MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays Features Description The MV5X164 series is a 10 segment bargraph display with separate anodes and cathodes for each light segment. The pagckages are end-stackable. Large segment, closely spaced End-stackable Fast switching--excellent for multiplexing Low power consumption Directly compatible with IC's Wide viewing angle Standard .3-inch DIP lead spacing Categorized for Luminous Intensity (See Note 1) Package Dimensions .070" (1.78mm) .002" .100" (2.54mm) .010" .200" (5.08mm) .003" .400" MAX (10.16mm) .011" (0.28mm) .003" 1.005" MAX (25.527mm) CHAM TO INDICATE PIN #1 DATE CODE LIGHT INTENSITY CATEGORY PART NO. MV5X164 .160" (4.06mm) .015" XYY .315" (8.00mm) .005" Z .010" (0.25mm) .002" .050" (1.27mm) .020" TYP (0.51mm) .100" (2.54mm) .010" .300" (7.62mm) .010" NOTE: Tolerances 0.10" unless otherwise specified. (c)2005 Fairchild Semiconductor Corporation MV53164, MV54164, MV57164 Rev. 1.0.0 1 www.fairchildsemi.com MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays January 2005 Parameter MV53164 Power dissipation at 25C ambient MV54164 MV57164 750 mW 750 mW 750 mW -14.3 mW/C -14.3 mW/C -14.3 mW/C -40C to +85C -40C to +85C -40C to +85C 200 mA 25 mA 300 mA 30 mA 300 mA 30 mA Reverse voltage Per segment 6.0 V 6.0 V 6.0 V Soldering time at 260C (See Notes 3 and 5) 5 sec. 5 sec. 5 sec. MV53164 MV54164 MV57164 Thermal resistance junction to free air JA 160C/W 160C/W 160C/W Wavelength temperature coefficient (case temp.) 1.0 A/C 1.0 A/C 1.0 A/C -1.5 mV/C -1.4 mV/C -2.0 mV/C Derate linearly from 50C Storage and operating temperature Continuous forward current Total Per segment Typical Thermal Characteristics Parameter Forward voltage temperature coefficient Electro-Optical Characteristics (25C Free Air Temperature Unless Otherwise Specified) Parameter Test Conditions Min. Forward voltage MV53164, MV57164/MV54164 IF = 10 mA Luminous Intensity (unit average) (See Note 1) IF = 10 mA 510 1800 cd Pulsed Luminous Intensity (MV54164) IF = 60 mA, peak; 1:6 DF 710 2500 cd 585 562 630 nm nm nm 40/30 nm Peak emission wavelength MV53164 MV54164 MV57164 Spectral line half width MV53164, MV57164/MV54164 Typ. Max. 2.0/2.2 2.5/3.0 Units V Dynamic resistance Segment MV53164, MV57154/MV54164 IF = 20 mA 26/12 Capacitance MV53164, MV57164/MV54164 V = 0, f = 1 MHz 35/40 pF 500 ns Switching time IF = 10 mA Reverse voltage IR = 100 A 2 MV53164, MV54164, MV57164 Rev. 1.0.0 6.0 www.fairchildsemi.com MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays Absolute Maximum Ratings TYPICAL DRIVE CIRCUIT V+ RHI 6 REF OUT 7 RB RVS 1.2V REF ADJ 8 BAR OR 9 SINGLE LED CONTROL V+ CC 5 11 10 11 12 9 12 13 8 13 14 7 14 15 6 15 16 5 16 17 4 17 18 3 18 19 2 1 20 1 MSA 3 SIGNAL IN 10 - + - + B ILED RLO 4 2 v LM3914 RVS: MSA: B: RB: MV54164 REFERENCE VOLTAGE SOURCE MODE SELECT AMPLIFIER BUFFER LED BRIGHTNESS CONTROL Pin Connections Pin No. Electrical Connections Pin No. Electrical Connections Pin No. Electrical Connections Pin No. Electrical Connections 1 Bar 1 Anode 6 Bar 6 Anode 11 Bar 10 Cathode 16 Bar 5 Cathode 2 Bar 2 Anode 7 Bar 7 Anode 12 Bar 9 Cathode 17 Bar 4 Cathode 3 Bar 3 Anode 8 Bar 8 Anode 13 Bar 8 Cathode 18 Bar 3 Cathode 4 Bar 4 Anode 9 Bar 9 Anode 14 Bar 7 Cathode 19 Bar 2 Cathode 5 Bar 5 Anode 10 Bar 10 Anode 15 Bar 6 Cathode 20 Bar 1 Cathode 3 MV53164, MV54164, MV57164 Rev. 1.0.0 www.fairchildsemi.com MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays Typical Drive Circuit 100 4.0 FORWARD CURRENT (IF) - mA RELATIVE LUMINOUS INTENSITY MV53164 90 80 70 MV57164 60 50 MV54164 40 30 20 NORMALIZED AT IF = 10 mA 3.0 GREEN YELLOW & HER 2.0 1.0 10 0 .4 0 .8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FORWARD VOLTAGE (VF) - VOLTS 10 5 15 20 25 30 DC FORWARD CURRENT -- IF (mA) Fig. 1. Forward Current vs. Forward Voltage Fig. 2. Relative Luminous Intensity vs. DC Forward Current (Both LED Chips ON) 1000 800 2 500 200 100 80 50 MV57164 FREQ = 200 pps RELATIVE INTENSITY PEAK IF = mA FREQUENCY = 200 pps MV5X164 SERIES 1.5 MV53164 20 1 10 10 1 3 5 20 10 50 100 20 DUTY CYCLE = % DC DUTY CYCLE - % IF per seg. 10 mA AVERAGE Fig. 4. Luminous Intensity vs. Duty Cycle Fig. 3. Max Peak Current vs. Duty Cycle 1000 800 600 4.0 400 RELATIVE EFFICIENCY IL at drive/IL at 10 mA DC MAXIMUM PEAK CURRENT (mA) 40 PERCENT DUTY - % MV54164 200 10 100 80 60 3. 0 KH z 1. 0 KH z 30 0 KH z Hz 10 0 Hz 40 3.0 IF (AVG) = 20 mA 10 mA 5 mA 2.5 mA 2.0 1.0 20 MV54164 10 10 0.0 100 1000 2.0 10,000 10 20 50 DC % DUTY CYCLE PULSE DURATION |S| Fig. 5. Maximum Peak Current vs. Pulse Duration Fig. 6. Relative Efficiency vs. Duty Cycle 4 MV53164, MV54164, MV57164 Rev. 1.0.0 5.0 www.fairchildsemi.com MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays Typical Curves MV53164, MV54164, MV57164 (Per Segment) (25C Free Air Temperature) For optimum ON and OFF contrast, one of the following filters or equivalents may be used over the lamp: MV53164 Panelgraphic Yellow 25 or Amber 23 Homalite 190--1720 or 100--1726 MV54164 Panelgraphic Green 48 Homalite 100--1440 Green MV57164 Panelgraphic Red 60 Homalite 100--1605 In situations of high ambient light, a neutral density filter can be used to achieve greater contrast: Panelgraphic Grey 10 Panelgraphic Grey 10 Homalite 100--1266 Grey Notes 1. The average Luminous Intensity is obtained by summing the Luminous Intensity of each segment and dividing by the total number of segments. The standard of measurement is the Photo Research Corp. "Spectra" Microcandela Meter (Model IV-D) corrected for wavelength. Intensity will not vary more than 33.3% between all segments within a unit. 2. Leads immersed to 1/16 inch (1.6 mm) from the body of the device. Maximum unit surface temperature is 140C. 3. All units are categorized for Luminous Intensity. The Intensity category is marked on each part as a suffix letter to the part number. 4. For flux removal, Freon TF, Freon TE, isoproponal or water may be used to their boiling points. 5 MV53164, MV54164, MV57164 Rev. 1.0.0 www.fairchildsemi.com MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays Filter Recommendations The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST ActiveArrayTM FASTrTM BottomlessTM FPSTM CoolFETTM FRFETTM CROSSVOLTTM GlobalOptoisolatorTM DOMETM GTOTM EcoSPARKTM HiSeCTM E2CMOSTM I2CTM EnSignaTM i-LoTM FACTTM ImpliedDisconnectTM FACT Quiet SeriesTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM Across the board. Around the world.TM OPTOLOGIC OPTOPLANARTM The Power Franchise PACMANTM Programmable Active DroopTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM SILENT SWITCHER SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET UniFETTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I15 6 MV53164, MV54164, MV57164 Rev. 1.0.0 www.fairchildsemi.com MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays TRADEMARKS