Multilayer ceramic capacitors Chip capacitors, Advanced series, C0G and X7R Date: October 2006 Data Sheet a EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS' prior express consent is prohibited. Multilayer ceramic capacitors Chip Advanced series General Criteria for high reliability For both OEMs and component manufacturers, high reliability is assured by consistent process control. If it is assumed that the component manufacturer supplies a defect-free product, then further correct processing by the customer forms the basis for perfect operation of the components and thus the entire application. So the precondition for high quality is not exclusively a particular "intermediate product" (such as the ceramic capacitor) but rather the process control along the entire production chain up to its end point. This requires a high degree of mutual process understanding between the various partners (e.g. component manufacturer and placement operator) and the formulation of joint quality guidelines. AEC-Q200 is a standard for quality requirements on components in various technologies. In view of its general character, AEC-Q200 does not apply to every component to the same extent and thus defines a minimum requirement on quality. AEC-Q200 stipulates the observance of limits that can be checked by means of a good/bad decision. It therefore permits a qualitative statement but not a quantitative one. However, it is precisely the latter that is important if we wish to approach "zero defects". So process control moves to center stage and becomes the decisive element for ensuring and continuously improving the maximum possible reliability. EPCOS has implemented this paradigm change and thus laid the foundation for a zero defect strategy. This concept is integrated in the "ppb level assurance system" and is particularly realized and continuously developed further in the Advanced series. The requirements made on the Advanced series exceed those of AEC-Q200. The criteria are clearly oriented to the aim of achieving "zero defects". An important precondition for high component reliability is the production of the ceramic powder at our own plant. Only by knowing all the interrelationships and effects from the raw material to the completed component can the self-imposed quality criteria actually be implemented in all production steps. EPCOS has been developing and manufacturing its own ceramic powder for ceramic capacitors for many years so that the component quality can be assured from the first step of manufacture. ppb level assurance system The precondition for reliability at ppb level is, apart from process knowledge, a high degree of process control. To achieve this, the entire production process is subdivided systematically into subprocesses that are continuously checked with static methods on the basis of quantifiable parameters. These analysis methods are used by EPCOS within the scope of the Advanced series for all production steps from ceramic powder production and component design up to the 100% electrical testing. Please read Cautions and warnings and Important notes at the end of this document. 2 10/06 Multilayer ceramic capacitors Chip Advanced series In summary, the ppb level assurance system involves the following points: Statistical methods for component design and process control Use of the Weibull method for statistical data analysis Introduction of quantifiable parameters (such as the failure time) to replace the previous "good" or "bad" decisions Dynamic test limits as a complement to fixed limits in the 100% electrical test (capacitance C, loss factor tan d, insulation resistance Rins) Periodic check of the solder-shock resistance at 360 C, followed by a burn-in test or HALT Periodic check of