POWER
LCC600
600 Watts Conduction Cooling
Total Power: 600 W
# of Outputs: Single
Outputs: 12, 28, 36, 48 Vdc
SPECIAL FEATURES
600 W full power at elevated
temperatures
Wide operating temperature range
(-40 °C to 85 °C baseplate)
Adjustable output
Remote output On/Off
AC_OK; DC_OK signals
5 V standby voltage
Active current share
Conduction-cooled/fanless
I2C / PMBus
Medical and ITE Safety3
Suited for BF-type applications
Active power factor correction
Optional IP65 variant
Optional 277 Vac input variant
COMPLIANCE
EMI Class B
EN61000 Immunity
SAFETY
UL + CSA: 60950-1 2nd Ed.
ANSI ES60601-13
UL 87505
CSA-C22.2 No. 250.135
TÜV: 60950-1 2nd Ed.
60601-1 3rd Ed.3
EN 61347-1; -2-135
CB Scheme: IEC 60950-1
IEC 60601-1
IEC 61347-1; -2-135
China CCC
CE Mark
Electrical Specications
Input
Input ra nge U Sufx: 90 - 264 Vac (Safety rating:100 - 240 Vac)
127 - 374 Vdc4
H Sufx: 180 - 305 Vac (Safety rating: 200 - 277 Vac)
254 - 420 Vdc4
Frequency 47 - 63 / 440 Hz (Safety rating: 50/60 Hz)
Input fusing Internal fuse on both L and N lines (12.5 A - U sufx; 7 A - H sufx)
EMI/RFI FCC Class B, CISPR22/EN55022 Class B
MIL-STD-461F EMI1Compliance to CE101, 102; CS101, 114, 115, 116 (with external lter1)
Inrush current ≤ 25 A peak
Power factor 0.99 typical
Harmonics Meets EN61000-3-2 Class A and Class C2
Input current < 10 Arms @ 100 Vac
Hold up time 20 ms min for Main Output (230 Vac) @ 100% Load
Efciency 93.3% typical @ 230 Vac; 100% Load; 28 Vdc
Leakage current3
U Sufx: 115 µA typical (< 200 µA max per ANSI/ES60601-1 264 Vac
split-phase / 60 Hz)
387 µA typical (< 500 µA max per IEC60601-1; 264 Vac / 50Hz)
H Sufx: 0.2 mA typical (< 3.5 mA max per ITE 60950-1 Standard)
Isolation voltage U Sufx H Sufx
PRI-SEC: 4,000 Vac (2X MOPP) 3,000 Vac
PRI-Chassis: 1,500 Vac (1X MOPP) 2,000 Vac
SEC-Chassis: 1,500 Vac (1X MOPP) 1,500 Vac
Data Sheet
1Artesyn Filter PN: 700-014447-0000 (Zhongguang PN: ZGLPG-10-02M).
2Meets Class C ≥ 50% load.
3U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only.
4DC input rating not part of product’s Safety approval.
5LED Lighting approvals apply to all 48 V output variants.
LCC600 Data Sheet
Environmental Specications
Operating temperature range -40 °C to +85 °C Baseplate temperature
Storage temperature -40 °C to +85 °C
Humidity 10% to 95%
Altitude 16,402 ft (Operating) / 50,000 ft (Non-Operating)
Shock MIL-STD-810F 516.5 Procedure I, VI
Vibration MIL-STD-810F 514.5 Cat. 4, 10
Ingress protection IP65 (for sufx “-4P”)
MTBF (calculated) >2M Hrs, 25 °C per SR-332 Issue 3
Electromagnetic immunity Designed to meet EN61000-4-3, -4, -5, -8, -11 (Level 3); EN61000-4-2 (Level 4); EN60601-1-2 and EN55024
For H sufx, Level 4 for EN61000-4-5
Electrical Specications
Output
Output rating See Ordering Information table
Standby output 5.0 Vdc @ 1.5 A Max
Set point ± 0.5% Factory set point
Total regulation Main Output: ± 2.0%
5 Vsb: ± 5%
Combined Line / Load / Temperature
Rated load 600 W maximum 600 W from -40 °C to 85 °C Baseplate Temp. Derate output
to 28 W @ 95 °C Baseplate Temp
Minimum load 0 A For both Main and 5 Vsb Outputs
Output voltage adjust range See Ordering Information table Max power limited to 600 W
Output noise Main Output: 1.0% max p-p
5 Vsb: 60 mV max p-p
Measured with 0.1 μF Ceramic and 10 μF Tantalum Cap,
20 MHz BW
Remote sense Compensation up to 500 mV Pin 10: +Vout_RS / Pin4: -Vout_RS
Overcurrent protection
105 - 130% of full load current
Default is Shutdown mode with Auto-retry every 2~4 sec.
