Preliminary SDT6B2Q Semiconductor ESD Protection Diode Features * * * * Transient protection for data lines to IEC 61000-4-2(ESD) 15KV(air), 8KV(contact) Small package for use in portable electronics Protection one I/O or power line. Low leakage current Applications * ESD Protection Ordering Information Type NO. Marking SDT6B2Q W2 Package Code SOD-523 Outline Dimensions unit : mm 0.32 Max. 1.50~1.70 0.70~0.90 1.10~1.30 1 2 2 1 0.60~0.80 CATHODE MARK Preliminary 0.16 Max. 0.10 Max. PIN Connections 1. Anode 2. Cathode 1 Preliminary SDT6B2Q Absolute Maximum Ratings Characteristic (Ta=25C) Symbol Rating Unit Peak Pulse Power ( tp = 8/20 ) PPK 100 W Power dissipation PD 150 mW Junction temperature Tj 150 C Storage temperature range Tstg -55 ~ +150 C Operating temperature range Topr -55 ~ +150 C Electrical Characteristics Characteristic (Ta=25C) Symbol Test Condition Min. Typ. Max. Unit Zener voltage VZ IZ=1mA 5.7 - 6.7 V Reverse current IR VR=3.0V - - 1 Total capacitance CT VR=0V, f=1MHz - 20 - pF Preliminary 2 Preliminary SDT6B2Q Fig. 2 IR-VR Fig. 1 VZ-IZ Fig. 3 Cj-VR The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Preliminary 3