Power Inductors - Shielded ctparts.com
Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids
800-684-5322 Inside US 949-453-1811 Outside US
Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved.
CT Magnetics reserves the right to make improvements or change specifications without notice
CENTRAL
Technologies
09.19.06
SPECIFICATIONS
Parts are available in ±20% only.
* This indicates the value of current when the inductance is over 75% of the nominal value.
L Test DCR
Part Inductance Freq. Max. *Current
Number (µH ±20%) (kHz) (mΩΩ) (A)
CTEP125HF-1R0 1.0 100 2.5 20
CTEP125HF-1R8 1.8 100 3.4 15.3
CTEP125HF-2R8 2.8 100 5.4 12.3
CTEP125HF-4R0 4.0 100 8.0 10.3
CTEP125HF-5R6 5.6 100 11.4 8.8
CTEP125HF-7R2 7.2 100 13.5 7.8
CTEP125HF Series
From 1.0 µH to 7.2 µH
Not shown at actual size.
CHARACTERISTICS
Description: SMD shielded power inductor
Applications: Power supplies for VTR, OA equipment, LCD
televisions, PC notebooks, portable communication equipment,
DC/DC converters, etc.
Operating Temperature: -30°C to +100°C
Inductance Tolerance: ±20%
Testing: Tested on a HP4285A at 100 KHz , 0.25Vrms , 0Adc
Packaging: Tape & Reel
Marking: Parts are marked with inductance code
Miscellaneous: RoHS Compliant.
Additional Information: Additional electrical & physical
information available upon request
Samples available. See website for ordering information.
PAD LAYOUT
Size A B C D E F G H
Max.
mm 12.5±.4 12.5±.4 5.6 2.6±.2 7.0±.2 4.0±.2 4.2±.2 2.5±.2
inches .50±.02 .50±.02 .22 .10±.01 .28±.01 .16±.01 0.17±0.1 .10±.01
PHYSICAL DIMENSIONS
RoHS
Compliant
