RA RELAYS
(ARA)
1.0GHz 2 Form C RELAY
9.7
.382
5.9
.232
14.70
.579
mm inch
FEATURES
1. High frequency characteristics
(Impedance 50
Ω
, ~1.0GHz)
• Insertion loss; Max. 0.3dB
• Isolation; Min. 20dB
(Between open contacts)
Min. 30dB
(Between contact sets)
• V.S.W.R.; Max. 1.2
2. Surface mount terminal
This relay is a surface-mounted model
with excellent high-frequency properties.
In addition, it can use a microstrip line in
the base circuit design which spares the
labor of machining the base.
3. Low profile small type
9.7(W)
×
14.7(L)
×
5.9(H) mm
.382(W)
×
.579(L)
×
.232(H) inch
4. High sensitivity: 140 mW nominal
operating power
5. High contact reliability
Electrical life: Min. 10
7
(10mA 10V DC)
TYPICAL APPLICATIONS
• Measurement instruments
Oscilloscope attenuator circuit
SPECIFICATIONS
Contact Characteristics
Remarks
* Specifications will vary with foreign standards certification ratings.
*
1
Measurement at same location as “Initial breakdown voltage” section.
*
2
Detection current: 10mA
*
3
Nominal operating voltage applied to the coil, excluding contact bounce time.
*
4
By resistive method, nominal voltage applied to the coil: 3W contact carrying
power: at 1.0GHz, Impedance 50
Ω
, V.S.W.R. Max.1.2
*
5
Half-wave pulse of sine wave: 11ms, detection time: 10
µ
s.
*
6
Half-wave pulse of sine wave: 6ms
*
7
Detection time: 10
µ
s
*
8
Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT.
Arrangement 2 Form C
Contact material Gold-clad silver alloy
Initial contact resistance Max. 75m
Ω
Rating
Contact rating (resistive) 10mA 10 V DC
1A 30 V DC
Contact carrying power
Max. 3W (at 1.0GHz,
impedance 50
Ω
,
V.S.W.R. max.1.2)
Max. switching voltage 30 V DC
Max. switching current 1A
High frequency
characteristics
(~1GHz,
Impedance
50
Ω
)
Isolation
Between open
contacts Min. 20dB
Between
contact sets Min. 30dB
Insertion loss Max. 0.3dB
V.S.W.R. Max. 1.2
Input power
Max. 3W (at 1.0GHz,
impedance 50
Ω
,
V.S.W.R. max.1.2)
Nominal
operating
power
Single side stable
140mW (1.5 to 12V)
200mW (24V)
300mW (48V)
1 coil latching 70 mW (1.5 to 12V)
100mW (24V)
2 coil latching 140mW (1.5 to 12V)
200mW (24V)
Expected life
(min.
operation)
Mechanical (at 180 cpm) 10
8
Electrical
(at 20 cpm)
10mA 10 V DC
(resistive load) 10
7
1A 30 V DC
(resistive load) 10
5
Initial insulation resistance *
1
Min. 100 M
Ω
(at 500 V DC)
Initial
breakdown
voltage *
2
Between open contacts 750 Vrms for 1 min.
Between contact sets 1,000 Vrms for 1 min.
Between contact and coil 1,000 Vrms for 1 min.
Between contact and earth
terminal 1,000 Vrms for 1 min.
Operate time [Set time] *
3
(at 20°C) Max. 4ms (Approx. 2ms)
[Max. 4ms (Approx. 2ms)]
Release time (without diode)
[Reset time] *
3
(at 20°C)
Max. 4ms (Approx. 1ms)
[Max. 4ms (Approx. 2ms)]
Temperature rise (at 20°C) *
4
Max. 60°C
Shock resistance Functional *
5
Min. 500 m/s
2
Destructive *
6
Min. 1,000 m/s
2
Vibration resistance
Functional *
7
10 to 55 Hz at double
amplitude of 3mm
Destructive 10 to 55 Hz at double
amplitude of 5mm
Conditions for operation,
transport and storage *
8
(Not freezing and
condensing at low
temperature)
Ambient temp –40°C to +85°C
–40°F to +185°F
Humidity 5 to 85% R.H.
Unit weight Approx. 2g .07oz
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
RA (ARA)
ORDERING INFORMATION
00A 032AEx.
Operating function
0: Single side stable
1: 1 coil latching
2: 2 coil latching
Contact arrangement
2: 2 Form C
RA
Product name
RA
Note: Packing style; Nil: Tube packing 40 pcs. in an inner package, 1,000 pcs. in an outer package
Z: Tape and reel packing 500 pcs. in an inner package, 1,000 pcs. in an outer package
0: Standard
type
(B.B.M)
A: Surface-mount
terminal
Type of operation
Terminal shape
1H: 1.5
03: 3
4H: 4.5
05: 5
06: 6
09: 9
12: 12
24: 24
48: 48
Coil voltage, V DC
Tube packing
Tape and reel packing
(picked from 1/2/3 pin side)
Tape and reel packing
(picked from 8/9/10 pin side)
Nil:
X:
Z:
Packing style
TYPES ANE COIL DATA (at 20°C 68°F)
• Single side stable type
• 1 coil latching type
• 2 coil latching type
Part No.
Nominal
voltage,
V DC
Pick-up voltage,
V DC (max.)