Output latches after 20 sec of continuous OCP fault
presence. Restart after latch possible through AC recycle,
Inhibit toggle or through PMBus.
Overvoltage protection 125 - 145% Vo, nom Main Output
125 - 130% 5 Vsb
Latching / AC Recyle or Inhibit toggle required for PSU
restart
Overtemperature protection > 95 °C Baseplate temperature Output Shutdown / Auto-recovery
AC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when AC is present
DC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when Main Output is within regulation
Remote inhibit Contact Closure Pin 19: Open/Float = ON; Close/Ground = OFF
# Units in parallel operation Qualied up to 5 units in parallel. Consult factory if
more than 5 are required. Pin 5: IShare pin for main output only.
Output dimming 0-10 Vdc external voltage;
0-100 kOhm external resistance
Consult with productsupport.ep@artesyn.com
LCC600 Data Sheet
Ordering Information
Model Number* AC Input Output
Setpoint
Setpoint
Tolerance
Output Current [A] Max O/P Typical
Efficiency** Standby Output
Combined
Line/Load
Regulation
Output
Ripple
Min Max Power [W]
LCC600-48U-4PD(1) 90 - 264 54 V ±0.5% 0 11.1 600 93.0% 5 Vdc @ 1.5 A 2% 1%
LCC600-48U-9P 90 - 264
48 V ±0.5% 0 12.5 600 93.0% 5 Vdc @ 1.5 A 2% 1%
LCC600-48H-9P 180 - 305
LCC600-36U-9P 90 - 264
36 V ±0.5% 0 16.7 600 92.0% 5 Vdc @ 1.5 A 2% 1%
LCC600-36H-9P 180 - 305
LCC600-28U-9P24 90 - 264 24 V ±0.5% 0 25 600 93.0% 5 Vdc @ 1.5 A 2% 1%
LCC600-28U-9P 90 - 264
28 V ±0.5% 0 25*** 600 93.5% 5 Vdc @ 1.5 A 2% 1%
LCC600-28H-9P 180 - 305
LCC600-12U-9P 90 - 264
12 V ±0.5% 0 50 600 92.3% 5 Vdc @ 1.5 A 2% 1%
LCC600-12H-9P 180 - 305
*Change sufx “-9P” to “-4P” for IP65 rated enclosure with y lead wires
*Change sufx “-4P” to “-4PR” for IP65 rated enclosure with right angle y lead wires (applies to 28, 36, 48 Vdc)
*Change sufx “-4P” to “-4PV” to omit the control cable (applies to 28, 36, 48 Vdc)
* Add sufx “CC” for Constant Current setting (e.g. “-4PCC”; “-9PCC”).
**Typical efciency at high line, factory default voltage and full load
***When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout is 21.43 A (600 W max).
(1) “D” sufx for 0-10 Vdc analog external volatge dimming (11.1 A CC limit). Consult Technical Reference Notes for additional details.
