S-75V00ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT NAND GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 1
The S-75V00ANC is a single 2-Input NAND Gate fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL
IC’s.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 3.7 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
OUT Y
1
IN B
IN A
GND
VCC
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5V1 Product code
Logic Diagram
True values
A B Y
L L H
L H H
H L H
IN B
IN A OUT Y
H H L
MINI LOGIC SERIES 2 INPUT NAND GATE
S-75V00ANC Rev.3.0_00
Seiko Instruments Inc.
2
Product Name Structure
S-75V00A NC − 5V1 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT NAND GATE
Rev.3.0_00 S-75V00ANC
Seiko Instruments Inc. 3
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
0 to 100 (VCC = 3.3±0.3 V) ns
Input rise / fall time tR, tF 0 to 20 (VCC = 5±0.5 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.5 ⎯ ⎯ 1.5 ⎯ V
“H” level VIH ⎯ 3 to 5.5 VCC×0.7 ⎯ ⎯ V
CC×0.7 ⎯ V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5 V
Input
voltage “L” level VIL ⎯ 3 to 5.5 ⎯ ⎯ V
CC×0.3 ⎯ V
CC×0.3 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH VIN = VIL
or VIH
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT NAND GATE
S-75V00ANC Rev.3.0_00
Seiko Instruments Inc.
4
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 5.5 7.9 1.0 9.5 ns
3.3±0.3 50 ⎯ 10.0 14.0 1.0 15.0 ns
15 ⎯ 3.7 5.5 1.0 6.5 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 6.1 8.5 1.0 9.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 14 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
VOL
tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75V02ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT NOR GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 5
The S-75V02ANC is a single 2-input NOR gate fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL
IC’s.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 3.6 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
IN B
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5V3
Product code
Logic Diagram
True values
A B Y
L L H
L H L
H L L
IN B
IN A OUT Y
H H L
MINI LOGIC SERIES 2 INPUT NOR GATE
S-75V02ANC Rev.3.0_00
Seiko Instruments Inc.
6
Product Name Structure
S-75V02A NC − 5V3 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT NOR GATE
Rev.3.0_00 S-75V02ANC
Seiko Instruments Inc. 7
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
0 to 100 (VCC = 3.3±0.3 V) ns
Input rise / fall time tR, tF 0 to 20 (VCC = 5±0.5 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.5 ⎯ ⎯ 1.5 ⎯ V
“H” level VIH ⎯ 3 to 5.5 VCC×0.7 ⎯ ⎯ V
CC×0.7 ⎯ V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5 V
Input
voltage “L” level VIL ⎯ 3 to 5.5 ⎯ ⎯ V
CC×0.3 ⎯ V
CC×0.3 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH V
IN = VIL
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL VIN = VIH
or VIL
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT NOR GATE
S-75V02ANC Rev.3.0_00
Seiko Instruments Inc.
8
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 5.6 7.9 1.0 9.5 ns
3.3±0.3 50 ⎯ 10.0 14.0 1.0 15.0 ns
15 ⎯ 3.6 5.5 1.0 6.5 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 5.7 8.0 1.0 9.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 15 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75V04ANC
www.sii-ic.com
MINI LOGIC SERIES
INVERTER
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 9
The S-75V04ANC is a INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides the
inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s.
The special purpose unbuffered circuit design is suitable for a wide variety of linear circuits.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 3.8 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1 NC
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5V5
Product code
Logic Diagram
True values
A Y
L H
IN A OUT Y
H L
MINI LOGIC SERIES INVERTER
S-75V04ANC Rev.3.0_00
Seiko Instruments Inc.
