Chip Resistors FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH VOLTAGE li KAMAYA OHM Eiltl RVC @Features 1. Higher Limiting Element Voltage compared with RMC series. 2. Stability Class : 5% eDimensions 9 EI |. el el Co Rated resistance is marked with 3-digit (E24 series) or 4-digit (E96 series) on the over coating. RVC16 4-digit marking is not available. Unit : mm Style | Metric Inch L Ww H ie d *Unit weight/pc. RVC16 1608 0603 1.640.1 0.8 the 0.45+0.10 0.3 +0.1 0.3 +0.1 2mg RVC20 2012 o8sos 2.0+0.1 1.25+0.10 0.55+0.10 0.4+0.2 0.4 +0.2 5mg RVC32 3216 1206 3.24+0.15 1.6 +0.15 0.55+0.10 0.5 +0.25 0.5 +0.25 9mg RVC50 5025 2010 5.0+0.15 2.5 +0.15 0.55+0.15 0.6 +0.2 0.6 +0.2 25mg RVC63 6332 2512 6.3+0.15 3.2 +0.15 0.55+0.15 0.6 +0.2 0.6 +0.2 40mg Values for reference @Part Number Description Example Style | Rvc | [| 32 | | | K | | 475 | | F | | TP | | | | | Product Type | Size Rated Resistance Tolerance on Rated Resistance * Packaging & Standard Qty. (Min.) Code) Metric) Inch E24 Series . F + 1% All Styles 46 | 1608 10603 e.g. :475=4.7M ohm 3-Digit G + 2% B | Bulk (Loose Package) | 1,000pcs. y 20 | 2012 |0805 E96 Series J + 5% RVC16 32 |3216| 1206 e.g. :7154=7.15M ohm|*Digit]! [KK | 440% TP | Paper Tape 5,000pcs. RVC20 50 | 5025 | 2010 : : RVC50 63 |6332 |2512 Temperature Coefficient of Resistance TE |Embossed T. 4,000pcs. r= Standard mbossed 'ape Pcs. | RVCB3 K_| +100x107/C Refer to Tape and Packaging information on pages 38 and 39. 10Ns KAMAYA OHM Se FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH VOLTAGE RVC @Ratings Size | Rated Dissipation | Limiting Element | Temperature Coefficient | Combinations of Reted Resistance Range and Tolerance on Rated Resistance | Preferred Number] Isolation | Category Temperature Style || Metric at 70C Voltage of Resistance Series for | Voltage Range (Inch) W v Code) 104C F(1%) , G(+2%) | J(=5%) , K(+10%) Resistors Vv C 1608 K +100 4700 ~ 10MQO RVC16 0.1 200 100 (0603) - +200 470 ~ 4640 F(+1%) 2012 K +100 1000~10MQ | 1000~51MQ G(+29 RVC20 0.125 300 (+2%) (0805) - +200 470 ~ 97.60 . 3216 K +100 1000~10MQ | 1000~51MQ Eo6series RVC32 0.25 400 i | (1206) | +200 47Q ~ 97.60 E2dseries -55~+125 5025 K +100 4700~20MQ0 | 4700~51MQ 500 RVC50 0.5 500 | (2010) | | +200 470 ~ 4640 J(+ 5%) 6339 K +100 5600~20MQ | 600~51MO K(+10%) RVC63 (2512) 1.0 800 - +200 1000 ~ 5490 E24series | +500~-200 470 ~ 97.60 Note1. Rated Voltage =,/(Rated Dissipation)x(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value. @Derating Curve @Climatic Category The derated values of dissipation for temperatures in excess of 55/125/56 70C shall be indicated by the following Curve. Lower Category Temperature 55C 100 Upper Category Temperature +125C = Duration of the Damp heat, Steady-State Test 56 days 5 q z 3 = Area of recommended operation 8 0 55 0 70 125 Ambient Temperature (C) @Performance Characteristics sis c 5201-1 : 1998 Description Requirements Test Methods Volta f No breakdown or flashover Clause4,7 RVC16 100Va.c.,60s olrage proo Re1G ohm RVC20~RVC63 500Va.c.,60s with temperature See Ratings Table Clause 4.8 Measuring temperature +20C/-55CI+20C/+125C/4+20C ARs+(1%+0.05 ohm) Clause 4.13 The applied voltage shall be 2.5 times of the rated voltage or twice Overload we : . a : - No visible damage, legible marking of the limiting element voltage, whichever is the less severe, 2s. Solderability In accordance with Clause 4.17.4.5 Clause 4.17 235C, 2s Resistance to Clause 4.18 After immersion into the flux, the immersion into solder 0, 4 soldering heat ARs#(1%+0.05 ohm) shall be carried out in Solder bath at 260C for 5s. torperatare. of ARs+(1%+0.05 ohm) No visible damage Clause 4.19 5 cycles between -55C and +125C. o. a Clause 4.23 Dry/Damp heat(12+12h cycle), first cycle./ Climatic sequence ARs+(5%+0.1 ohm) No visible damage Cold/Damp heat(12+12h cycle), remaining cycle. /D.C.Load. Damp test, steady state | ARs+(5%+0.1 ohm) No visible damage, legible marking Clause 4.24 40C, 959R.H., 56 days, test a) and b) of Clause 4.24.2.1 Endurance at 70C ARs+(5%+0.1 ohm) No visible damage Clause 4.25.1 Rated voltage, 1.5h"ON", 0.5h"OFF", 70C, 1,000h. category temperatire | ARs+(5%+0.1 ohm) No visible damage Clause 425 125C, no-load, 1,000h. Adhesion No visible damage Clause 4.32 SN, 10s Bend strength of the Clause 4.33 RVC16~RVC32 Amount of bend : 3mm face plating ARs+(1%+0.05 ohm) RVC50,63 Amount of bend: 1mm 11 Chip Resistors