Power Inductors - Shielded CTEP125HF Series From 1.0 H to 7.2 H Not shown at actual size. ctparts.com SPECIFICATIONS Parts are available in 20% only. * This indicates the value of current when the inductance is over 75% of the nominal value. Part Number Inductance (H 20%) L Test Freq. (kHz) CTEP125HF-1R0 CTEP125HF-1R8 CTEP125HF-2R8 CTEP125HF-4R0 CTEP125HF-5R6 CTEP125HF-7R2 1.0 1.8 2.8 4.0 5.6 7.2 100 100 100 100 100 100 DCR Max. ) (m *Current (A) 2.5 3.4 5.4 8.0 11.4 13.5 20 15.3 12.3 10.3 8.8 7.8 PHYSICAL DIMENSIONS RoHS Size Compliant A B C D E F G H 4.2.2 2.5.2 Max. mm inches 12.5.4 12.5.4 5.6 2.6.2 7.0.2 4.0.2 .50.02 .50.02 .22 .10.01 .28.01 .16.01 CHARACTERISTICS Description: SMD shielded power inductor Applications: Power supplies for VTR, OA equipment, LCD televisions, PC notebooks, portable communication equipment, DC/DC converters, etc. Operating Temperature: -30C to +100C Inductance Tolerance: 20% Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. PAD LAYOUT CENTRAL Technologies 09.19.06 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright (c) 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice 0.170.1 .10.01