10
Product Name Structure
S-75V04A NC − 5V5 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES INVERTER
Rev.3.0_00 S-75V04ANC
Seiko Instruments Inc. 11
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
0 to 100 (VCC = 3.3±0.3 V) ns
Input rise / fall time tR, tF 0 to 20 (VCC = 5±0.5 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.5 ⎯ ⎯ 1.5 ⎯ V
“H” level VIH ⎯ 3 to 5.5 VCC×0.7 ⎯ ⎯ V
CC×0.7 ⎯ V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5 V
Input
voltage “L” level VIL ⎯ 3 to 5.5 ⎯ ⎯ V
CC×0.3 ⎯ V
CC×0.3 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH V
IN = VIL
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES INVERTER
S-75V04ANC Rev.3.0_00
Seiko Instruments Inc.
12
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 5.0 7.1 1.0 8.5 ns
3.3±0.3 50 ⎯ 9.6 13.5 1.0 14.5 ns
15 ⎯ 3.8 5.5 1.0 6.5 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 5.7 8.0 1.0 9.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 13 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75VU04ANC
www.sii-ic.com
MINI LOGIC SERIES
INVERTER (unbuffer)
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 13
The S-75VU04ANC is a inverter fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent
benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s.
The special purpose unbuffered circuit design is suitable for a wide variety of linear circuits.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 3.5 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 10% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1 NC
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5V6
Product code
Logic Diagram
True values
A Y
L H
IN A OUT Y
H L
MINI LOGIC SERIES INVERTER (unbuffer)
S-75VU04ANC Rev.3.0_00
Seiko Instruments Inc.
14
Product Name Structure
S-75VU04A NC − 5V6 TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES INVERTER (unbuffer)
Rev.3.0_00 S-75VU04ANC
Seiko Instruments Inc. 15
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.7 ⎯ ⎯ 1.7 ⎯ V
“H” level VIH V
OUT = VOL 3 to 5.5 VCC×0.8 ⎯ ⎯ V
CC×0.8 ⎯ V
2.0 ⎯ ⎯ 0.3 ⎯ 0.3 V
Input
voltage “L” level VIL V
OUT = VOH 3 to 5.5 ⎯ ⎯ V
CC×0.2 ⎯ V
CC×0.2 V
2.0 1.8 2.0 ⎯ 1.8 ⎯ V
3.0 2.7 3.0 ⎯ 2.7 ⎯ V
VIN = VIL I
OH = −50 μA 4.5 4.0 4.5 ⎯ 4.0 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH
VIN = GND IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.2 ⎯ 0.2 V
3.0 ⎯ 0 0.3 ⎯ 0.3 V
VIN = VIH I
OL = 50 μA 4.5 ⎯ 0 0.5 ⎯ 0.5 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL
VIN = VCC IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES INVERTER (unbuffer)
S-75VU04ANC Rev.3.0_00
Seiko Instruments Inc.
16
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 5.0 8.9 1.0 10.5 ns
3.3±0.3 50 ⎯ 8.9 12.5 1.0 13.5 ns
15 ⎯ 3.5 5.5 1.0 6.5 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 5.4 7.5 1.0 8.0 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 6 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75V08ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT AND GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 17
The S-75V08ANC is a Single 2-Input AND Gate fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL
IC’s.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 4.3 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
IN B
GND
VCC
OUT Y
2
3 4
5
(Top view)
1
IN A
32
1
4
(Top view)
5
5V2
Product code
Logic Diagram
True values
A B Y
L L L
L H L
H L L
IN B
IN A OUT Y
H H H
MINI LOGIC SERIES 2 INPUT AND GATE
S-75V08ANC Rev.3.0_00
Seiko Instruments Inc.
18
Product Name Structure
S-75V08A NC − 5V2 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT AND GATE
Rev.3.0_00 S-75V08ANC
Seiko Instruments Inc. 19
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
0 to 100 (VCC = 3.3±0.3 V) ns
Input rise / fall time tR, tF 0 to 20 (VCC = 5±0.5 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.5 ⎯ ⎯ 1.5 ⎯ V
“H” level VIH ⎯ 3 to 5.5 VCC×0.7 ⎯ ⎯ V
CC×0.7 ⎯ V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5 V
Input
voltage “L” level VIL ⎯ 3 to 5.5 ⎯ ⎯ V
CC×0.3 ⎯ V
CC×0.3 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH V
IN = VIH
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL VIN = VIH
or VIL
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT AND GATE
S-75V08ANC Rev.3.0_00
Seiko Instruments Inc.