Mechanical Drawings
-9P Suffix
SIGNAL PIN LOCATIONS
4-POSITION TERMINAL BLOCK
M4x8 SCREW, 10mm PITCH
WITH PLASTIC COVER
(SEE NOTE 7)
MODEL LABEL
TRIMPOT WINDOW
3-POSITION LOCKING CONNECTOR
(TYCO P/N: 1-350943-0 OR EQUIVALENT)
MATE WITH TYCO P/N: 350766-1 (HOUSING)
& 350536-1 (CONTACT TERMINAL)
CUSTOMER MOUNTING HOLE
FIT WITH M4 SCREW
(6 PL)
HEADER CONNECTOR
(J1501)
MATE WITH P/N: JST PN PHDR-20VS (HOUSING)
& JST PN SPHD-001T-P0.5 (CONTAC PINS)
(SEE PIN LOCATION DETAILS)
PIN 2 PIN 1
PIN 19
PIN 20
228 0.50
228 0.50
101 0.50
85.0 0.50
39.8
+0.7
-0.3
(29.7)
(35.50)
(2.2)
73.34 73.34
93.00
40.66
0.20
Notes:
1) Recommended mounting screw is M4 in 6 locations; 8-10 kgf-cm torque.
2) Baseplate material/nish: 5 mm Aluminum with Black Anodized.
3) Weight: 9P Sufx: 1.63 kg typical
4P Sufx: 1.81 kg typical
4) Thermal hotspot reference is in the middle of the baseplate.
LCC600 Data Sheet
CUT EXPOSED LEADS OF SIGNAL WIRES
TRIMPOT LOCATION
MODEL LABEL
UL2517 14AWGX4C
UL2517 26AWGX20C+AL
SJTW 18AWGX3C
CUSTOMER MOUNTING HOLE 4.6
FIT WITH M4 SCREW
(6 PL)
(21.4)
228 0.5
(50.5)
101 0.5
85 0.5
39.8
+0.7
-0.3
228 0.5
(30)
300 10
(3-93.0)
(2-146.7)
(2-73.3)
300 10
(30)
(2-40.7)
8.5
84.41 0.5
290 10
0.2
-4P Suffix (28, 36, 48 Vdc)
Mechanical Drawings
-4P Suffix (12 Vdc)
228 0.5 3X- 307 10
59 0.5
46 0.5
(5)
(22)
(50.5)
85 0.50
40.50max
101 0.50
(2X-73.3)
(2X-146.7) (2X-40.7)
(3X-93)
300 10
(24)
0.2
ARTESYN P/N:
750-006769-000X
(INPUT CABLE ASSY)
TIN DIP
THW OR MTW
AWG 6 WIRE
TIN DIP
TRIMPOT LOCATION
UL2517
26AWGX20C
RATING AND SAFETY LOGO LABEL
ARTESYN P/N:
750-007030-00XX
(OUTPUT CABLE ASSY)
SEE NOTE 9
REFERENCE POINT
HEIGHT MEASUREMENT
CUSTOMER MOUNTING HOLE 4.6
FIT WITH M4 SCREW (SEE NOTE 8)
(6 PL)
LCC600 Data Sheet
Mechanical Drawings
-4PR Suffix (28, 36, 48 Vdc)
TIN DIP WIRES
MODEL
LABEL
TRIMPOT
LOCATION
HEIGHT MEASUREMENT
REFERENCE POINT
0.2
UL2517 26AWGX20C+AL
UL2517 14AWGX4C
CUSTOMER MOUNTING HOLE 4.6
FIT WITH M4 SCREW
SJTW 18AWGX3C
265.0 2.0
40.66 73.34 73.34
146.68
93 (3X)
300 10
45
80.1
45
228 0.5
30
101 0.5
10
40.5 MAX
300 10
0.2
LCC600 Data Sheet
Pin Assignment (INPUT)
-9Px Sufx -4Px Sufx
DESCRIPTION DESIGNATION NOTES DESIGNATION NOTES
Live L1 Mating Connector:
350766-1 (Housing);
350536-1 (Contact Terminals)
Brown SJTW 18AWGX3C;
PVC jacket;
105 °C / 300 V
Neutral L2 Blue
Ground G Y/GR
Pin Assignment (MAIN OUTPUT)
-9Px Sufx -4Px Sufx (28, 36, 48 Vdc) -4Px Sufx (12 Vdc)
DESCRIPTION DESIGNATION NOTES DESIGNATION NOTES DESIGNATION NOTES
Main Output +Vout 4 Position Terminal Block: M4
Screw/10mm Pitch; 12kgf-cm
Torque; Accepts 14-16AWG
Ring Tongue - Spade Terminals
MOLEX BB-124-08 (19141-
0058) or EQUIVALENT