the bending strength by the rigorous piezoelectric method (DI measurement) for X7R A more accurate characterization of the mechanical properties by eliminating impacting factors by taking measurements on the sintered component 100% automatic optical inspection (AOI) Ultrasound analysis allowing an internal defect in the ceramic capacitor to be detected in a nondestructive way High temperature application: The listed Advanced series types can be used at 100% rated DC voltage up to 125 C. Operation of Advanced capacitors at temperatures >125 C up to 150 C is permissible if the applied voltage is reduced according to the derating diagram below proceeding from a stress level of 100% rated voltage at 125 C. Note: To achieve highest reliability levels it is generally recommended not to operate ceramic capacitors continuously at 100% rated voltage. Please see chapter "Reliability" for recommended operating voltage and calculation of failure rates. KKE0433-M-E 100 % Maximum allowed DC voltage (V/VR) 90 C0G and X7R NME 80 X7R BME and HighCV 70 60 50 125 130 135 140 145 C T Please read Cautions and warnings and Important notes at the end of this document. 3 10/06 150 Multilayer ceramic capacitors Chip Advanced series; C0G Ordering code system B37940 A 5 010 C 5 60 Packaging 60 62 70 72 ^ ^ ^ ^ cardboard tape, 180-mm reel blister tape, 180-mm reel cardboard tape, 330-mm reel blister tape, 330-mm reel Decimal place for cap. values <10 pF, otherwise 0 Capacitance tolerance CR <10 pF: CR 10 pF: Capacitance, coded (example) Rated voltage Internal coding C ^ 0.25 pF (standard for capacitance values <10 pF) J ^ 5% (standard) 010 ^ 1 * 100 pF = 1 pF 100 ^ 10 * 100 pF = 10 pF 221 ^ 22 * 101 pF = 220 pF Rated voltage [VDC] Code 50 5 "A" indicates Advanced series Type and size Chip size (inch / mm) Temperature characteristic C0G 0402 / 1005 0603 / 1608 0805 / 2012 1206 / 3216 B37920 B37930 B37940 B37871 Please read Cautions and warnings and Important notes at the end of this document. 4 10/06 100 1 Multilayer ceramic capacitors Chip Advanced series; X7R Ordering code system B37941 A 5 102 K 0 60 Packaging 60 62 70 72 ^ ^ ^ ^ cardboard tape, 180-mm reel blister tape, 180-mm reel cardboard tape, 330-mm reel blister tape, 330-mm reel Internal coding Capacitance tolerance K ^ 10% (standard) Capacitance, coded (example) Rated voltage Internal coding 102 ^ 10 * 102 pF = 1 nF 104 ^ 10 * 104 pF = 100 nF 223 ^ 22 * 103 pF = 22 nF Rated voltage [VDC] Code 25 0 "A" indicates Advanced series Type and size Chip size (inch / mm) Temperature characteristic X7R 0603 / 1608 0805 / 2012 1206 / 3216 B37931 B37941 B37872 Please read Cautions and warnings and Important notes at the end of this document. 5 10/06 50 5 100 1 Chip Multilayer ceramic capacitors Advanced series; C0G and X7R Features ppb level assurance system Optimized bending and solder-shock strength due to simultaneous availability of BME and NME technologies May be used at temperatures of up to 150 C Short-term use up to 175 C without electrical stressing possible Marking with date code To AEC-Q200 Applications Use in safety-relevant applications, e.g. in the automotive sector: - ABS, ESP and airbag Use in applications with particularly high quality requirements, e.g. in the automotive, industrial, consumer and telecommunications industries: - Mobile phone base stations - High-end consumer electronics Termination For soldering: Nickel barrier terminations (Ni) Options Alternative capacitance tolerances available on request Delivery mode Cardboard and blister tape (blister tape for chip thickness 1.2 0.1 mm), 180-mm and 330-mm reel available Electrical data C0G Temperature characteristic Climatic category (IEC 60068-1) Standard Dielectric Rated voltage Test voltage Capacitance range / E series Temperature coefficient Dissipation factor (limit value) Insulation resistance1) at + 25 C Insulation resistance1) at +125 C Time constant1) at + 25 C Time constant1) at +125 C Operating temperature range Ageing VR Vtest CR tan d Rins Rins t t Top 1) For CR >10 nF the time constant t = C * Rins is given. Please read Cautions and warnings and Important notes at the end of this document. 