20
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 6.2 8.8 1.0 10.5 ns
3.3±0.3 50 ⎯ 9.6 13.5 1.0 14.5 ns
15 ⎯ 4.3 5.9 1.0 7.0 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 5.7 7.9 1.0 9.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 14 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75V14ANC
www.sii-ic.com
MINI LOGIC SERIES
SCHMITT INVERTER
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 21
The S-75V14ANC is a SCHMITT INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides
the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 5.5 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1 NC
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5VA
Product code
Logic Diagram
True values
A Y
L H
IN A OUT Y
H L
MINI LOGIC SERIES SCHMITT INVERTER
S-75V14ANC Rev.3.0_00
Seiko Instruments Inc.
22
Product Name Structure
S-75V14A NC − 5VA − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES SCHMITT INVERTER
Rev.3.0_00 S-75V14ANC
Seiko Instruments Inc. 23
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
3.0 ⎯ ⎯ 2.20 ⎯ 2.20 V
4.5 ⎯ ⎯ 3.15 ⎯ 3.15 V
“H” level VP ⎯ 5.5 ⎯ ⎯ 3.85 ⎯ 3.85 V
3.0 0.90 ⎯ ⎯ 0.90 ⎯ V
4.5 1.35 ⎯ ⎯ 1.35 ⎯ V
Threshold
voltage “L” level VN ⎯ 5.5 1.65 ⎯ ⎯ 1.65 ⎯ V
3.0 0.30 ⎯ 1.20 0.30 1.20 V
4.5 0.40 ⎯ 1.40 0.40 1.40 V
Hysteresis voltage VH ⎯ 5.5 0.5 ⎯ 1.60 0.5 1.60 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH V
IN = VIL
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES SCHMITT INVERTER
S-75V14ANC Rev.3.0_00
Seiko Instruments Inc.
24
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 8.3 12.8 1.0 15.0 ns
3.3±0.3 50 ⎯ 10.8 16.3 1.0 18.5 ns
15 ⎯ 5.5 8.6 1.0 10.0 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 7.0 10.6 1.0 12.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 14 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75V32ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT OR GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 25
The S-75V32ANC is a single 2-input OR gat e fabricated by utilizing advanced silicon-gate CMOS technology which provides
the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL IC’s.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 3.8 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
IN B
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5V4
Product code
Logic Diagram
True values
A B Y
L L L
L H H
H L H
IN B
IN A OUT Y
H H H
MINI LOGIC SERIES 2 INPUT OR GATE
S-75V32ANC Rev.3.0_00
Seiko Instruments Inc.
26
Product Name Structure
S-75V32A NC − 5V4 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT OR GATE
Rev.3.0_00 S-75V32ANC
Seiko Instruments Inc. 27
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
0 to 100 (VCC = 3.3±0.3 V) ns
Input rise / fall time tR, tF 0 to 20 (VCC = 5±0.5 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.5 ⎯ ⎯ 1.5 ⎯ V
“H” level VIH ⎯ 3 to 5.5 VCC×0.7 ⎯ ⎯ V
CC×0.7 ⎯ V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5 V
Input
voltage “L” level VIL ⎯ 3 to 5.5 ⎯ ⎯ V
CC×0.3 ⎯ V
CC×0.3 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH VIN = VIL
or VIH
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL V
IN = VIL
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT OR GATE
S-75V32ANC Rev.3.0_00
Seiko Instruments Inc.
28
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 5.5 7.9 1.0 9.5 ns
3.3±0.3 50 ⎯ 10.0 14.0 1.0 15.0 ns
15 ⎯ 3.8 5.5 1.0 6.5 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 6.1 8.5 1.0 9.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 15 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75V86ANC
www.sii-ic.com
MINI LOGIC SERIES
EXCLUSIVE OR GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 29
The S-75V86ANC is a EXCLUSIVE OR GATE fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve ultra high speed operation correspond to LSTTL
IC’s.
