1.0GHz 2 Form C RELAY RA RELAYS (ARA) FEATURES 1. High frequency characteristics (Impedance 50, ~1.0GHz) * Insertion loss; Max. 0.3dB * Isolation; Min. 20dB (Between open contacts) Min. 30dB (Between contact sets) * V.S.W.R.; Max. 1.2 2. Surface mount terminal This relay is a surface-mounted model with excellent high-frequency properties. In addition, it can use a microstrip line in the base circuit design which spares the labor of machining the base. 9.7 .382 14.70 .579 5.9 .232 mm inch 3. Low profile small type 9.7(W)x14.7(L)x5.9(H) mm .382(W)x.579(L)x.232(H) inch 4. High sensitivity: 140 mW nominal operating power 5. High contact reliability Electrical life: Min. 107 (10mA 10V DC) TYPICAL APPLICATIONS * Measurement instruments Oscilloscope attenuator circuit SPECIFICATIONS Contact Characteristics Arrangement Contact material Initial contact resistance 2 Form C Gold-clad silver alloy Max. 75m Contact rating (resistive) Rating Contact carrying power Max. switching voltage Max. switching current Isolation High frequency characteristics (~1GHz, Insertion loss Impedance V.S.W.R. 50) Between open contacts Between contact sets Input power Single side stable Nominal operating power 1 coil latching 2 coil latching Mechanical (at 180 cpm) Expected life (min. operation) 10mA 10 V DC (resistive load) Electrical (at 20 cpm) 1A 30 V DC (resistive load) 10mA 10 V DC 1A 30 V DC Max. 3W (at 1.0GHz, impedance 50, V.S.W.R. max.1.2) 30 V DC 1A Min. 20dB Min. 30dB Max. 0.3dB Max. 1.2 Max. 3W (at 1.0GHz, impedance 50, V.S.W.R. max.1.2) 140mW (1.5 to 12V) 200mW (24V) 300mW (48V) 70 mW (1.5 to 12V) 100mW (24V) 140mW (1.5 to 12V) 200mW (24V) 108 107 105 Initial insulation resistance *1 Between open contacts Between contact sets Initial breakdown Between contact and coil voltage *2 Between contact and earth terminal Operate time [Set time] *3 (at 20C) Release time (without diode) [Reset time] *3 (at 20C) Temperature rise (at 20C) *4 Functional *5 Shock resistance Destructive *6 Functional *7 Vibration resistance Destructive Conditions for operation, transport and storage *8 Ambient temp (Not freezing and condensing at low Humidity temperature) Unit weight Min. 100 M (at 500 V DC) 750 Vrms for 1 min. 1,000 Vrms for 1 min. 1,000 Vrms for 1 min. 1,000 Vrms for 1 min. Max. 4ms (Approx. 2ms) [Max. 4ms (Approx. 2ms)] Max. 4ms (Approx. 1ms) [Max. 4ms (Approx. 2ms)] Max. 60C Min. 500 m/s2 Min. 1,000 m/s2 10 to 55 Hz at double amplitude of 3mm 10 to 55 Hz at double amplitude of 5mm -40C to +85C -40F to +185F 5 to 85% R.H. Approx. 2g .07oz Remarks * *1 *2 *3 *4 *5 *6 *7 *8 Specifications will vary with foreign standards certification ratings. Measurement at same location as "Initial breakdown voltage" section. Detection current: 10mA Nominal operating voltage applied to the coil, excluding contact bounce time. By resistive method, nominal voltage applied to the coil: 3W contact carrying power: at 1.0GHz, Impedance 50, V.S.W.R. Max.1.2 Half-wave pulse of sine wave: 11ms, detection time: 10s. Half-wave pulse of sine wave: 6ms Detection time: 10s Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. RA (ARA) ORDERING INFORMATION Ex. A RA 2 0 0 A 03 Product name Contact arrangement Operating function Type of operation Terminal shape RA 2: 2 Form C 0: Single side stable 0: Standard 1: 1 coil latching type 2: 2 coil latching (B.B.M) Coil voltage, V DC Packing style A: Surface-mount terminal Nil: Tube packing 1H: 1.5 09: 9 03: 3 12: 12 X: Tape and reel packing (picked from 1/2/3 pin side) 4H: 4.5 24: 24 Z: Tape and reel packing 05: 5 48: 48 (picked from 8/9/10 pin side) 06: 6 Note: Packing style; Nil: Tube packing 40 pcs. in an inner package, 1,000 pcs. in an outer package Z: Tape and reel packing 500 pcs. in an inner package, 1,000 pcs. in an outer package TYPES ANE COIL DATA (at 20C 68F) * Single side stable type Part No. Nominal voltage, V DC Pick-up voltage, V DC (max.) (initial) Drop-out voltage, V DC (min.)