SP75 Series 75W, 90-264Vac Input, Single Output, Open-frame Power Supply Features * * * * * * * * 5Vdc to 56Vdc in a 1Vdc increment Remote Sense Low Profile Input voltage range: 90-264Vac UL, cUL, CB & DEMKO (EN60959) Safety Approval CE Compliant 2 X 4 form factor Low cost unit Model List*(See part number scheme for model number details) *Product images are for illustrative purposes only and may vary from actual design. SP75-10500 Input Voltage Range 90 -264Vac SP75-11200 90 -264Vac 75W 12V 0 6.25A 75% UL/cUL/CB/DEMKO SP75-11400 90 -264Vac 90 -264Vac 90 -264Vac 90 -264Vac 90 -264Vac 90 -264Vac 75W 75W 75W 75W 75W 75W 14V 15V 24V 38V 48V 56V 0 0 0 0 0 0 5.35 5A 3.12A 1.97A 1.56A 1.34A 82% 84% 85% 85% 85% 85% UL/cUL/CB/DEMKO Model Number SP75-11500 SP75-12400 SP75-13800 SP75-14800 SP75-15600 5V Output Current Min. 0 Output Current Max. 8A Output Power Output Voltage 40W Efficiency Certification 68% UL/cUL/CB/DEMKO UL/cUL/CB/DEMKO UL/cUL/CB/DEMKO UL/cUL/CB/DEMKO UL/cUL/CB/DEMKO UL/cUL/CB/DEMKO Technical Data Ripple & Noise (max.) (2) Voltage Adjustment Range Voltage Tolerance Line Regulation Load Regulation Setup, Rise Time Hold Time Voltage Range Frequency Range AC Current (max.) Inrush Current (max.) Short Circuit Protection Over Load Over Voltage 1% Pk to Pk 5% 5% 1% 5% All output shall reach their steady state values within 3 Sec. of turn on 20mS min. 90V ~ 264VAC 47Hz / 63Hz 2.0A @ 115VAC Will not exceed 30A / 115VAC, Cold Start, 25C Protection type : Hiccup mode, recovers automatically after fault condition is removed >150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 115% ~ 135% rated output voltage Protection type : Hiccup mode, Recycle AC to restart Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 1/3 SP75 Series 75W, 90-264Vac Input, Single Output, Open-frame Power Supply Technical Data(cont.) Temperature Range Operational Temperature Range Storage Working Humidity Operational Working Humidity Storage Temp. Coefficient Vibration MTBF Dimension (L*W*H) Weight 0C ~ 50C - 40C ~ +80C 20 ~ 95% RH non-condensing 5 ~ 95% R.H 0.01%/C typical on all outputs 3G, 10-25Hz, 15min. Per cycle for each axis (X, Y, Z) 150,000 hrs @ 25C based on MIL-STD-217F 101.64*50.83*30.5 (mm) - 4.0*2.0*1.2 (inch) 0.18kg - 0.40Lb Safety and EMC Safety Standards Withstand Voltage EMI Conduction & Radiation EMS Immunity UL (60950-1:2001) , CUL, DEMKO and CB I/P - O/P: 3KVAC (4242 DC), 10mA for 1 minute EN55022 , FCC Class B EN61204, EN61000-3-2, EN61000-3-3 Mechanical Diagram Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 2/3 SP75 Series 75W, 90-264Vac Input, Single Output, Open-frame Power Supply Pin Assignment/Shipping Specifications PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 CONNECTOR PIN ASSIGNMENT P1 Input P2 Output Line +V NC +V Neutral + S (remote Sense) -S -V -V Molex 1063-4037 Molex 09-65-2065 Shipping Specifications Series SP75 Units per carton 72.0 Carton weight 13.27kgs/29.26lbs Carton Dimensions 16.0/16.0/10.0in (W/L/H) Carton Dimensions 406.4/406.4/254mm (W/L/H) NOTES: 1. This family is from 5V to 56V in 1VDC increment, please consult with Autec Sales for the right model # for your application. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. Specification subject to change without notice. Part Number Scheme SP 75-1 XXXX XXXX=Rated Voltage Ex.) 0500=5V 5600=56V SP=Open-frame series 75=Output power Watts 1=Single output *Product images are for illustrative purposes only and may vary from actual design. *Specifications are subject to change without notice. Autec is not responsible for issues arising from errors or omissions. Technical Sales / Customer Service: +1-818-338-7788 * Email: sales@autec.com 31328 Via Colinas Suite 102 * Westlake Village, CA 91362 USA * www.autec.com 3/3