All gates of the internal circuitry have buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 5 V to 3 V and battery
backup applications.
Features
• Wide power supply range: 2 V to 5.5 V
• Low current consumption: 1.0 μA max. (at 5.5 V, 25°C)
• Typical propagation delay: tPD = 4.8 ns (at 5 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
IN B
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5V8
Product code
Logic Diagram
True values
A B Y
L L L
L H H
H L H
IN B
IN A OUT Y
H H L
MINI LOGIC SERIES EXCLUSIVE OR GATE
S-75V86ANC Rev.3.0_00
Seiko Instruments Inc.
30
Product Name Structure
S-75V86A NC − 5V8 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +7.0 V
Input voltage VIN −0.5 to +7.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±25 mA
VCC/GND current ICC ±50 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES EXCLUSIVE OR GATE
Rev.3.0_00 S-75V86ANC
Seiko Instruments Inc. 31
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 2 to 5.5 V
Input voltage VIN 0 to 5.5 V
Output voltage VOUT 0 to VCC V
0 to 100 (VCC = 3.3±0.3 V) ns
Input rise / fall time tR, tF 0 to 20 (VCC = 5±0.5 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
2.0 1.5 ⎯ ⎯ 1.5 ⎯ V
“H” level VIH ⎯ 3 to 5.5 VCC×0.7 ⎯ ⎯ V
CC×0.7 ⎯ V
2.0 ⎯ ⎯ 0.5 ⎯ 0.5 V
Input
voltage “L” level VIL ⎯ 3 to 5.5 ⎯ ⎯ V
CC×0.3 ⎯ V
CC×0.3 V
2.0 1.9 2.0 ⎯ 1.9 ⎯ V
3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −50 μA 4.5 4.4 4.5 ⎯ 4.4 ⎯ V
IOH = −4 mA 3.0 2.58 ⎯ ⎯ 2.48 ⎯ V
“H” level VOH VIN = VIL
or VIH
IOH = −8 mA 4.5 3.94 ⎯ ⎯ 3.80 ⎯ V
2.0 ⎯ 0 0.1 ⎯ 0.1 V
3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 50 μA 4.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 4 mA 3.0 ⎯ ⎯ 0.36 ⎯ 0.44 V
Output
voltage
“L” level VOL VIN = VIL
or VIH
IOL = 8 mA 4.5 ⎯ ⎯ 0.36 ⎯ 0.44 V
Input current IIN V
IN = 5.5 V or GND 0 to 5.5 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 5.5 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES EXCLUSIVE OR GATE
S-75V86ANC Rev.3.0_00
Seiko Instruments Inc.
32
AC Electrical Characteristics
(Input tR = tF = 3 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) CL (pF) Min. Typ. Max. Min. Max. Unit
15 ⎯ 7.0 11.0 1.0 13.0 ns
3.3±0.3 50 ⎯ 10.4 14.5 1.0 16.5 ns
15 ⎯ 4.8 6.8 1.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ 5.0±0.5 50 ⎯ 6.5 9.0 1.0 10.0 ns
Input capacitance CIN ⎯ ⎯ 4 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 18 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG tPLH
50%
50%
10%
90%
tPHL
3 ns
VIN
VOUT
3 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L00ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT NAND GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 33
The S-75L00ANC is a single 2-input NAND gate fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 7 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
OUT Y
1
IN B
IN A
GND
VCC
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5L1 Product code
Logic Diagram
True values
A B Y
L L H
L H H
H L H
IN B
IN A OUT Y
H H L
MINI LOGIC SERIES 2 INPUT NAND GATE
S-75L00ANC Rev.3.0_00
Seiko Instruments Inc.
34
Product Name Structure
S-75L00A NC − 5L1 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT NAND GATE
Rev.3.0_00 S-75L00ANC
Seiko Instruments Inc. 35
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH VIN = VIH
or VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT NAND GATE
S-75L00ANC Rev.3.0_00
Seiko Instruments Inc.