6 10/06 C0G 55/125/56 EIA Class 1 50, 100 2.5 * VR/5 s 1 pF ... 4.7 nF (E6) 0 30 * 10 -6/K <1.0 * 10 -3 >105 >104 >1000 >100 -55 ... +125 none VDC VDC MW MW s s C Multilayer ceramic capacitors Advanced series Advanced series; C0G and X7R Electrical data X7R Temperature characteristic Max. relative capacitance change within -55 C to +125 C Climatic category (IEC 60068-1) Standard Dielectric Rated voltage1) Test voltage Capacitance range / E series Dissipation factor (limit value) Insulation resistance 2) at + 25 C Insulation resistance 2) at +125 C Time constant 2) at + 25 C Time constant 2) at +125 C Operating temperature range Ageing 3) X7R DC/C VR Vtest CR tan d Rins Rins t t Top Capacitance tolerances C0G Code letter Tolerance 15 55/125/56 EIA Class 2 25; 50; 100 2.5 * VR/5 s 1 nF ... 1 mF (E6) <25 * 10 -3 / <50 * 10 -3 for 25 V >105 >104 >1000 >100 -55 ... +125 yes % VDC VDC MW MW s s C Capacitance tolerances X7R CR <10 pF CR 10 pF C (standard) 0.25 pF J (standard) 5% Code letter Tolerance K (standard) 10% Dimensional drawing s b k k KKE0329-N Dimensions (mm) Case size inch / mm l b s k 0402 / 1005 0603 / 1608 0805 / 2012 1206 / 3216 1.0 0.10 0.5 0.05 0.5 0.05 0.1 -0.40 1.6 0.15 0.8 0.10 0.8 0.10 0.1 -0.40 2.00 0.20 1.25 0.15 1.30 max. 0.13 -0.75 3.20 0.20 1.60 0.15 1.30 max. 0.25 -0.75 Tolerances to CECC 32101-801 1) Note: No operation on AC line. 2) For CR >10 nF the time constant t = C * Rins is given. 3) Refer to chapter "General technical information", "Ageing". Please read Cautions and warnings and Important notes at the end of this document. 7 10/06 Multilayer ceramic capacitors Advanced series Advanced series; C0G and X7R Recommended solder pad C A D KKE0308-1 Recommended dimensions (mm) for reflow soldering Case size (inch/mm) Type A C D 0402/1005 single chip 0.35 ... 0.45 1.0 ... 1.40 0.4 ... 0.6 0603/1608 single chip 0.60 ... 0.70 1.8 ... 2.20 0.6 ... 0.8 0805/2012 single chip 0.60 ... 0.70 2.2 ... 2.60 0.8 ... 1.1 1206/3216 single chip 0.80 ... 0.90 3.8 ... 4.32 1.0 ... 1.4 Recommended dimensions (mm) for wave soldering Case size (inch/mm) Type A C D 0603/1608 single chip 0.8 ... 0.9 2.2 ... 2.8 0.6 ... 0.8 0805/2012 single chip 0.9 ... 1.0 2.8 ... 3.2 0.8 ... 1.1 1206/3216 single chip 1.0 ... 1.1 4.2 ... 4.8 1.0 ... 1.4 Termination Termination (nickel barrier) Ceramic body Inner electrode NME AgPd BME HighCV Ni Ni Substrate electrode Intermediate electrode External electrode NME Ag Ni Sn BME HighCV Cu Cu Ni Ni Sn Sn NME: Noble Metal Electrode BME: Base Metal Electrode Please read Cautions and warnings and Important notes at the end of this document. 8 10/06 KKE0424-N-E Multilayer ceramic capacitors Advanced series Advanced series; C0G Product range for Advanced series chip capacitors, C0G Size1) inch mm Type VR (VDC) CR 0402 1005 0603 1608 0805 2012 1206 3216 B37920 B37930 B37940 B37871 50 50 100 1.0 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10 pF 15 pF 22 pF 33 pF 47 pF 68 pF 100 pF 220 pF 330 pF 470 pF 680 pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 1) l b (inch) / l b (mm) Please read Cautions and warnings and Important notes at the end of this document. 