13465 - Desco - Datasheet.Directory

DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com

PHONE (909) 627-8178

DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407

PHONE (781) 821-8370

DRAWING

NUMBER

13405

DATE:

January

2018

Employee Owned

STATSHIELD® BAG, SHIELDING, METAL-IN, 0.0030" (0.0762mm)

Side Weld Seals 3/8 in. (±0.10)

Mixed Unsortable Plastic Scrap

Mixed unsortable plastic scrap shall contain assorted plastics

of multiple grades that are co-extruded, bonded or laminated

together which are unsortable into individual grades

Desco’s bags are recyclable

STATSHIELD® METAL-IN SERIES

Specifications:

Standard Document Meets Requirements of:

ANSI/ESD S541 (ANSI/ESD S20.20) ESD Protective Packaging

ANSI/ESD S11.4 Level 3 Technical Requirements

Electrical Properties Typical Values Test Procedures/Method

Surface Resistance:

Outer Surface 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11

Inner Surface 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11

Discharge Shielding <20 nJ ANSI/ESD STM11.31, EIA 541

Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane

Quartz: 0.01 nC/sq. in. Modified Incline Plane

Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV Discharge

Physical Properties

Film Thickness Nominal 0.0030" (0.0762mm) ±10% MIL-STD-3010, 1003

Width (Inside Dimensions) Nominal -0" / + 0.125"

Length (Inside Dimensions) Nominal ± 0.125"

Light Transmission >40% (Tobias) ASTM D-1003

Heat Seal >10 lbs/in 375°F, 1/2 sec 60 psi

Tensile Strength 4600 PSI, 32 MPa ASTM D882

Puncture Resistance >10 lbs MIL-STD-3010, 2065

Non-corrosive Pass MIL-STD-3010, M3005

Silicone Not detected FTIR

Marking Adhesion Pass IPC-TM-650 2.4.1

Low Charging Static

Dissipative Proprietary

Outer Polyester Layer

Aluminum Shielding Layer

Low Charging Static

Dissipative Proprietary

Inner Polyethylene Layer

Specications and procedures subject to change without notice.

Date & Lot Code

Printed for QC

Traceablility

Statshield® bags are packaged 100 per package in an oversized shielding bag.

See Shielding Bag Storage at TB-7057.

Statshield® and Statfree® are Registered Trademarks of Desco Industries Inc.

See Bag Selection Chart Click HERE.

ANSI/ESD S541 Section 6.2 Outside an EPA

“Transportation of sensitive products outside of an EPA shall require packaging that provides:

1. Low charge generation

2. Dissipative or conductive materials for intimate contact

3. A structure that provides electrostatic discharge shielding.”

Made in the

United States of America

Soft Fold Bottom

Weld

Seal

RoHS, REACH, and Conflict Minerals Statement:

See RoHS, REACH, and Conflict Minerals Statement at Desco.com.

Limited Warranty

See Desco’s Limited Warranty at Desco.com