parameter Symbol Limits

55 to 150

Unit

500

150

55 to 150

Anode

Cathode

dot (year week factory) day

ROHM : TUMD2M

EX. YFZVFH3.6B

1.40 0.10

0.80 0.05

2.50 0.20

2.00 0.10

0.60

0～

0.10

0.20

0.10

0.170.10

0.05

TUMD2M

1.1

2.0

0.8 0.5

4.0±0.1 2.0±0.05 φ1.55±0.1

1.43±0.05 4.0±0.1 φ1.0±0.2

2.75

3.5±0.05 1.75±0.1

8.0±0.2

0.25±0.05

0.9±0.08

2.8±0.05

1.55 0.1

1.0 0.2

1/6 2015.12 - Rev.C

www.rohm.com

Data Sheet

YFZVFH series

Electrical charact eri st i cs (T

= 25°C)

MIN. MAX. I

(mA) MAX. I

(mA) MAX. V

(V)

YFZV 2.0B 2.020 2.200 20 140 20 120 0.5

YFZV 2.2B 2.220 2.410 20 120 20 120 0.7

YFZV 2.4B 2.430 2.630 20 100 20 120 1.0

YFZV 2.7B 2.690 2.910 20 100 20 100 1.0

YFZV 3.0B 3.010 3.220 20 80 20 50 1.0

YFZV 3.3B 3.320 3.530 20 70 20 20 1.0

YFZV 3.6B 3.600 3.845 20 60 20 10 1.0

YFZV 3.9B 3.890 4.160 20 50 20 5 1.0

YFZV 4.3B 4.170 4.430 20 40 20 5 1.0

YFZV 4.7B 4.550 4.800 20 25 20 5 1.0

YFZV 5.1B 4.940 5.200 20 20 20 5 1.5

YFZV 5.6B 5.450 5.730 20 13 20 5 2.5

YFZV 6.2B 5.960 6.270 20 10 20 5 3.0

YFZV 6.8B 6.490 6.830 20 8 20 2 3.5

YFZV 7.5B 7.070 7.450 20 8 20 0.5 4.0

YFZV 8.2B 7.780 8.190 20 8 20 0.5 5.0

YFZV 9.1B 8.570 9.010 20 8 20 0.5 6.0

YFZV 10B 9.410 9.900 20 8 20 0.2 7.0

YFZV 11B 10.500 11.050 10 10 10 0.2 8.0

YFZV 12B 11.440 12.030 10 12 10 0.2 9.0

YFZV 13B 12.550 13.210 10 14 10 0.2 10

YFZV 15B 13.890 14.620 10 16 10 0.2 11

YFZV 16B 15.250 16.040 10 18 10 0.2 12

YFZV 18B 16.820 17.700 10 23 10 0.2 13

YFZV 20B 18.630 19.590 10 28 10 0.2 15

YFZV 22B 20.640 21.710 530 5 0.217

YFZV 24B 22.610 23.770 535 5 0.219

YFZV 27B 24.970 26.260 545 5 0.221

YFZV 30B 27.700 29.130 555 5 0.223

YFZV 33B 30.320 31.880 565 5 0.225

YFZV 36B 32.790 34.490 575 5 0.227

YFZV 39B 35.360 37.190 585 5 0.230

(1) The zener voltage(V

) is measured 40ms after power is supplied.

(2) The Dynamic Impedance(Z

) are measured by superimposing a minute alternating current

on the regulated current(I

)

MA RKING (TYPE NO.)

TYP. Reverse current :

(A)

Symbol

Zener voltage : V

(V) Dynamic Impedance :

()

TYPE TYPE

Y F ZV 2.0B N 0 Y F ZV 9.1B N G

Y F ZV 2.2B N 1 Y F ZV 10 B N H

Y F ZV 2.4B N 2 Y F ZV 11 B N J

Y F ZV 2.7B N 3 Y F ZV 12 B N K

Y F ZV 3.0B N 4 Y F ZV 13 B N L

Y F ZV 3.3B N 5 Y F ZV 15 B N M

Y F ZV 3.6B N 6 Y F ZV 16 B N N

Y F ZV 3.9B N 7 Y F ZV 18 B N P

Y F ZV 4.3B N 8 Y F ZV 20 B N Q

Y F ZV 4.7B N 9 Y F ZV 22 B N R

Y F ZV 5.1B N A YF ZV 24 B N S

Y F ZV 5.6B N B YF ZV 27 B N T

Y F ZV 6.2B N C Y FZV 30 B N U

Y F ZV 6.8B N D Y FZV 33 B N V

Y F ZV 7.5B N E YF ZV 36 B N W

Y F ZV 8.2B N F Y F ZV 39 B N X

TYPE　NO. TYPE　NO.

