STE www.vishay.com Vishay SuperTan(R) Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES Vishay SuperTan(R) Extended (STE) represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode system, also used in the ST, provides the highest capacitance per Available unit volume available. The STE combines the inherent reliability of wet tantalum with the capacitance stability of solid tantalum, and there are no circuit impedance restrictions. The range is exceptionally well suited for low voltage filtering and energy storage applications. Ideal for designs targeting the military and aerospace industry. The SuperTan(R) Extended (STE) is housed in an all tantalum, hermetically sealed case and is manufactured to withstand high stress and hazardous environments. * Axial through-hole terminations: standard tin / lead (Sn / Pb), 100 % tin (RoHS-compliant) available * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +85 C (to +125 C with voltage derating) DC Leakage Current (DCL Max.): at +25 C and above: leakage current shall not exceed the values listed in the Standard Ratings tables. Capacitance Tolerance: at 120 Hz, +25 C. 20 % standard. 10 % available as special. Life Test: capacitors are capable of withstanding a 2000 h life test at a temperature of +85 C at the applicable rated DC working voltage. ORDERING INFORMATION STE 6000 16 T4 M I E3 TYPE CAPACITANCE F DC VOLTAGE RATING AT +85 C CASE SIZE CAPACITANCE TOLERANCE INSULATING SLEEVE RoHS COMPLIANT M = 20 % K = 10 % I = insulated X = uninsulated E3 = 100 % tin termination (RoHS compliant) Blank = SnPb termination (standard design) Note * Packaging: the use of formed plastic trays for packaging this type of axial lead component is standard. Tape and reel is not recommended due to the unit weight. Revision: 25-Jun-2018 Document Number: 43009 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STE www.vishay.com Vishay DIMENSIONS in inches [millimeters] Terminal Welded to Case 0.0253 0.002 [0.64 0.05] dia. (no. 22 AWG) tinned nickel leads solderable and weldable 0.250 (6.35) Max. 0.094 (2.38) Max. L1 E Terminal Location within 0.031 of Center "D" Dia. E CASE CODE D 0.016 [0.41] MAX. INSULATED (DIA.) L1 + 0.031 / - 0.016 [+ 0.79 / - 0.41] UNINSULATED E 0.250 [6.35] MAX. T1 0.188 [4.78] 0.219 [5.56] 0.453 [11.51] 1.500 [38.10] T2 0.281 [7.14] 0.312 [7.92] 0.641 [16.28] 2.250 [57.15] T3 0.375 [9.52] 0.406 [10.31] 0.766 [19.46] 2.250 [57.15] T4 0.375 [9.52] 0.406 [10.31] 1.062 [26.97] 2.250 [57.15] Notes * Material at egress is tantalum * Insulation sleeving will lap over the ends of the capacitor case * Approx. weight: T1: 2.3 g, T2: 5.7 g T3: 9.4 g, T4: 14.8 g STANDARD RATINGS CAPACITANCE CASE VOLTAGE (F) CODE PART NUMBER TYP. MAX. DCL AT MAX. ESR AT ESR AT +25 C +25 C +85 C / 120 Hz 1 kHz +25 C +125 C (A) () () (A) MAX. CAPACITANCE CHANGE AT -55 C (%) +85 C (%) AC MAX. RIPPLE IMP. AT 85 C -55 C +125 C 120 Hz 40 kHz mA (%) () RMS 10 VDC AT +85 C; 7 VDC AT +125 C 680 10 T1 2000 10 T2 Preliminary value, contact marketing 4700 10 T3 STE4700-10T3MI 0.35 < 0.200 16 100 -80 10 20 3.50 4000 10 000 10 T4 STE10000-10T4MI 0.25 < 0.100 25 150 -85 20 35 3.00 5000 Preliminary value, contact marketing 16 VDC AT +85 C; 11 VDC AT +125 C 430 16 T1 Preliminary value, contact marketing 1200 16 T2 3300 16 T3 STE3300-16T3MI 0.35 < 0.200 Preliminary value, contact marketing 16 100 -80 10 15 3.50 4000 6000 16 T4 STE6000-16T4MI 0.30 < 