9 10/06 50 100 50 100 Multilayer ceramic capacitors Advanced series Advanced series; X7R Product range for Advanced series chip capacitors, X7R Size1) inch mm Type VR (VDC) CR 25 0603 1608 0805 2012 1206 3216 B37931 B37941 B37872 50 100 25 50 1.0 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 47 nF 68 nF 100 nF 220 nF 330 nF 470 nF 1.0 mF = HighCV 1) l b (inch) / l b (mm) Please read Cautions and warnings and Important notes at the end of this document. 10 10/06 100 50 100 Multilayer ceramic capacitors Advanced series; C0G; 0402 Advanced series Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 0402, 50 VDC Chip thickness CR1) 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF Ordering code B37920A5030C3** B37920A5040C7** B37920A5060C8** B37920A5100J0** B37920A5150J0** B37920A5220J0** B37920A5330J0** B37920A5470J0** B37920A5680J0** B37920A5101J0** Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 mm 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 0.5 0.05 1) Other capacitance values on request. Please read Cautions and warnings and Important notes at the end of this document. 11 10/06 Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 50000 50000 50000 50000 50000 50000 50000 50000 50000 50000 Advanced series Multilayer ceramic capacitors Advanced series; C0G; 0603 Ordering codes and packing for C0G, 50 and 100 VDC, nickel barrier terminations Case size 0603, 50 VDC Chip thickness CR1) 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF 470. pF Ordering code B37930A5010C0** B37930A5010C5** B37930A5020C2** B37930A5030C3** B37930A5040C7** B37930A5060C8** B37930A5100J0** B37930A5150J0** B37930A5220J0** B37930A5330J0** B37930A5470J0** B37930A5680J0** B37930A5101J0** B37930A5151J0** B37930A5221J0** B37930A5331J0** B37930A5471J0** mm 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 Case size 0603, 100 VDC 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF B37930A1010C0** B37930A1010C5** B37930A1020C2** B37930A1030C3** B37930A1040C7** B37930A1060C8** B37930A1100J0** B37930A1150J0** B37930A1220J0** B37930A1330J0** B37930A1470J0** B37930A1680J0** B37930A1101J0** B37930A1151J0** B37930A1221J0** 1) Other capacitance values on request. Please read Cautions and warnings and Important notes at the end of this document. 12 10/06 Multilayer ceramic capacitors Advanced series; C0G; 0805 Advanced series Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 0805, 50 VDC Chip thickness CR1) 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF Ordering code B37940A5010C0** B37940A5010C5** B37940A5020C2** B37940A5030C3** B37940A5040C7** B37940A5060C8** B37940A5100J0** B37940A5150J0** B37940A5220J0** B37940A5330J0** B37940A5470J0** B37940A5680J0** B37940A5101J0** B37940A5151J0** B37940A5221J0** B37940A5331J0** B37940A5471J0** B37940A5681J0** B37940A5102J0** B37940A5152J0** B37940A5222J0** Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 3000 2) mm 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.8 0.1 1.2 0.1 1) Other capacitance values on request. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 13 10/06 Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 12000 3) Advanced series Multilayer ceramic capacitors Advanced series; C0G; 0805 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 0805, 100 VDC Chip thickness CR1) 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF 470. pF 680. pF 1.0 nF Ordering code B37940A1010C0** B37940A1010C5** B37940A1020C2** B37940A1030C3** B37940A1040C7** B37940A1060C8** B37940A1100J0** B37940A1150J0** B37940A1220J0** B37940A1330J0** B37940A1470J0** B37940A1680J0** B37940A1101J0** B37940A1151J0** B37940A1221J0** B37940A1331J0** B37940A1471J0** B37940A1681J0** B37940A1102J0** Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 4000 3000 2) mm 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.8 0.1 1.2 0.1 1) Other capacitance values on request. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 14 10/06 Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 20000 16000 12000 3) Multilayer ceramic capacitors Advanced series; C0G; 1206 Advanced series Ordering codes and packing for C0G, 50 VDC, nickel barrier terminations Case size 1206, 50 VDC Chip thickness CR1) 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF Ordering code B37871A5010C0** B37871A5010C5** B37871A5020C2** B37871A5030C3** B37871A5040C7** B37871A5060C8** B37871A5100J0** B37871A5150J0** B37871A5220J0** B37871A5330J0** B37871A5470J0** B37871A5680J0** B37871A5101J0** B37871A5151J0** B37871A5221J0** B37871A5331J0** B37871A5471J0** B37871A5681J0** B37871A5102J0** B37871A5152J0** B37871A5222J0** B37871A5332J0** B37871A5472J0** Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 2) mm 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 1.2 0.1 1) Other capacitance values on request. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 15 10/06 Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 3) Advanced series Multilayer ceramic capacitors Advanced series; C0G; 1206 Ordering codes and packing for C0G, 100 VDC, nickel barrier terminations Case size 1206, 100 VDC Chip thickness CR1) 1.0 pF 1.5 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF 10. pF 15. pF 22. pF 33. pF 47. pF 68. pF 100. pF 150. pF 220. pF 330. pF 470. pF 680. pF 1.0 nF 1.5 nF 2.2 nF Ordering code B37871A1010C0** B37871A1010C5** B37871A1020C2** B37871A1030C3** B37871A1040C7** B37871A1060C8** B37871A1100J0** B37871A1150J0** B37871A1220J0** B37871A1330J0** B37871A1470J0** B37871A1680J0** B37871A1101J0** B37871A1151J0** B37871A1221J0** B37871A1331J0** B37871A1471J0** B37871A1681J0** B37871A1102J0** B37871A1152J0** B37871A1222J0** Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 2) mm 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 1.2 0.1 1) Other capacitance values on request. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 16 10/06 Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 3) Multilayer ceramic capacitors Advanced series; X7R; 0603 Advanced series Ordering codes and packing for X7R, 25, 50 and 100 VDC, nickel barrier terminations mm Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 0.8 0.1 0.8 0.1 0.8 0.1 4000 4000 4000 16000 16000 16000 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 4000 4000 4000 4000 4000 16000 16000 16000 16000 16000 Chip thickness CR1) Ordering code Case size 0603, 25 VDC 68. nF 100. nF 220. nF 2) B37931A0683K0** B37931A0104K0** B37931A0224K0** Case size 0603, 50 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF B37931A5102K0** B37931A5152K0** B37931A5222K0** B37931A5332K0** B37931A5472K0** B37931A5682K0** B37931A5103K0** B37931A5153K0** B37931A5223K0** B37931A5333K0** B37931A5473K0** Case size 0603, 100 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF B37931A1102K0** B37931A1152K0** B37931A1222K0** B37931A1332K0** B37931A1472K0** 1) Other capacitance values on request. 2) HighCV type Please read Cautions and warnings and Important notes at the end of this document. 17 10/06 Advanced series Multilayer ceramic capacitors Advanced series; X7R; 0805 Ordering codes and packing for X7R, 25, 50 and 100 VDC, nickel barrier terminations mm Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 0.8 0.1 0.8 0.1 0.8 0.1 1.25 0.1 4000 4000 4000 3000 3) 16000 16000 16000 12000 4) 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 5000 5000 5000 5000 5000 5000 4000 4000 4000 4000 4000 4000 4000 20000 20000 20000 20000 20000 20000 16000 16000 16000 16000 16000 16000 16000 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.6 0.1 0.8 0.1 5000 5000 5000 5000 5000 5000 5000 5000 4000 20000 20000 20000 20000 20000 20000 20000 20000 16000 Chip thickness CR1) Ordering code Case size 0805, 25 VDC 220. nF 2) 330. nF 2) 470. nF 2) 1.0 mF 