®
© Coilcraft, Inc. 2013
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email cps@coilcraft.com
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
0805 POWER INDUCTORS
L2
DCR4
SRF5
Part ±10% Q min3 max typ Isat6
Irms7
number1 (µH) at 1 MHz (Ohms) (MHz) (A) (A)
ST336PHA102KLZ 1.0 21 0.14 340 0.90 1.6
ST336PHA152KLZ 1.5 21 0.18 265 0.85 1.3
ST336PHA272KLZ 2.7 21 0.35 190 0.60 0.88
ST336PHA332KLZ 3.3 21 0.50 180 0.55 0.70
ST336PHA392KLZ 3.9 21 0.74 165 0.50 0.61
ST336PHA472KLZ 4.7 21 0.85 155 0.43 0.59
ST336PHA562KLZ 5.6 21 0.91 143 0.38 0.57
ST336PHA682KLZ 6.8 21 1.37 118 0.32 0.46
ST336PHA103KLZ 10 21 1.51 66 0.27 0.43
ST336PHA153KLZ 15 21 2.04 34 0.22 0.34
ST336PHA223KLZ 22 25 2.48 22 0.18 0.33
ST336PHA333KLZ 33 25 3.00 17 0.16 0.28
ST336PHA473KLZ 47 25 3.85 15 0.15 0.26
ST336PHA683KLZ 68 28 4.42 12 0.12 0.24
ST336PHA823KLZ 82 30 6.00 12 0.11 0.21
ST336PHA104KLZ 100 32 6.96 9.0 0.10 0.19
ST336PHA124KLZ 120 32 7.51 7.7 0.10 0.18
ST336PHA154KLZ 150 32 8.33 5.0 0.08 0.18
ST336PHA224KLZ 220 32 13.71 5.0 0.07 0.14
ST336PHA334KLZ 330 32 20.53 3.5 0.06 0.11
1. When ordering, please specify testing code:
ST336PHA334KLZ
Testing: Z = COTS
H = Group A screening per Coilcraft CP-SA-10001
2. Inductance measured at 100 kHz, 0.1 Vrms, using a Coilcraft SMD -A
fixture in Agilent/HP 4263B LCR meter.
3. Q measured on an Agilent/HP 4291 with an Agilent/HP 16193 test
fixture.
4. DCR measured on a micro-ohmmeter and a Coilcraft CCF840 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DC current at which the inductance drops 10% (typ) from its value
without current.
7. Current that causes a 40°C temperature rise from 25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Power Inductor for Critical Applications ST336PHA
■ Shielded power inductors
■ Excellent current handling for a part this size; low DCR
Core material Ceramic/Ferrite
Terminations Silver-palladium-platinum-glass frit. Other terminations
available at additional cost.
Weight 57.6 – 62.4 mg
Ambient temperature –40°C to +65°C with Irms current, +65°C to
+105°C with derated current
Storage temperature Component: –55°C to +105°C.
Packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 1500/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 2.34 mm pocket depth
Document ST265-1 Revised 06/12/13
®
© Coilcraft, Inc. 2013
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email cps@coilcraft.com
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
0805 POWER INDUCTORS
Document ST265-2 Revised 06/12/13
Power Inductor for Critical Applications – ST336PHA
0.1
1
10
100
1000
110100 1000
Current (mA)
Inductance (µH)
10 µH
3.3 µH
330 µH
100 µH
1µH
A B C
max max max D E F G H I J
0.133 0.118 0.079 0.053 0.080 0.050 0.020 0.070 0.040 0.030 inches
3,38 3,00 2,00 1,35 2,03 1,27 0,51 1,78 1,02 0,76 mm
Typical L vs Frequency Typical L vs Current
0.1
1
10
100
1000
0.01 0.1
11
0
Frequency (MHz)
Inductance (µH)
10 µH
3.3 µH
330 µH
100 µH
1µH
0.1
11
0
Frequency (MHz)
Q factor
10 µH
3.3 µH
330 µH
1µH
100 µH
70
60
50
40
30
20
10
0
Typical Q vs Frequency
Note: Height dimension is before optional solder application. For maxi-
mum height including solder, add 0.006 in / 0,15 mm.
A
B
FD
C
E
G
I
I
J
H
Recommended
Land
Pattern
Te rminal wraparound:
approx 0.010/0,25 both ends
Suggested
Land Pattern
Irms Derating
-40 -20 020406080100 120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