2/6 2015.12 - Rev.C

www.rohm.com

Data Sheet

YFZVFH series

Electrical charact eri st i c curves

ZENER CURRENT : IZ(mA)

ZENER VOLT AGE : VZ(V)

VZ -IZCHARACTERISTICS

0.001

0.01

0.1

100

0 5 10 15 20 25 30 35 40

3.3

3.0

2.7

2.4

2.2

2.0

22 30

27 39

3.6 9.1

8.2

7.5

5.6 6.8

6.2

5.1

4.7

4.3

3.9

3/6 2015.12 - Rev.C

www.rohm.com

Data Sheet

YFZVFH series

Electrical charact eri st i c curves

100

200

300

400

500

600

0 50 100 150 200 1

100

1000

10000

0.001 0.01 0.1 1 10

-10

-5

-0.1

-0.08

-0.06

-0.04

-0.02

0.02

0.04

0.06

0.08

0.1

0 5 10 15 20 25 30 35 40

mV/°C

%/°C

POWER DISPERSION : Pd(mW)

AMBIENT TEMPERATURE : T a(°C)

Pd-TaCHARACTERISTICS

REVERS SURGE MAXIMUM

POWER : PRSM(W)

TIME : t(ms)

PRSM-TIME CHARACT ERIST ICS

PRSM

1pulse

TEMP.COEFFICIENCE : Z(%/°C)

ZENER VOLT AGE : VZ(V)

Z -VZCHARACTERISTICS

TEMP.COEFFICIENCE : Z(mV/°C)

4/6 2015.12 - Rev.C

www.rohm.com

Data Sheet

YFZVFH3.0B

Electrical Charact eri st i c Curves

ZENER CURRENT : IZ(mA)

ZENER VOLT AGE : VZ(V)

VZ -IZCHARACTERISTICS

REVERSE CURRENT : IR(A)

REVERSE VO LTAGE : VR(V)

VR-IRCHARACTERISTICS

CAPACITANCE BET W EEN

TERMINALS : Ct(pF)

REVERSE VO LTAGE : VR(V)

VR-CtCHARACTERISTICS

ZENER VOLT AGE : VZ(V)

VZDISPERSION MAP

0.0001

0.001

0.01

0.1

100

1000

00.511.52

Ta= 75°C

Ta= 25°C

Ta= 125°C

0.001

0.01

0.1

100

01234

Ta= 125°C

Ta= 75°C

Ta= 25°C

Ta= 25°C

100

1000

00.511.52

f = 1MHz

3.1

3.2

3.3

3.4

3.5

AVE. : 3.120V

Ta=25°C

IZ=20mA

n=30pcs

5/6 2015.12 - Rev.C

www.rohm.com

Data Sheet

YFZVFH3.0B

Electrical Charact eri st i c Curves

REVERSE CURRENT : IR(A)

IRDISPERSION MAP

CAPACITANCE BET W EEN

TERMINALS : Ct(pF)

CtDISPERSION MAP

DYNAMIC IMPEDANCE : ZZ()

ZENER CURRENT : IZ(mA)

ZZ -IZCHARACTERISTICS

5Ta=25°C

VR=1.0V

n=30pcs

AVE. : 2.337A

400

420

440

460

480

500 Ta=25°C

f=1MHz

VR=0V

n=10pcs

AVE. : 431.1pF

100

1000

10000

100000

0.1 1 10

6/6 2015.12 - Rev.C

Datasheet

Notice-PAA-E Rev.001

Notice

Precaution on using ROHM Products

1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1),

aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,

bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales

representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses incurred b y you or third parties arising from the use of an y

ROHM’s Products for Specific Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN USA EU CHINA

CLASSⅢ CLASSⅢ CLASSⅡb CLASSⅢ

CLASSⅣ CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe d esign against the physical injur y, damage to any property, which

a failure or malfunction of our Products may cause. T he following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.

Accordingly, ROHM shall not be in any way responsible or liable for any damages, expens es or losses arising from the

use of any ROHM’s Products under an y special or extraordinary envir onments or conditions. If you intend to use our

Products under any special or extraordinary environments or conditions (as exemplified below), your independent

verification and confirmation of product perfor mance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlig ht or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing comp onents, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flu x (even if you use no-clean type fluxes, cleaning residue of

flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning

residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Pro ducts.

6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7. De-rate Power Dissipation (P d) depe nding on Ambient temper ature (Ta). When us ed in sealed area, confirm the actual

ambient temperature.

8. Confirm that operation temperature is within the specified range described in the product specification.

9. ROHM shall not be in any way responsible or lia ble for failure induced under deviant conditio n from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halog enous (chlor ine, bromine, etc.) flux is used, the residue of flux ma y negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM represe ntative in advance.

For details, please refer to ROHM Mounting specification

Datasheet

Notice-PAA-E Rev.001

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise you r own indepen dent verificati on and judgme nt in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please t ake special care under dry condit ion (e.g. Grounding of human body / equipment / sol der iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportati on

1. Product performance a nd soldered connections may deteriorate if the Products are store d in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderabil ity of products out of recommended storage time perio d

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommen de d storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive s t ress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Pr oducts of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

QR code printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products pl ease dispose them properly using an auth orized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoi ng information or data will not infringe any int ellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained i n this document. Provide d, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including b ut not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

DatasheetDatasheet

Notice – WE Rev.001

General Precaution

1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.

ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the la test information with a ROHM sale s

representative.

3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or

liable for any damages, expenses or losses incurred by you or third parties resulting from inaccuracy or errors of or

concerning such information.