2) B37941A0224K0** B37941A0334K0** B37941A0474K0** B37941A0105K0** Case size 0805, 50 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 100. nF B37941A5102K0** B37941A5152K0** B37941A5222K0** B37941A5332K0** B37941A5472K0** B37941A5682K0** B37941A5103K0** B37941A5153K0** B37941A5223K0** B37941A5333K0** B37941A5473K0** B37941A5683K0** B37941A5104K0** Case size 0805, 100 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 1) 2) 3) 4) B37941A1102K0** B37941A1152K0** B37941A1222K0** B37941A1332K0** B37941A1472K0** B37941A1682K0** B37941A1103K0** B37941A1153K0** B37941A1223K0** Other capacitance values on request. HighCV type. Blister tape, 180-mm reel, ordering code ** ^ 62 Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 18 10/06 Multilayer ceramic capacitors Advanced series; X7R; 1206 Advanced series Ordering codes and packing for X7R, 50 and 100 VDC, nickel barrier terminations mm Cardboard tape, AE 180-mm reel ** ^ 60 pcs/reel Cardboard tape, AE 330-mm reel ** ^ 70 pcs/reel 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 1.2 0.1 1.2 0.1 1.2 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 2) 3000 2) 3000 2) 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 3) 12000 3) 12000 3) 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 0.8 0.1 1.2 0.1 1.2 0.1 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 3000 2) 3000 2) 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 16000 12000 3) 12000 3) Chip thickness CR1) Ordering code Case size 1206, 50 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 100. nF 220. nF 330. nF 470. nF B37872A5102K0** B37872A5152K0** B37872A5222K0** B37872A5332K0** B37872A5472K0** B37872A5682K0** B37872A5103K0** B37872A5153K0** B37872A5223K0** B37872A5333K0** B37872A5473K0** B37872A5683K0** B37872A5104K0** B37872A5224K0** B37872A5334K0** B37872A5474K0** Case size 1206, 100 VDC 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10. nF 15. nF 22. nF 33. nF 47. nF 68. nF 100. nF B37872A1102K0** B37872A1152K0** B37872A1222K0** B37872A1332K0** B37872A1472K0** B37872A1682K0** B37872A1103K0** B37872A1153K0** B37872A1223K0** B37872A1333K0** B37872A1473K0** B37872A1683K0** B37872A1104K0** 1) Other capacitance values on request. 2) Blister tape, 180-mm reel, ordering code ** ^ 62 3) Blister tape, 330-mm reel, ordering code ** ^ 72 Please read Cautions and warnings and Important notes at the end of this document. 19 10/06 Advanced series Multilayer ceramic capacitors Advanced series; C0G Typical characteristics for C0G 1) Capacitance change DC/C25 versus temperature T (tolerance range ) C C 25 Capacitance change DC/C0 versus superimposed DC voltage V KKE0107-F 1.0 % KKE0458-8 0.5 0.6 C % C0 0.3 0.4 0.2 0.2 0.1 0 0 _ 0.2 _ 0.1 _ 0.4 _ 0.2 _ 0.6 _ 0.3 _ 0.8 _ 0.4 _ 1.0 _ 55 _ 40 _ 20 0 20 40 60 80 KKE0124-5 10 5 Z 10 4 10 3 10 2 10 1 0 40 80 120 160 V 200 V Dissipation factor tan d versus temperature T Impedance |Z| versus frequency f _ 0.5 C 120 T 1 pF 10 _2 KKE0118-V tan 10 pF 10 _3 100 pF 1 nF 10 _4 10 0 10 10 _1 _2 10 0 10 1 10 2 10 MHz 10 3 f _5 _ 60 _ 40 _ 20 0 20 40 60 80 100 C 140 T 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 20 10/06 Multilayer ceramic capacitors Advanced series; C0G Advanced series Typical characteristics for C0G 1) Capacitance change DC/C1 versus time t Insulation resistance Rins versus temperature T KKE0129-B 10 8 M KKE0100-S 5 C % C1 0 R ins 10 6 _5 10 5 _ 10 10 4 _ 15 10 3 10 2 0 20 40 60 80 100 _ 20 10 0 C 140 T 10 1 10 2 h 10 3 t 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 21 10/06 Advanced series Multilayer ceramic capacitors Advanced series; X7R Typical characteristics for X7R 1) Capacitance change DC/C25 versus temperature T for NME C C 25 15 % Capacitance change DC/C25 versus temperature T for BME