(initial)
Drop-out
voltage, V DC
(min.)(initial)
Coil resistance,
Ω
(±10%)
Nominal
operating
current, mA
(±10%)
Nominal
operating power,
mW
Max. allowable
voltage, V DC
ARA200A1H(Z) 1.5 1.125 0.15 16 93.8 140 2.25
ARA200A03(Z) 3 2.25 0.3 64.3 46.7 140 4.5
ARA200A4H(Z) 4.5 3.375 0.45 145 31 140 6.75
ARA200A05(Z) 5 3.75 0.5 178 28.1 140 7.5
ARA200A06(Z) 6 4.5 0.6 257 23.3 140 9
ARA200A09(Z) 9 6.75 0.9 579 15.5 140 13.5
ARA200A12(Z) 12 9 1.2 1,028 11.7 140 18
ARA200A24(Z) 24 18 2.4 2,880 8.3 200 36
ARA200A48(Z) 48 36 4.8 7,680 6.3 300 57.6
Part No.
Nominal
voltage,
V DC
Set voltage,
V DC (max.)
(initial)
Reset voltage,
V DC (max.)
(initial)
Coil resistance,
Ω
(±10%)
Nominal
operating
current, mA
(±10%)
Nominal
operating power,
mW
Max. allowable
voltage, V DC
ARA210A1H(Z) 1.5 1.125 1.125 32 46.9 70 2.25
ARA210A03(Z) 3 2.25 2.25 128.6 23.3 70 4.5
ARA210A4H(Z) 4.5 3.375 3.375 289.3 15.6 70 6.75
ARA210A05(Z) 5 3.75 3.75 357 14 70 7.5
ARA210A06(Z) 6 4.5 4.5 514 11.7 70 9
ARA210A09(Z) 9 6.75 6.75 1,157 7.8 70 13.5
ARA210A12(Z) 12 9 9 2,057 5.8 70 18
ARA210A24(Z) 24 18 18 5,760 4.2 100 36
Part No.
Nominal
voltage,
V DC
Set voltage,
V DC (max.)
(initial)
Reset voltage,
V DC (max.)
(initial)
Coil resistance,
Ω
(±10%)
Nominal
operating
current, mA
(±10%)
Nominal
operating power,
mW
Max. allowable
voltage, V DC
ARA220A1H(Z) 1.5 1.125 1.125 16 93.8 140 2.25
ARA220A03(Z) 3 2.25 2.25 64.3 46.7 140 4.5
ARA220A4H(Z) 4.5 3.375 3.375 145 31 140 6.75
ARA220A05(Z) 5 3.75 3.75 178 28.1 140 7.5
ARA220A06(Z) 6 4.5 4.5 257 23.3 140 9
ARA220A09(Z) 9 6.75 6.75 579 15.5 140 13.5
ARA220A12(Z) 12 9 9 1,028 11.7 140 18
ARA220A24(Z) 24 18 18 2,880 8.3 200 36
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
RA (ARA)
DIMENSIONS
Tolerance: ±0.3 ±.012
A
A (S = 20:1)
Coplanarity of
terminals & ribs
Max. 0.20 .008
9.70
.382
0.25
.010
12.90
.508
14.30
.563
Soldering with
PC board earth
(4 ribs)
14.70
.579
2.54
.100
0.50
.020
5.90
.232
7.62
.300
11.5±0.5
.453±.020
Suggested Mounting Pads (Top view)
Single side stable
1 coil latching
2 coil latching
Tolerance: ±0.1 ±.004
earth
2.54
.100
1.0
.039
2.94
.116
0.3
.012
2.00
.079
2.0
.079
for glue pad
14.0
.551
12.40
.488
14.90
.587
8.90
.350
9.56
.376 12.50
.492
earth
2.54
.100
1.0
.039
2.94
.116
0.3
.012
2.00
.079
2.0
.079
for glue pad
14.0
.551
12.40
.488
14.90
.587
8.90
.350
9.56
.376 12.50
.492
earth
1.0
.039
2.54
.100
2.94
.116
0.3
.012
2.00
.079
2.0
.079
for glue pad
14.0
.551
14.90
.587
8.90
.350
9.56
.376 12.50
.492
Schematic (Top view)
Single side stable 1 coil latching 2 coil latching
(Deenergized condition) (Reset condition) (Reset condition)
12345
678910
Direction indication
12345
678910
1
01
2345
6789
mm inch
REFERENCE DATA
1-(1). High frequency characteristics (Impedance 50
Ω
)
Sample: ARA200A12
Measuring method: Measured with HP network analyzer (HP8753C).
• V.S.W.R. • Insertion loss • Isolation
1.1
1.0
1.5
1.4
1.2
1.3
300kHz 0.5GHz 1.0GHz
COM-NO
COM-NC
Frequency
V.S.W.R.
0.8
1.0
0
0.2
0.6
0.4
0.3
300kHz 0.5GHz 1.0GHz
COM-NC
COM-NO
Insertion loss, dB
Frequency
80
100
0
20
30
60
40
300kHz 0.5GHz 1.0GHz
COM-NC
COM-NO
CONTACT sets
Isolation, dB
Frequency
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
RA (ARA)
1-(2). High frequency characteristics (Impedance 75
Ω
)
Sample: ARA200A12
Measuring method: Measured with HP network analyzer (HP8753C).
• V.S.W.R. • Insertion loss • Isolation
COM-NC
COM-NO
1.0
Frequency
1.2
1.4
1.1
1.3
1.5
300kHz 0.5GHz 1.0GHz
V.S.W.R.
1.0
Frequency
0.6
0.2
0.8
0.4
0
300kHz 0.5GHz 1.0GHz
Insertion loss, dB
80
100
0
20
30
60
40
300kHz 0.5GHz 1.0GHz
COM-NC
COM-NO
CONTACT sets
Isolation, dB
Frequency
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