36
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.5 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 6.0 9.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 30 60 ⎯ 75 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
VOL
tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L02ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT NOR GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 37
The S-75L02ANC is a single 2-input NOR gate fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 7 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
IN B
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5L3
Product code
Logic Diagram
True values
A B Y
L L H
L H L
H L L
IN B
IN A OUT Y
H H L
MINI LOGIC SERIES 2 INPUT NOR GATE
S-75L02ANC Rev.3.0_00
Seiko Instruments Inc.
38
Product Name Structure
S-75L02A NC − 5L3 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT NOR GATE
Rev.3.0_00 S-75L02ANC
Seiko Instruments Inc. 39
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH V
IN = VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL VIN = VIL
or VIH
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT NOR GATE
S-75L02ANC Rev.3.0_00
Seiko Instruments Inc.
40
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 6.0 9.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 30 60 ⎯ 75 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L04ANC
www.sii-ic.com
MINI LOGIC SERIES
INVERTER
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 41
The S-75L04ANC is an inverter fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent
benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 7 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1 NC
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5L5 Product code
Logic Diagram
True values
A Y
L H
IN A OUT Y
H L
MINI LOGIC SERIES INVERTER
S-75L04ANC Rev.3.0_00
Seiko Instruments Inc.
42
Product Name Structure
S-75L04A NC − 5L5 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES INVERTER
Rev.3.0_00 S-75L04ANC
Seiko Instruments Inc. 43
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH V
IN = VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES INVERTER
S-75L04ANC Rev.3.0_00
Seiko Instruments Inc.
44
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 6.0 9.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 30 60 ⎯ 75 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75LU04ANC
www.sii-ic.com
MINI LOGIC SERIES
INVERTER (unbuffer)
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 45
The S-75LU04ANC is a single packaged inverter without buffer fabricated by utilizing advanced silicon-gate CMOS
technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of
batteries (1 to 3 V).
The S-75LU04ANC is suitable for a wide variety of linear circuits.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 6 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 10% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1 NC
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5L6 Product code
Logic Diagram
True values
A Y
L H
IN A OUT Y
H L
MINI LOGIC SERIES INVERTER (unbuffer)
S-75LU04ANC Rev.3.0_00
Seiko Instruments Inc.
46
Product Name Structure
S-75LU04A NC − 5L6 TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES INVERTER (unbuffer)
Rev.3.0_00 S-75LU04ANC
Seiko Instruments Inc. 47
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH V
IN = VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES INVERTER (unbuffer)
S-75LU04ANC Rev.3.0_00
Seiko Instruments Inc.
48
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 6.0 9.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 4.0 10.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 20 40 ⎯ 50 ns
1.5 ⎯ 10 15 ⎯ 20 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 6 9 ⎯ 12 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L08ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT AND GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 49
The S-75L08ANC is a single 2-Input AND Gate fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 7 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
IN B
GND
VCC
OUT Y
2
3 4
5
(Top view)
1
IN A
32
1
4
(Top view)
5
5L2
Product code
Logic Diagram
True values
A B Y
L L L
L H L
H L L
IN B
IN A OUT Y
H H H
MINI LOGIC SERIES 2 INPUT AND GATE
S-75L08ANC Rev.3.0_00
Seiko Instruments Inc.
50
Product Name Structure
S-75L08A NC − 5L2 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT AND GATE
Rev.3.0_00 S-75L08ANC
Seiko Instruments Inc. 51
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH V
IN = VIH
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL VIN = VIL
or VIH
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT AND GATE
S-75L08ANC Rev.3.0_00
Seiko Instruments Inc.
