Series A1000 & Series CB1000
Single Row Terminal Blocks
SPECIFICATIONS
Rating: 20A, 250V*
Center Spacing: 0.325” (8.26mm)
Wire Range: #14-22 AWG CU
Screw Size: #6-32 zinc-plated philslot wire-ready screws
with a #2 driving recess.
Torque Rating: 9 lb-in.
Base: Standoffs are standard on CB1000 Series
for easy flux washing.
Distance Between Barriers: 0.26” (6.6mm)
Recommended PCB Hole Diameter: 0.070” (1.78mm)
Operating Temperature: 105°C (221°F) max., -40°C
(-40°F) min.
Molded Material: Black, UL Rated 94V0 Thermoplastic
Breakdown Voltage: 1600V
Agency Information: UL/CSA; IEC Compliance;
CE Certified; UL File: E62622, CSA File: 15364
*General industrial applications
A102206
* Dimensions in inches. To convert to millimeters, multiply by 25.4.
C
A Mount Centers
0.50
(12.7)
B Pole Centers
0.325
(8.26)
Mount End Barrier End
Mount End Barrier End
0.25
(6.4)
0.50
(12.7)
0.15
(3.8)
Ø
A1000 Series
C
0.60
(15.2)
0.52
(13.2)
0.025
(0.64)
0.27
(6.9)
0.325
(8.26)
0.25
(6.4) Mount End Barrier End
Mount End Barrier End
B Pole Centers
A Mount Centers
0.15
(3.8)
Ø
CB1000 Series
CB10210707
MOUNTING BARRIER & BARRIER
ENDS MOUNTING ENDS
ONLY ENDS ONLY
AC B C
Poles Mount Ctrs. Length Pole Ctrs. Length
02 0.98 1.37 0.33 0.72
03 1.30 1.69 0.65 1.04
04 1.63 2.02 0.98 1.37
05 1.95 2.34 1.30 1.69
06 2.28 2.67 1.63 2.02
07 2.60 2.99 1.95 2.34
08 2.93 3.32 2.28 2.67
09 3.25 3.64 2.60 2.99
10 3.58 3.97 2.93 3.32
11 3.90 4.29 3.25 3.64
12 4.23 4.62 3.58 3.97
13 4.55 4.94 3.90 4.29
14 4.88 5.27 4.23 4.62
15 5.20 5.59 4.55 4.94
16 5.53 5.92 4.88 5.27
17 5.85 6.24 5.20 5.59
18 6.18 6.57 5.53 5.92
19 6.50 6.89 5.85 6.24
20 6.83 7.22 6.18 6.57
21 7.15 7.54 6.50 6.89
22 7.48 7.87 6.83 7.22
23 7.80 8.19 7.15 7.54
24 8.13 8.52 7.48 7.87
25 8.45 8.84 7.80 8.19
26 8.78 9.17 8.13 8.52
27 9.10 9.49 8.45 8.84
28 9.43 9.82 8.78 9.17
29 9.75 10.14 9.10 9.49
30 10.08 10.47 9.43 9.82
31 10.40 10.79 9.75 10.14
32 10.73 11.12 10.08 10.47
33 11.05 11.44 10.40 10.79
34 11.38 11.77 10.73 11.12
35 – – 11.05 11.44
36 – – 11.38 11.77
Dimensions - in (mm)
Terminal Blocks - Single Row
®
MAGNUM
Part Numbering System
Terminal Styles Inches (Millimeters)
Screw Options Wire ready screws standard on all terminal styles
Hardware Options (Bulk ordering part numbers are in parentheses.) Inches (Millimeters)
Series Terminal Style Base/End Poles Screw Options Options
A1
- standard barrier
02
- printed circuit
1
- mount end
02
to
36 Blank
- std. screws
AB & DR
- angle mts. (A1 only-pg 5)
CB1
- closed back
03
- non feed-thru
2
- barrier end
02
to
34
on mount
03
- stainless steel
B1
to
B9
- 0.187” QC (all positions)
04
- wire wrap tail end base
04
- nickel brass
EB
- exit back terminals on CB1 w/07 screw
07
- extended pin
07
- steel SEMS & option only
washer (not †
JA
,
JB
&
JC
- barrier jumpers
available with
L1
to
L6
marking options (pg 22)
hardware options
)
LT1
to
LT6
marking options (CB1 only-pg 22)
09
- brass/nickel-plated SEMS
MP & MT
- mounting plates 0.150 dia (pg 5)
Covers
- (pg 23)
CA
- standard captive screw
R26&R45
- right angle bends (A1 only-pg 5)
0.16
(4.1)
0.055
(1.40)
0.032
(0.81
0.14
(3.6)
0.35
(8.9)
0.055
(1.40)
0.032
(0.81)
0.14
(3.6)
04
Wire Wrap Tail
03
Non Feed-Thru
02
Printed Circuit
03
Stainless Steel 04
Brass Nickel-Plated 09
Nickel-plated Brass Screws
07
Steel SEMS Zinc-Plated
Jumpers Quick Connects Blade Width B = 0.187”. (For other orientations, contact factory.)
B1 (1B1-J) * B2 (1B2-J) * B3 (1B3-J) *
B9 (1B9-J)
0.33 (8.4)
†
JB (JB1-XX)
B4 (1B4-J) *
B5 (1B5-J) * B6 (1B6-J) * B7 (1B7-J) B8 (1B8-J)
0.33 (8.4)
√JA (JA1-XX)
0.33 (8.4)
†
JC (JC1-XX)
0.54
(13.7)
0.055
(1.40)
0.032
(0.81)
0.14
(3.6)
07
Extended Pin
* N/A on CB1 Series.
†Contact factory for pole configuration...
Exit Rear (std.) EB
Exit Back
CB1 T
erminal Exit Options Inches (Millimeters)
0.12
(3.0)
0.275
(6.98)
A 1
C B 1
Standard
Zinc-Plated Steel
Terminal Blocks - Single Row
Series A1000 & CB1000
Single Row Terminal Blocks Continued
Mounting Options Inches (Millimeters)
X
Z
Bend
Option X Z
Code (minimum)
R26 (04 terminal only) 0.14 (3.5) 0.09 (2.3)
R45 (07 terminal only) 0.33 (8.4) 0.09 (2.3)
MOUNTING
PLATE
;
MP
;
MT
0.144 HOLE
w/0.312 C' BORE
0.325
0.12
Options MP & MT
MP Metal inserts with 0.150” (3.8) dia. hole
accept
#6 screw. MT Metal inserts with tapped
hole accept #6-32 screw.
Bulk part numbers 1MP-J & 1MT-J.
Option DR
Counterbored holes across mount ends of
block enable fastening with two screws at
right angles to normal mount position.
Drilled Right Angle (A1 only)
Mounting Plates
0.320
0.450
0.150
0.250
0.04
Option AB
Angle brackets enable block to be fastened
at right angles to normal mount position.
Bulk part number 1AB-J.
Angle Brackets (A1 only)
Right Angle Bends (A1 only)
Right angle terminals are offered on the A1000 Series. Configurations are
defined in these dimensions: X = pin extension beyond the block base;
Z = length from block base to centerline of the terminal tip. Standard bends
consist of the X and Z dimensions shown in the chart. Specify by adding the
selected Bend Option Code to the terminal part number.
Dimensions in inches. To convert to millimeters, multiply by 25.4.
Terminal Blocks - Single Row
