KBPC15, 25, 35G/W SERIES W TE PO WE R SEM IC O ND UC TO R S 15, 25, 35A GLASS PASSIVATED BRIDGE RECTIFIER Features ! Glass Passivated Die Construction A ! ! ! Low Reverse Leakage Current Low Power Loss, High Efficiency Electrically Isolated Epoxy Case for Maximum Heat Dissipation Case to Terminal Isolation Voltage 2500V C ! A C G G ~ D + ~ - C ! ! ! ! - ~ D H Mechanical Data ! + C H ! ~ E Case: Epoxy Case with Heat Sink Internally Mounted in the Bridge Encapsulation Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Symbols Marked on Case Mounting: Through Hole for #10 Screw Weight: KBPC-G 24 grams (approx.) KBPC-GW 21 grams (approx.) Marking: Type Number E B B Metal Heat Sink KBPC-G KBPC-GW KBPC-G Dim A B C D E G H "W" Suffix Designates Wire Leads No Suffix Designates Faston Terminals *All Models are Available on B(Height)=7.9mm Max. Epoxy Case Maximum Ratings and Electrical Characteristics KBPC-GW Min Max Min Max 28.40 28.70 28.40 28.70 10.97 11.23 10.97 11.23 15.70 16.70 17.10 19.10 17.50 18.50 10.90 11.90 22.86 25.40 30.50 -- Hole for #10 screw, 5.08O Nominal 6.35 Typical 0.97O 1.07O All Dimension in mm @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage -00G/W -01G/W -02G/W -04G/W -06G/W -08G/W -10G/W Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectifier Output Current @TC = 55C KBPC15 KBPC25 KBPC35 IO 15 25 35 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave Superimposed on rated load (JEDEC Method) KBPC15 KBPC25 KBPC35 IFSM 300 300 400 A VFM 1.1 V Forward Voltage Drop (per element) KBPC15 @IF = 7.5A KBPC25 @IF = 12.5A KBPC35 @IF = 17.5A Peark Reverse Current At Rated DC Blocking Voltage @TC = 25C @TC = 125C IRM 5.0 500 A I2t Rating for Fusing (t < 8.3ms) (Note 1) KBPC15 KBPC25 KBPC35 I2t 375 375 660 A2s KBPC15, 25, 35G/W SERIES 1 of 4 (c) 2002 Won-Top Electronics Maximum Ratings and Electrical Characteristics Typical Junction Capacitance (per element) (Note 2) Typical Thermal Resistance Junction to Case (per element) (Note 3) KBPC15 KBPC25 KBPC35 RMS Isolation Voltage from Case to Lead Operating and Storage Temperature Range @TA=25C unless otherwise specified Cj 300 pF RJC 5.3 3.6 3.0 K/W VISO 2500 V Tj, TSTG -65 to +150 C Note: 1. Measured at non-repetitive, for t > 1ms and < 8.3ms. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 3. Thermal resistance junction to case mounted on heatsink. KBPC15, 25, 35G/W SERIES 2 of 4 (c) 2002 Won-Top Electronics Mounted on a 220 x 220 x 50 mm AL plate heatsink KBPC35 IF, AVERAGE FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 40 30 KBPC25 20 KBPC15 10 Resistive or Inductive load 0 0 25 50 75 100 125 100 10 KBPC15, 25 1.0 KBPC35 0.1 Tj = 25C Pulse Width = 300s 0.01 150 0 0.8 1.0 1.2 1.4 1.6 1.8 1000 Single Half-Sine Wave (JEDEC Method) f = 1 Mhz Tj = 25C 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0.4 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (C) Fig. 1 Forward. Current Derating Curve 400 0.2 KBPC35 200 KBPC15, 25 100 100 Tj = 150C 0 1 10 100 10 0.1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 1.0 100 Tj = 125C 10 1.0 0.1 Tj = 25C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) KBPC15, 25, 35G/W SERIES 3 of 4 (c) 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity KBPCxx00G Square Bridge 50 Units/Box KBPCxx00GW Square Bridge 50 Units/Box KBPCxx01G Square Bridge 50 Units/Box KBPCxx01GW Square Bridge 50 Units/Box KBPCxx02G Square Bridge 50 Units/Box KBPCxx02GW Square Bridge 50 Units/Box KBPCxx04G Square Bridge 50 Units/Box KBPCxx04GW Square Bridge 50 Units/Box KBPCxx06G Square Bridge 50 Units/Box KBPCxx06GW Square Bridge 50 Units/Box KBPCxx08G Square Bridge 50 Units/Box KBPCxx08GW Square Bridge 50 Units/Box KBPCxx10G Square Bridge 50 Units/Box KBPCxx10GW Square Bridge 50 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com KBPC15, 25, 35G/W SERIES We power your everyday. 4 of 4 (c) 2002 Won-Top Electronics