52
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 6.0 9.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 30 60 ⎯ 75 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L14ANC
www.sii-ic.com
MINI LOGIC SERIES
SCHMITT INVERTER
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 53
The S-75L14ANC is a SCHMITT INVERTER fabricated by utilizing advanced silicon-gate CMOS technology which provides
the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 8 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
NC
IN A
GND
VCC
OUT Y
2
3
4
5
(Top view)
32
1
4
(Top view)
5
5LA
Product code
Logic Diagram
True values
A Y
L H
IN A OUT Y
H L
MINI LOGIC SERIES SCHMITT INVERTER
S-75L14ANC Rev.3.0_00
Seiko Instruments Inc.
54
Product Name Structure
S-75L14A NC − 5LA − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES SCHMITT INVERTER
Rev.3.0_00 S-75L14ANC
Seiko Instruments Inc. 55
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.80 ⎯ ⎯ 0.80 ⎯ V
1.5 1.20 ⎯ ⎯ 1.20 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.20 ⎯ 0.20 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH V
IN = VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL V
IN = VIH
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
1.0 0.20 ⎯ 0.50 ⎯ ⎯ V
1.5 0.25 ⎯ 0.50 ⎯ ⎯ V
Hysteresis Voltage VH ⎯ 3.0 0.45 ⎯ 0.65 ⎯ ⎯ V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES SCHMITT INVERTER
S-75L14ANC Rev.3.0_00
Seiko Instruments Inc.
56
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 4.0 10.5 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 8 12 ⎯ 15 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG
tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L32ANC
www.sii-ic.com
MINI LOGIC SERIES
2 INPUT OR GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 57
The S-75L32ANC is a single 2-input OR gat e fabricated by utilizing advanced silicon-gate CMOS technology which provides
the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 7 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
IN B
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5L4 Product code
Logic Diagram
True values
A B Y
L L L
L H H
H L H
IN B
IN A OUT Y
H H H
MINI LOGIC SERIES 2 INPUT OR GATE
S-75L32ANC Rev.3.0_00
Seiko Instruments Inc.
58
Product Name Structure
S-75L32A NC − 5L4 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES 2 INPUT OR GATE
Rev.3.0_00 S-75L32ANC
Seiko Instruments Inc. 59
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH VIN = VIH
or VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL V
IN = VIL
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES 2 INPUT OR GATE
S-75L32ANC Rev.3.0_00
Seiko Instruments Inc.
60
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 6.0 9.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 30 60 ⎯ 75 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
S-75L86ANC
www.sii-ic.com
MINI LOGIC SERIES
EXCLUSIVE OR GATE
© Seiko Instruments Inc., 1999-2010 Rev.3.0_00
Seiko Instruments Inc. 61
The S-75L86ANC is an EXCLUSIVE OR GATE fabricated by utilizing advanced silicon-gate CMOS technology which
provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).
The internal circuitry has buffered outputs to ensure high noise immunity and output stability.
Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin
and VCC.
This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery
backup applications.
Features
• Wide power supply range: 1 V to 3.6 V
• Low current consumption: 1.0 μA max. (at 3.6 V, 25°C)
• Typical propagation delay: tPD = 7 ns (at 3 V)
• High noise immunity: VNIH = VNIL = 28% VCC min.
• Power down protection: All pins
• Lead-free
Applications
• Personal computers, peripherals
• Cellular phones
• Cameras
• Games
Package
• SC-88A
Pin Configuration Marking Specification
1
IN B
IN A
GND
VCC
OUT Y
2
3 4
5
(Top view)
32
1
4
(Top view)
5
5L8 Product code
Logic Diagram
True values
A B Y
L L L
L H H
H L H
IN B
IN A OUT Y
H H L
MINI LOGIC SERIES EXCLUSIVE OR GATE
S-75L86ANC Rev.3.0_00
Seiko Instruments Inc.