Red
14AWGX4C;
PVC jacket;
105 °C / 300 V
Red 6AWG Multi-Strand;
PVC jacket;
105 °C / 600 V
Red
Main Output
Return GND -Vout
Black
Black
Black
Pin Assignment
J1501 - Signal & Control -9Px Sufx -4Px Sufx
SIGNALS DESCRIPTION PIN # NOTES WIRE COLOR NOTES
A2_OUT EEPROM Address 1
J1501 Mating
Connector:
JST PN
PHDR-20VS
Contact Pins:
JST PN SPHD-
001T-P0.5
BLACK
26AWGX20C+AL;
PVC jacket;
105 °C / 300 V
GND Ground 2 BROWN
A1_OUT EEPROM Address 3 RED
-VOUT_RS Remote Sense Return (Main O/P) 4 ORANGE
ISHARE Load Share Voltage 5 YELLOW
A0_OUT EEPROM Address 6 GREEN
SDA Serial Data Signal (I2C) 7 BLUE
SPARE_1 Spare/Unused Pin (Dimming input for “-4PD” sufx) 8 VIOLET
SCL Serial clock Signal (I2C) 9 GRAY
+VOUT_RS Remote Sense (Main O/P) 10 WHITE
5VSB 5V Standby (1.5A Max) 11 PINK
SGND 5V Standby Return 12 LIGHT BLUE
SPARE_2 Spare/Unused Pin 13 WHITE/VIOLET
G_DCOK_C Global DC_OK Collector 14 WHITE/YELLOW
WP EEPROM Write Protect 15 WHITE/ORANGE
G_DCOK_E Global DC_OK Emitter (GND) 16 WHITE/BLACK
GND Return GND for O/P Signal and I2C communication 17 WHITE/RED
G_ACOK_C Global AC_OK Collector 18 WHITE/BROWN
INH_EN Output Inhibit_Enable Pin (turns output off) 19 WHITE/GREEN
G_ACOK_E Global AC_OK Emitter (GND) 20 WHITE/BLUE
LCC600 Data Sheet
Figure 1. Output Power vs. Baseplate Temperature Figure 2. Output Power vs. Input Voltage
Figure 3. Typical Efciency for 28 V output Figure 4. Typical Efciency for 48 V output
Power Derating Curves
Efciency Curves
Figure 5. Typical Efciency for 36 V output Figure 6. Typical Efciency for 12 V output
LCC600 Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
www.artesyn.com
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. Specifications are subject to change without
notice. © 2018 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions,
please visit www.artesyn.com/legal.
LCC600 DS 28Mar2018
ACCESSORIES
Orderable Part Number Description Diagram
70-841-030 For Sufx "-9P" AC Input Mating Connector Cable Assembly
(w/ 0.3 m wire length)
73-788-001 J1501 (20 Pin Control Signal) Mating Connector with 0.3 m
wires attached for "-9P" sufx
70-841-031 Pre-Cut thermal insulator (Laird TFLEX HR220FG)
700-014447-0000 MIL-STD-461F AC input In-line EMI lter (Zhongguang
ZGLPG-10-02M)
73-769-002 USB to I2C High Speed Adaptor for PMBus Communication
750-007213-0000 J1501 (20 Pin) Mating connector with 10 Pin header termination
for use with 73-769-002
466-003103-0000 Test Heatsink for unit characterization. Size: 331 x 220 x 69 mm;
Aluminum with natural nish; Weight = 1.7 kgs
PIN 20
PIN 2
PIN 19
PIN 1
PIN 3
300 ± 5 mm
A
4
7
9
17
500±5
(17X) 300±3
B
C
A
FD
E
50.0±3
150±3
2
15±3
M
O
215±5