ES2G 2.0A SURFACE MOUNT SUPER-FAST RECTIFIER NEW PRODUCT Features * * * * * Glass Passivated Die Construction Super-Fast Recovery Time For High Efficiency Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 50A Peak Ideally Suited for Automated Assembly SMB B A C Mechanical Data * * * * * * * Case: Molded Plastic Plastic Material: UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solder Plated Terminal Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Weight: 0.093 grams (approx.) Marking: Type Number & Date Code: See Below D J G E H Maximum Ratings and Electrical Characteristics Dim Min Max A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol ES2G Unit VRRM VRWM VR 400 V VR(RMS) 280 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) IFSM 50 A Forward Voltage @ IF = 2.0A VFM 1.25 V @ TA = 25C @ TA = 125C IRM 5.0 350 mA Reverse Recovery Time (Note 3) trr 35 ns Typical Capacitance (Note 2) CT 25 pF RqJT 20 C/W Tj, TSTG -55 to +150 C Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage @ TT = 110C Typical Thermal Resistance, Junction to Terminal (Note 1) Operating and Storage Temperature Range Ordering Information (Note 4) Notes: 1. 2. 3. 4. Device Packaging Shipping ES2G-13 SMB 5000/Tape & Reel Unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information YWW ES2G DS30212 Rev. 3 - 2 ES2G = Product type marking code = Manufacturers' code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 1 of 2 www.diodes.com ES2G a Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 2.0 1.6 1.2 0.8 0.4 0 25 75 50 100 125 150 175 10 Tj = 25C Pulse width = 300ms 1.0 0.1 0.01 0 TT, TERMINAL TEMPERATURE (C) Fig. 1 Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) NEW PRODUCT 0.75 0.4 0.8 1.2 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 60 Single Half-Sine-Wave (JEDEC Method) 50 Tj = 125C 100 40 10 30 20 Tj = 25C 1.0 10 0.1 0 1 10 0 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr +0.5A 50W NI (Non-inductive) 10W NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0W NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MW, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50W. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS30212 Rev. 3 - 2 2 of 2 www.diodes.com ES2G