62
Product Name Structure
S-75L86A NC − 5L8 − TF G
Environmental code
G : Lead-free (for details, please contact our sales office)
IC direction in tape specification
Product abbreviation
Package abbreviation
NC : SC-88A
Absolute Maximum Ratings
(Ta = 25°C unless otherwise specified)
Item Symbol Absolute Maximum Ratings Unit
Power supply voltage VCC −0.5 to +5.0 V
Input voltage VIN −0.5 to +5.0 V
Output voltage VOUT −0.5 to VCC + 0.5 V
Input parasitic diode current IIK −20 mA
Output parasitic diode current IOK ±20 mA
Output current IOUT ±12.5 mA
VCC/GND current ICC ±25 mA
200 (When not mounted on board) mW
Power dissipation PD 350*1 mW
Operating ambient temperature Topr −40 to +85 °C
Storage temperature Tstg −65 to +150 °C
Lead temperature (10 s) TL 260 °C
*1. When mounted on board
[Mounted board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
0 50 100 150
350
200
0
Power Dissipation (PD) [mW]
Ambient Temperature (Ta) [°C]
100
300
250
150
50
400
Pow er Dissipation of Package (When Mounted on Board)
MINI LOGIC SERIES EXCLUSIVE OR GATE
Rev.3.0_00 S-75L86ANC
Seiko Instruments Inc. 63
Recommended Operating Conditions
Item Symbol Standard Unit
Power voltage VCC 1 to 3.6 V
Input voltage VIN 0 to 3.6 V
Output voltage VOUT 0 to VCC V
0 to 1000 (VCC = 1.0 V) ns
0 to 500 (VCC = 2.0 V) ns
Input rise / fall time tR, tF 0 to 400 (VCC = 3.0 V) ns
DC Electrical Characteristics
Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol V
CC Min. Typ. Max. Min. Max.
Unit
1.0 0.75 ⎯ ⎯ 0.75 ⎯ V
1.5 1.05 ⎯ ⎯ 1.05 ⎯ V
“H” level VIH ⎯ 3.0 2.10 ⎯ ⎯ 2.10 ⎯ V
1.0 ⎯ ⎯ 0.25 ⎯ 0.25 V
1.5 ⎯ ⎯ 0.45 ⎯ 0.45 V
Input
voltage “L” level VIL ⎯ 3.0 ⎯ ⎯ 0.90 ⎯ 0.90 V
1.0 0.9 1.0 ⎯ 0.9 ⎯ V
1.5 1.4 1.5 ⎯ 1.4 ⎯ V
IOH = −20 μA 3.0 2.9 3.0 ⎯ 2.9 ⎯ V
IOH = −1 mA 1.5 1.07 1.23 ⎯ 0.99 ⎯ V
“H” level VOH VIN = VIH
or VIL
IOH = −2.6 mA 3.0 2.61 2.68 ⎯ 2.55 ⎯ V
1.0 ⎯ 0 0.1 ⎯ 0.1 V
1.5 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 20 μA 3.0 ⎯ 0 0.1 ⎯ 0.1 V
IOL = 1 mA 1.5 ⎯ 0.23 0.31 ⎯ 0.37 V
Output
voltage
“L” level VOL VIN = VIH
or VIL
IOL = 2.6 mA 3.0 ⎯ 0.23 0.31 ⎯ 0.33 V
Input current IIN V
IN = VCC or GND 3.6 ⎯ ⎯ ±0.1 ⎯ ±1.0 μA
Current consumption ICC V
IN = VCC or GND 3.6 ⎯ ⎯ 1.0 ⎯ 10.0 μA
MINI LOGIC SERIES EXCLUSIVE OR GATE
S-75L86ANC Rev.3.0_00
Seiko Instruments Inc.