KKE0417-6 C C 25 5 15 % 5 0 0 _5 _5 _ 10 _ 15 _ 20 _ 25 _ 30 _ 35 _ 40 _ 45 _ 50 _ 60 _ 40 _ 20 0 20 40 60 80 100 120 C 160 KKE0409-F _ 10 _ 15 _ 20 _ 25 _ 30 _ 35 _ 40 _ 45 _ 50 _ 60 _ 40 _ 20 0 20 40 60 80 100 120 C 160 T T Capacitance change DC/C25 versus temperature T for HighCV C C 25 15 % KKE0410-I 5 0 _5 _ 10 _ 15 _ 20 _ 25 _ 30 _ 35 _ 40 _ 45 _ 50 _ 60 _ 40 _ 20 0 20 40 60 80 100 120 C 160 T 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 22 10/06 Multilayer ceramic capacitors Advanced series Advanced series; X7R Typical characteristics for X7R 1) Capacitance change DC/C0 versus superimposed DC voltage V for NME Capacitance change DC/C0 versus superimposed DC voltage V for BME KKE0415-N 10 % C C0 0 10 nF/100 V/size 1206 _ 10 _ 10 _ 20 _ 20 _ 30 _ 30 _ 40 _ 40 _ 50 _ 50 _ 60 _ 60 _ 70 0 20 40 60 80 KKE0402-S 10 % C C0 0 100 nF/50 V/size 0805 _ 70 V 100 V 0 5 10 15 20 25 30 35 40 45 50 V V Capacitance change DC/C0 versus superimposed DC voltage V for HighCV C C0 KKE0413-8 20 % 0 _ 10 _ 20 1 F/25 V/size 0805 _ 30 _ 40 _ 50 _ 60 _ 70 _ 80 _ 90 _ 100 0 5 10 15 20 25 V 30 V 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 23 10/06 Multilayer ceramic capacitors Advanced series Advanced series; X7R Typical characteristics for X7R 1) Impedance |Z| versus frequency f for NME Impedance |Z| versus frequency f for BME KKE0405-G 10 2 KKE0416-X 10 1 10 nF/100 V/size 1206 Z , ESR 100 nF/50 V/size 0805 Z , ESR 10 0 10 0 10 10 10 10 _1 _1 _2 10 Z ESR Z ESR _3 10 0 _2 10 1 10 2 10 10 3 MHz 10 4 f _3 10 0 10 1 10 2 10 3 MHz 10 4 f Impedance |Z| versus frequency f for HighCV KKE0399-4 10 4 1 F/25 V/size 0805 Z , ESR 10 2 10 1 10 0 10 10 10 _1 _2 _3 10 Z ESR _4 10 _3 10 _2 10 _1 10 0 10 1 10 2 MHz 10 4 f 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 24 10/06 Multilayer ceramic capacitors Advanced series Advanced series; X7R Typical characteristics for X7R 1) Dissipation factor tan d versus temperature T for NME/BME 10 _1 Dissipation factor tan d versus temperature T for HighCV KKE0430-X _1 KKE0431-6 tan tan 10 10 _2 10 _ _ 10 _3 _ _ 60 40 20 0 20 40 60 80 100 120 C 160 T 10 _3 _ _ 60 40 20 0 20 40 60 80 100 120 C 160 T Insulation resistance Rins versus temperature T for NME/BME Insulation resistance Rins versus temperature T for HighCV KKE0428-L 10 8 _2 KKE0429-U 10 4 M M R ins R ins 1 F/25 V/size 0805 10 3 10 6 10 2 10 5 10 4 10 1 10 3 10 2 0 20 40 60 80 100 120 10 0 C 160 T 0 20 40 60 80 100 120 C 160 T 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 25 10/06 Multilayer ceramic capacitors Advanced series Advanced series; X7R Typical characteristics for X7R 1) Capacitance change DC/C1 versus time t for NME/BME C C1 Capacitance change DC/C1 versus time t for HighCV KKE0394-X 10 % C C1 5 5 0 0 _5 _5 _ 10 _ 10 _ 15 _ 15 _ 20 10 0 10 1 10 2 10 3 10 4 _ 20 h 10 5 KKE0397-M 10 % 10 0 t 10 1 10 2 10 3 10 4 h 10 5 t 1) For more detailed information on frequency behavior and characteristics see www.epcos.com/mlcc_impedance. Please read Cautions and warnings and Important notes at the end of this document. 26 10/06 Multilayer ceramic capacitors Cautions and warnings Notes on the selection of ceramic capacitors In the selection of ceramic capacitors, the following criteria must be considered: 1. Depending on the application, ceramic capacitors used to meet high quality requirements should at least satisfy the specifications to AEC-Q200. They must meet quality requirements going beyond this level in terms of ruggedness (e.g. mechanical, thermal or electrical) in the case of critical circuit configurations and applications (e.g. in safety-relevant applications such as ABS and airbag equipment or durable industrial goods). 