8 6 7 4 5 3 2 1 REVISION(S) 2 2-FIN HEAT SINK: 1.375 DIA. 0.332 HT. D LTR DESCRIPTION O A 0S60-0040-04 ECR-06-014978 INIT APP'D E.T 02/18/04 B.P 02/23/04 E.T 6/23/06 V.K 6/26/06 D 1. MATERIAL: HEAT SINK: ALUM. (BLACK ANODIZE) CLIP: BLACK PEI (UL94-VO) 1 3 2-LEGS CLIP SIZE: 21mm 2. BEFORE THE HEATSINK APPLICATION, THE USER SHOULD IDENTIFY THE SPECIFICATION OF MAXIMUM LOAD ON THE BGA PACKAGE. HEATSINK TORQUE SPECIFICATIONS CONVERTED TO FORCE. BARE DIE PACKAGE: 1.5 POUND-FORCE INCH TORQUE = 8.5 POUND-FORCE (0.17 NEWTON TORQUE = 37.81 NEWTON) 2.0 POUND-FORCE INCH TORQUE = 11.4 POUND-FORCE (0.23 NEWTON METER TORQUE = 50.71NEWTON) C C FULL SIZE LID PACKAGE: 1.5 POUND-FORCE INCH TORQUE = 8.3 POUND-FORCE (0.17 NEWTON TORQUE = 36.92NEWTON) .017.002 2.0 POUND-FORCE INCH TORQUE = 11.1 POUND-FORCE (0.23 NEWTON METER TORQUE = 49.38NEWTON) DETAIL A SCALE= 6X 1.375.020 3. REMOVE CLIP WITH REMOVAL TOOL P/N: 1542616-1. 4. RoHS COMPLIANT AND CERTIFIED. B .073 B B .205 MAX .332 .240.005 A 5/8 - 27 UNS - 2A THREAD B .113.005 SECTION B-B .831 LIP LEG Power 8 7 5 Watts 13.43 7.22 4.85 4.05 10 Watts 12.23 7.08 4.67 3.96 15 Watts 11.26 7.24 4.70 3.92 ITEM DESCRIPTION QTY 1 MOUNTING CLIP 1 2 HEAT SINK 1 3 INTERFACE 1 DO NOT SCALE .946 A C/W @ C/W @ C/W @ C/W @ Ambient 200 LFM 400 LFM 600 LFM UNLESS OTHERWISE SPECIFIED TOLERANCES ARE: .XX .XXX .XXXX ANGLES . DRAWN BY: DATE E.TAO MATERIAL: 02/18/04 B.P . SPECIFICATIONS ARE SUBJECT TO CHANGE W ITHOUT NOTICE SEE NOTE DATE ENGINEER: . CUSTOMER DRAWING FILENAME 02/23/04 PROJECT SYSTEM CONFIDENTIAL PROPERTY OF TYCO ELECTRONICS. NOT TO BE DISCLOSED TO OTHERS. REPRODUCED OR USED FOR ANY PURPOSES EXCEPT AS AUTHORIZED IN WRITING BY AN AUTHORIZED OFFICIAL OF TYCO. MUST BE RETURNED TO TYCO ON DEMAND, ON COMPLETION OF ORDERS OR OTHER PURPOSES FOR WHICH LENT. DIMENSONS ARE IN: FINISH: INCHES SEE NOTE SCALE: 2:1 SIZE: TNIRD ANGLE PROJECTION A TITLE: 21mm HEATSINK ASSEMBLY (HTS144-P) PART NO: 2-1542000-8 DWG. NO. C-2-1542000-8 SHEET: 1 OF 1 REV: A A