(initial) Coil resistance, (10%) ARA200A1H(Z) ARA200A03(Z) ARA200A4H(Z) ARA200A05(Z) ARA200A06(Z) ARA200A09(Z) ARA200A12(Z) ARA200A24(Z) ARA200A48(Z) 1.5 3 4.5 5 6 9 12 24 48 1.125 2.25 3.375 3.75 4.5 6.75 9 18 36 0.15 0.3 0.45 0.5 0.6 0.9 1.2 2.4 4.8 16 64.3 145 178 257 579 1,028 2,880 7,680 Part No. Nominal voltage, V DC Set voltage, V DC (max.) (initial) Reset voltage, V DC (max.) (initial) Coil resistance, (10%) ARA210A1H(Z) ARA210A03(Z) ARA210A4H(Z) ARA210A05(Z) ARA210A06(Z) ARA210A09(Z) ARA210A12(Z) ARA210A24(Z) 1.5 3 4.5 5 6 9 12 24 1.125 2.25 3.375 3.75 4.5 6.75 9 18 1.125 2.25 3.375 3.75 4.5 6.75 9 18 32 128.6 289.3 357 514 1,157 2,057 5,760 Part No. Nominal voltage, V DC Set voltage, V DC (max.) (initial) Reset voltage, V DC (max.) (initial) Coil resistance, (10%) ARA220A1H(Z) ARA220A03(Z) ARA220A4H(Z) ARA220A05(Z) ARA220A06(Z) ARA220A09(Z) ARA220A12(Z) ARA220A24(Z) 1.5 3 4.5 5 6 9 12 24 1.125 2.25 3.375 3.75 4.5 6.75 9 18 1.125 2.25 3.375 3.75 4.5 6.75 9 18 16 64.3 145 178 257 579 1,028 2,880 Nominal operating current, mA (10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 6.3 Nominal operating power, mW Max. allowable voltage, V DC 140 140 140 140 140 140 140 200 300 2.25 4.5 6.75 7.5 9 13.5 18 36 57.6 Nominal operating power, mW Max. allowable voltage, V DC 70 70 70 70 70 70 70 100 2.25 4.5 6.75 7.5 9 13.5 18 36 Nominal operating power, mW Max. allowable voltage, V DC 140 140 140 140 140 140 140 200 2.25 4.5 6.75 7.5 9 13.5 18 36 * 1 coil latching type Nominal operating current, mA (10%) 46.9 23.3 15.6 14 11.7 7.8 5.8 4.2 * 2 coil latching type Nominal operating current, mA (10%) 93.8 46.7 31 28.1 23.3 15.5 11.7 8.3 All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. RA (ARA) DIMENSIONS mm inch Suggested Mounting Pads (Top view) Single side stable A (S = 20:1) 1.0 .039 14.30 .563 12.90 .508 2.94 .116 A 0.50 .020 7.62 .300 11.50.5 .453.020 8.90 9.56 .350 .376 12.50 .492 for glue pad 2.00 .079 12.40 .488 14.90 .587 5.90 .232 2.54 .100 2.54 .100 2.0 .079 0.3 .012 Coplanarity of terminals & ribs Max. 0.20 .008 9.70 .382 14.70 .579 Soldering with PC board earth (4 ribs) 14.0 .551 earth 1 coil latching 0.25 .010 1.0 .039 14.0 .551 2.94 .116 Tolerance: 0.3 .012 2.54 .100 2.0 .079 8.90 9.56 .350 .376 12.50 .492 0.3 .012 Single side stable Schematic (Top view) 1 coil latching for glue pad 2.00 .079 12.40 .488 14.90 .587 2 coil latching 10 9 8 7 6 10 9 8 7 6 10 9 8 7 6 1 2 3 4 5 1 2 3 4 5 1 2 3 4 5 2 coil latching Direction indication (Deenergized condition) (Reset condition) earth 2.54 .100 (Reset condition) 14.0 .551 1.0 .039 2.0 .079 9.56 .376 2.94 8.90 12.50 .116 .350 .492 0.3 .012 for glue pad 2.00 .079 14.90 .587 earth Tolerance: 0.1 .004 REFERENCE DATA 1-(1). High frequency characteristics (Impedance 50) Sample: ARA200A12 Measuring method: Measured with HP network analyzer (HP8753C). * V.S.W.R. * Insertion loss 1.5 0 1.4 0.2 * Isolation 0 COM-NO 1.3 1.2 0.3 0.4 20 Isolation, dB Insertion loss, dB V.S.W.R. COM-NC COM-NC 30 40 0.6 60 0.8 80 COM-NO CONTACT sets COM-NC 1.1 COM-NO 1.0 300kHz 0.5GHz Frequency 1.0GHz 1.0 300kHz 0.5GHz Frequency 1.0GHz All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. 100 300kHz 0.5GHz Frequency 1.0GHz RA (ARA) 1-(2). High frequency characteristics (Impedance 75) Sample: ARA200A12 Measuring method: Measured with HP network analyzer (HP8753C). * V.S.W.R. * Insertion loss 1.5 0 0.2 20 1.3 COM-NO 1.2 1.1 0.5GHz Frequency 1.0GHz Isolation, dB Insertion loss, dB COM-NC V.S.W.R. 0 COM-NC 1.4 1.0 300kHz * Isolation 0.4 30 40 0.6 60 0.8 80 1.0 300kHz 0.5GHz 1.0GHz 100 300kHz Frequency All Rights Reserved (c) COPYRIGHT Matsushita Electric Works, Ltd. COM-NO CONTACT sets 0.5GHz Frequency 1.0GHz