2. At the connection to the battery or power supply (e.g. clamp 15 or 30 in the automobile) and at positions with stranding potential, to reduce the probability of short circuits following a fracture, two ceramic capacitors must be connected in series and/or a ceramic capacitor with integrated series circuit should be used. The MLSC from EPCOS contains such a series circuit in a single component. 3. Ceramic capacitors with the temperature characteristics Z5U and Y5V do not satisfy the requirements to AEC-Q200 and are mechanically and electrically less rugged than C0G or X7R/X8R ceramic capacitors. In applications that must satisfy high quality requirements, therefore, these capacitors should not be used as discrete components (see the chapter "Effects on mechanical, thermal and electrical stress", point 1.4). 4. For ESD protection, preference should be given to the use of multilayer varistors (MLV) (see the chapter "Effects on mechanical, thermal and electrical stress", point 1.4). 5. An application-specific derating or continuous operating voltage must be considered in order to cushion (unexpected) additional stresses (see the chapter "Reliability"). The following should be considered in circuit board design 1. If technically feasible in the application, preference should be given to components having an optimal geometrical design. 2. At least FR4 circuit board material should be used. 3. Geometrically optimal circuit boards should be used, ideally those that cannot be deformed. 4. Ceramic capacitors must always be placed a sufficient minimum distance from the edge of the circuit board. High bending forces may be exerted there when the panels are separated and during further processing of the board (such as when incorporating it into a housing). 5. Ceramic capacitors should always be placed parallel to the possible bending axis of the circuit board. 6. No screw connections should be used to fix the board or to connect several boards. Components should not be placed near screw holes. If screw connections are unavoidable, they must be cushioned (for instance by rubber pads). 27 10/06 Multilayer ceramic capacitors Cautions and warnings The following should be considered in the placement process 1. Ensure correct positioning of the ceramic capacitor on the solder pad. 2. Caution when using casting, injection-molded and molding compounds and cleaning agents, as these may damage the capacitor. 3. Support the circuit board and reduce the placement forces. 4. A board should not be straightened (manually) if it has been distorted by soldering. 5. Separate panels with a peripheral saw, or better with a milling head (no dicing or breaking). 6. Caution in the subsequent placement of heavy or leaded components (e.g. transformers or snap-in components): danger of bending and fracture. 7. When testing, transporting, packing or incorporating the board, avoid any deformation of the board not to damage the components. 8. Avoid the use of excessive force when plugging a connector into a device soldered onto the board. 9. Ceramic capacitors must be soldered only by the mode (reflow or wave soldering) permissible for them (see the chapter "Soldering directions"). 10. When soldering the most gentle solder profile feasible should be selected (heating time, peak temperature, cooling time) in order to avoid thermal stresses and damage. 11. Ensure the correct solder meniscus height and solder quantity. 12. Ensure correct dosing of the cement quantity. 13. Ceramic capacitors with an AgPd external termination are not suited for the lead-free solder process: they were developed only for conductive adhesion technology. This listing does not claim to be complete, but merely reflects the experience of EPCOS AG. 28 10/06 Multilayer ceramic capacitors Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 29 10/06