64
AC Electrical Characteristics
(CL = 15 pf, Input tR = tF = 6 ns, VCC = 3.3±0.3 V, Ta = 25°C unless otherwise specified)
Item Symbol Measurement Conditions Min. Typ. Max. Unit
Output rise / fall time tTLH,
tTHL ⎯ ⎯ 4.0 8.0 ns
Propagation delay time tPLH,
tPHL ⎯ ⎯ 6.0 9.0 ns
(CL = 25 pf, Input tR = tF = 6 ns unless otherwise specified)
Measurement Conditions Ta = 25°C Ta = −40 to 85°C
Item Symbol
V
CC (V) Min. Typ. Max. Min. Max. Unit
1.0 ⎯ 35 70 ⎯ 90 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Output rise / fall time tTLH,
tTHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
1.0 ⎯ 30 60 ⎯ 75 ns
1.5 ⎯ 15 25 ⎯ 30 ns
Propagation delay time tPLH,
tPHL ⎯ 3.0 ⎯ 7 10 ⎯ 14 ns
Input capacitance CIN ⎯ ⎯ 5 10 ⎯ 10 pF
Equivalent internal capacitance CPD*1 ⎯ ⎯ 10 ⎯ ⎯ ⎯ pF
*1. C
PD is the no-load equivalent capacitance inside the circuitry. Refer to the measurement circuit shown below.
Current consumption is averaged by the following equation.
I
CC(opr) = CPD × VCC × fin + ICC
Measurement Circuit
VIN
CL
50 Ω
VOUT
PG tPLH
50%
50%
10%
90%
tPHL
6 ns
VIN
VOUT
6 ns
GND
VCC
VOL
VOH
50%
Remark No-load output during measurement of current consumption.
Input Pin Equivalent Circuit
Inp ut pin
No.
TITLE
SCALE
UNIT mm
2.0±0.2
1.3±0.1
0.15+0.1
-0.05
0.2+0.1
-0.05
0.650.65
13
45
2
No. NP005-B-P-SD-1.1
SC88A-B-PKG Dimensions
NP005-B-P-SD-1.1
Seiko Instruments Inc.
No.
TITLE
SCALE
UNIT mm
(2.25)
4.0±0.1 2.0±0.1
4.0±0.1
ø1.55±0.05
ø1.05±0.1
0.2±0.05
1.1±0.1
0.3
2.05±0.1
1
2
3
45
Seiko Instruments Inc.
No. NP005-B-C-SD-2.0
NP005-B-C-SD-2.0
SC88A-B-Carrier Tape
Feed direction
No.
TITLE
SCALE
UNIT mm
QTY. 3000
12.5max.
9.0±0.3
ø13±0.2
(60°) (60°)
Seiko Instruments Inc.
No. NP005-B-R-SD-2.1
NP005-B-R-SD-2.1
SC88A-B-Reel
Enlarged drawing in the central part
www.sii-ic.com
• The information described herein is subject to change without notice.
• Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein
whose related industrial properties, patents, or other rights belong to third parties. The application circuit
examples explain typical applications of the products, and do not guarantee the success of any specific
mass-production design.
• When the products described herein are regulated products subject to the Wassenaar Arrangement or other
agreements, they may not be exported without authorization from the approp riate governmental authority.
• Use of the information described herein for other purposes and/or reproduction or copying without the
express permissi on of Seiko Instruments Inc. is strictly prohibited.
• The products described herein cannot be used as part of any device or equipment affecting the human
body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus
installed in airplanes and other vehicle s, without prior written permission of Seiko Instruments Inc.
• The products described herein are not designed to be radiation-proof.
• Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the
failure or malfunction of semiconductor products may occur. The user of these products should therefore
give thorough consideration to safety design, including redundancy, fire-prevention measures, and
malfunction prevention, to prevent any accidents, fires, or comm unity damage that may ensue.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Seiko Instruments:
S-75L02ANC-5L3-TFG S-75VU04ANC-5V6TFG S-75L04ANC-5L5-TFG S-75L86ANC-5L8-TFG S-75LU04ANC-
5L6TFG S-75V08ANC-5V2-TFG S-75V86ANC-5V8-TFG S-75V14ANC-5VA-TFG S-75L08ANC-5L2-TFG S-
75V32ANC-5V4-TFG S-75L32ANC-5L4-TFG S-75L14ANC-5LA-TFG S-75L00ANC-5L1-TFG S-75V02ANC-5V3-TFG
S-75V04ANC-5V5-TFG S-75V00ANC-5V1-TFG