0.150 25 150 -80 15 20 3.00 4500 270 25 T1 Preliminary value, contact marketing 1000 25 T2 Preliminary value, contact marketing 2200 25 T3 4000 25 T4 20 5.00 4250 20 20.00 1650 25 4.00 2750 20 16.00 2500 30 4.50 4000 25 VDC AT +85 C; 15 VDC AT +125 C Preliminary value, contact marketing STE4000-25T4MI 0.35 < 0.150 25 125 -80 15 30 VDC AT +85 C; 20 VDC AT +125 C 220 30 T1 820 30 T2 1800 30 T3 3300 30 T4 Preliminary value, contact marketing STE820-30T2MI 1.00 < 0.600 3.5 18 -75 12 Preliminary value, contact marketing STE3300-30T4MI 0.35 < 0.200 25 125 -80 20 35 VDC AT +85 C; 22 VDC AT +125 C 180 35 T1 680 35 T2 1500 35 T3 2800 35 T4 Revision: 25-Jun-2018 Preliminary value, contact marketing STE680-35T2MI 0.95 < 0.500 5 25 -75 16 Preliminary value, contact marketing STE2800-35T4MI 0.35 < 0.200 25 125 -80 20 Document Number: 43009 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STE www.vishay.com Vishay STANDARD RATINGS CAPACITANCE CASE VOLTAGE (F) CODE PART NUMBER TYP. MAX. DCL AT MAX. ESR AT ESR AT +25 C +25 C +85 C / 120 Hz 1 kHz +25 C +125 C (A) () () (A) MAX. CAPACITANCE CHANGE AT -55 C (%) +85 C (%) AC MAX. RIPPLE IMP. AT 85 C -55 C +125 C 120 Hz 40 kHz mA (%) () RMS 50 VDC AT +85 C; 30 VDC AT +125 C 110 50 T1 STE110-50T1MI 1.60 < 1.000 2 7.5 -40 10 15 40.00 1500 470 50 T2 STE470-50T2MI 0.90 < 0.600 5 50 -60 8 12 12.00 2000 520 50 T2 STE520-50T2MI 1.00 < 0.600 3 15 -80 12 18 20.00 1700 900 50 T3 STE900-50T3MI 0.90 < 0.300 15 125 -75 20 20 10.00 2500 1500 50 T3 STE1500-50T3MI 1.00 < 0.300 25 130 -85 25 30 8.00 2400 1500 50 T4 STE1500-50T4MI 0.35 < 0.215 15 110 -70 20 20 6.00 3500 2200 50 T4 STE2200-50T4MI 0.60 < 0.400 25 125 -80 25 30 4.50 3000 68 60 T1 STE68-60T1MI 1.50 < 0.600 -30 10 12 40.00 1400 220 60 T2 560 60 T3 STE560-60T3MI 0.90 < 0.300 20 120 -70 12 15 10.00 2500 1000 60 T4 STE1000-60T4MI 0.50 < 0.300 20 120 -40 10 15 5.50 3500 60 VDC AT +85 C; 40 VDC AT +125 C 1.5 7.5 Preliminary value, contact marketing 75 VDC AT +85 C; 50 VDC AT +125 C 56 75 T1 STE56-75T1MI 1.60 < 0.800 1.5 7.5 -30 8 10 40.00 1750 180 75 T2 STE180-75T2MI 1.50 < 0.500 5 25 -35 15 20 30.00 2000 470 75 T3 STE470-75T3MI 0.60 < 0.325 25 100 -45 10 25 10.00 3000 750 75 T4 STE750-75T4MI 0.50 < 0.400 20 120 -35 10 15 6.50 3500 -15 4 10 100.00 1200 100 VDC AT +85 C; 65 VDC AT +125 C 22 100 T1 86 100 T2 STE22-100T1MI 3.00 < 1.500 1 5 Preliminary value, contact marketing 220 100 T3 STE220-100T3MI 1.40 < 0.200 5 25 -55 10 15 18.00 2500 400 100 T4 STE400-100T4MI 0.70 < 0.400 10 120 -40 6 12 15.00 3000 18 125 T1 Preliminary value, contact marketing 12 20.00 2500 125 VDC AT +85 C; 85 VDC AT +125 C 56 125 T2 Preliminary value, contact marketing 150 125 T3 Preliminary value, contact marketing 240 125 T4 Revision: 25-Jun-2018 STE240-125T4MI 0.80 < 0.600 15 150 -35 6 Document Number: 43009 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STE www.vishay.com Vishay TYPICAL PERFORMANCE CHARACTERISTICS OF STE CAPACITORS ELECTRICAL CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Operating temperature range -55 C to +85 C (to +125 C with voltage derating) Capacitor tolerance 20 %, 10 % at 120 Hz, at +25 C Capacitor change by temperature Limit per Standard Ratings table ESR Limit per Standard Ratings table, at +25 C, 120 Hz Impedance Limit per Standard Ratings table, at -55 C, 120 Hz DCL (leakage current) Limit per Standard Ratings table AC ripple current Limit per Standard Ratings table, at +85 C and 40 kHz Reverse voltage There shall be no continuous reverse voltage. Transient reverse voltage surges are acceptable under the following conditions: a) The peak reverse voltage is equal to or less than 1.5 V and the product of the peak current times the duration of the reverse transient is 0.05 As or less b) The repetition rate of the reverse voltage surges is less than 10 Hz Surge voltage Surge voltage shall be in accordance with MIL-PRF-39006 and Table I of DLA 10004. The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under any conditions including transients and peak ripple at the highest line voltage. The DC surge voltage is 115 % of rated DC voltage. PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Life testing Capacitors shall be capable of withstanding a 2000 h life test at a temperature +85 C at rated voltage, or a 2000 h life test at 125 C test at derated voltage. After the test, the capacitors shall meet the following requirements: a) DC leakage at 85 C and 125 C shall not exceed 125 % of the specified value b) DC leakage at 25 C shall not exceed the specified value c) Capacitance shall be within +10 %, -20 % of initial value d) ESR shall not exceed 200 % of the specified value ENVIRONMENTAL CHARACTERISTICS ITEM CONDITION COMMENTS Seal MIL-PRF-39006 When the capacitors are tested as specified in MIL-PRF-39006, there shall be no evidence of leakage. Moisture resistance MIL-PRF-39006 Moisture resistance shall be in accordance with MIL-PRF-39006. Number of cycles: 10 continuous cycles Barometric pressure (reduced) MIL-STD-202, method 105, condition E Altitude 150 000 feet Revision: 25-Jun-2018 Document Number: 43009 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STE www.vishay.com Vishay MECHANICAL CHARACTERISTICS ITEM CONDITION COMMENTS Shock (specified pulse) MIL-STD-202, method 213, condition I (100 g) The capacitors shall meet the requirements of MIL-PRF-39006. Vibration, high frequency MIL-STD-202, method 204, condition D (20 g peak) The capacitors shall meet the requirements of MIL-PRF-39006. Thermal shock MIL-STD-202, method 107, condition A Thermal shock shall be in accordance with MIL-PRF-39006 when tested for 30 cycles. Solderability MIL-STD-202, method 208, ANSI/J-STD-002, test A Solderability shall be in accordance with MIL-PRF-39006. Terminal strength MIL-STD-202, method 211 Terminal strength shall be in accordance with MIL-PRF-39006. Resistance to solder heat MIL-STD-202, method 210, condition C The capacitors shall meet the requirements of MIL-PRF-39006. Terminals MIL-STD-1276 Terminals shall be as specified in MIL-STD-1276. The length and diameter of the terminals shall be as specified in Dimensions table. All terminals shall be permanently secured internally and externally, as applicable. All external joints shall be welded. Marking MIL-STD-1285 Marking of capacitors conforms to method I of MIL-STD-1285 and include capacitance (in F), capacitance tolerance letter, rated voltage, date code, lot symbol and Vishay trademark. SELECTOR GUIDES Tantalum Selector Guide www.vishay.com/doc?49054 Parameter Comparison Guide www.vishay.com/doc?42088 Revision: 25-Jun-2018 Document Number: 43009 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: STE750-75T4KI STE1000-60T4MI STE750-75T4MI STE2200-50T4KI STE2800-35T4MI STE6000-16T4MI STE3300-16T3MI STE4700-10T3KI STE400-100T4MI STE10000-10T4MI STE180-75T2KI STE2200-50T4MI