LITE-ON SEMICONDUCTOR GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS SA SERIES REVERSE VOLTAGE - 5.0 to 170 Volts POWER DISSIPATION - 500 WATTS DO-15 FEATURES Glass passivated chip Low leakage Uni and Bidirectional unit Excellent clamping capability The plastic material has U/L recognition 94V-O Fast response time A A B C D MECHANICAL DATA Case : Molded Plastic Marking : Unidirectional - type number and cathode band Bidirectional - type number only Weight : 0.34 grams DO-15 Dim. A B C D Min. Max. 25.4 5.80 7.60 0.71 0.86 2.60 3.60 All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% CHARACTERISTICS SYMBOLS VALUE PEAK POWER DISSIPATION AT TA = 25 , TP = 1ms (Note 1) PPK 500 Peak Forward Surge Current 8.3ms single half sine-wave @ TJ = 25 , (Note 2) IFSM 70 AMPS. PM(AV) 2.0 WATTS MaximumInstantaneous forward voltage at 35A for unidirectional devices only VF 3.5 Volts Operating Temperature Range TJ -55 to +175 C TSTG -55 to +175 C Steady State Power Dissipation at TL =120 lead lenghts 0.375" (9.5mm) , see fig. 4 Storage Temperature Range UNIT WATTS REV. 7, Nov-2010, KDID01 NOTES : 1. Non-repetitive current pulse, per fig. 5 and derated above TA= 25 C per fig. 1 2. 8.3ms single half sine-wave duty cycle= 4 pulses per minutes maximum (uni-directional units only). RATING AND CHARACTERISTIC CURVES SA SERIES FIG.2 - TYPICAL JUNCTION CAPACITANCE 100 10000 CAPACITANCE , (pF) PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 75 50 25 1000 UNIDIRECTIONAL BIDIRECTIONAL 100 TJ =25 C MEASURED AT STAND-OFF VOLTAGE 10 X 1000 WAVEFORM AS DEFINED BY R.E.A. 10 0 0 25 50 75 125 100 150 175 1 200 AMBIENT TEMPERATURE, 10 SINE WAVE SQUARE WAVE TA =25 C Non-repetive Pulse Waveform Shown in Figure 5 0.1 1.0us 10us 100us 1.0ms 10ms PM(AV), STEADY STATE POWER DISSIPATION (W) IMPULSE FIG.4 - STEADY STATE POWER DERATING CURVE 4.0 3.0 2.0 1.0 60Hz RESISTIVE OR INDUCTIVE LOAD 0.0 0 25 50 75 100 125 TL, LEAD TEMPERATURE FIG.5 - PULSE WAVEFORM TR=10us Peak value (IRSM) 100 Half value= IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM 50 10 x 1000 waveform as defined by R.E.A. TJ=25 C TP 0 0 1000 5.0 TP, PULSE WIDTH IP, PEAK PULSE CURRENT , (% ) PP, PEAK POWER ( KW ) 100 0.1us 100 REVERSE VOLTAGE , VOLTS FIG.3 - PULSE RATING CURVE 1.0 10 4 1.0 2.0 T , TIME ( ms ) 3.0 4.0 150 175 200 LITE-ON SEMICONDUCTOR Type Number Type Number Reverse Standoff Voltage Max. Clamping Voltage @Ipp Breakdown Voltage BV Volts @It Max. Max. Reverse Peak Leakage @VR Pulse Current VR (V) Min (V) Max (V) It (mA) Vc (V) Ipp (A) IR (uA) SA5.0A SA5.0CA 5.0 6.40 7.07 10 9.2 54.3 600 SA6.0A SA6.0CA 6.0 6.67 7.37 10 10.3 48.5 600 SA6.5A SA6.5CA 6.5 7.22 7.98 10 11.2 44.6 400 SA7.0A SA7.0CA 7.0 7.78 8.60 10 12.0 41.7 150 SA7.5A SA7.5CA 7.5 8.33 9.21 1 12.9 38.8 50 SA8.0A SA8.0CA 8.0 8.89 9.83 1 13.6 36.8 25 SA8.5A SA8.5CA 8.5 9.44 10.43 1 14.4 34.7 10 SA9.0A SA9.0CA 9.0 10.0 11.1 1 15.4 32.5 5 SA10A SA10CA 10 11.1 12.3 1 17.0 29.4 3 SA11A SA11CA 11 12.2 13.5 1 18.2 27.5 3 SA12A SA12CA 12 13.3 14.7 1 19.9 25.1 3 SA13A SA13CA 13 14.4 15.9 1 21.5 23.3 3 SA14A SA14CA 14 15.6 17.2 1 23.2 21.6 3 SA15A SA15CA 15 16.7 18.5 1 24.4 20.5 3 SA16A SA16CA 16 17.8 19.7 1 26.0 19.2 3 SA17A SA17CA 17 18.9 20.9 1 27.6 18.1 3 SA18A SA18CA 18 20.0 22.1 1 29.2 17.1 3 SA20A SA20CA 20 22.2 24.5 1 32.4 15.4 3 SA22A SA22CA 22 24.4 27.0 1 35.5 14.1 3 SA24A SA24CA 24 26.7 29.5 1 38.9 12.9 3 SA26A SA26CA 26 28.9 31.9 1 42.1 11.9 3 SA28A SA28CA 28 31.1 34.4 1 45.4 11.0 3 SA30A SA30CA 30 33.3 36.8 1 48.4 10.3 3 SA33A SA33CA 33 36.7 40.6 1 53.3 9.4 3 SA36A SA36CA 36 40.0 44.2 1 58.1 8.6 3 SA40A SA40CA 40 44.4 49.1 1 64.5 7.8 3 SA43A SA43CA 43 47.8 52.8 1 69.4 7.2 3 SA45A SA45CA 45 50.0 55.3 1 72.7 6.9 3 SA48A SA48CA 48 53.3 58.9 1 77.4 6.5 3 SA51A SA51CA 51 56.7 62.7 1 82.4 6.1 3 SA54A SA54CA 54 60.0 66.3 1 87.1 5.7 3 SA58A SA58CA 58 64.4 71.2 1 93.6 5.3 3 SA60A SA60CA 60 66.7 73.7 1 96.8 5.2 3 SA64A SA64CA 64 71.1 78.6 1 103.0 4.9 3 SA70A SA70CA 70 77.8 86.0 1 113.0 4.4 3 SA75A SA75CA 75 83.3 92.1 1 121.0 4.1 3 SA78A SA78CA 78 86.7 95.8 1 126.0 4.0 3 SA85A SA85CA 85 94.4 104.3 1 137.0 3.6 3 SA90A SA90CA 90 100 110.5 1 146.0 3.4 3 SA100A SA100CA 100 111 122.7 1 162.0 3.1 3 SA110A SA110CA 110 122 134.8 1 177.0 2.8 3 SA120A SA120CA 120 133 147.0 1 193.0 2.6 3 SA130A SA130CA 130 144 159.2 1 209.0 2.4 3 SA150A SA150CA 150 167 184.6 1 243.0 2.1 3 SA160A SA160CA 160 178 196.7 1 259.0 1.9 3 SA170A SA170CA 170 189 208.9 1 275.0 1.8 3 (UNI) (BI) NOTE : Suffix'C' denotes Bi-directional device. Suffix'A' denotes 5% tolerance device. 1. For Bi-directional devices having VR of 10 volts and under,the IR limit is doubled . 2. For Uni-directional devices VF max=3.5V at IF=35A, 0.5 sine wave of 8.33 msec. pulse width . Legal Disclaimer Notice SA SERIES Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.