Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com

Customer Specification

PART NO. 77238

Diameters (In)

1) Component 1 25 X 1 COND

a) Conductor 14 (41/30) AWG Tinned Copper 0.070

3 RED 12 WHITE/BROWN 21 WHITE/BLACK/RED

4 ORANGE 13 WHITE/RED 22

5 YELLOW 14 WHITE/ORANGE 23

6 GREEN 15 WHITE/YELLOW 24

b) Core Wrap Nonwoven Polyester Tape, 25% Overlap, Min.

3) Shield: A/P/A Tape, 25% Overlap, Min.

a) Drain Wire 16 (19/.0117) AWG Tinned Copper

b) Braid Tinned Copper,70% Coverage, Min.

4) Jacket 0.053" Wall, Nom.,MPPE 0.720 (0.745 Max.)

a) Color(s) SLATE

b) Ripcord 1 End 810 Denier Nylon

c) Print

ALPHA WIRE-* P/N 77238 25C 14 AWG

ECOCABLE(R) RU AWM 21915 105C 600V

C(RU) AWM I/II A/B FT2 600V 105C

Horizontal Flame

2) CSA International C(RU) AWM I/II A/B FT2 105°C / 600 VRMS

3) Other Halogen-Free

4) CE: EU Low Voltage Directive 2006/95/EC

1) CE: EU Directive 2011/65/EU(RoHS2):

This product complies with European Directive 2011/65/EU (RoHS Directive) of the European

Parliament and of the Council of 8 June 2011. No Exemptions are required for RoHS

Compliance on this item. Consult Alpha Wire's web site for RoHS C of C.

2) REACH Regulation (EC 1907/2006):

Physical & Mechanical Properties

1) Temperature Range -50 to 105°C

2) Bend Radius 6X Cable Diameter

3) Pull Tension 840 Lbs, Maximum

Electrical Properties (For Engineering purposes only)

1) Voltage Rating 600 VRMS

2) Capacitance 34 pf/ft @1 kHz, Nominal Conductor to Conductor

3) Ground Capacitance 61 pf/ft @1 kHz, Nominal

4) Inductance 0.15 µH/ft, Nominal

5) Conductor DCR 2.8 Ω/1000ft @20°C, Nominal

Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207

Tel: 1-800-52 ALPHA (25742)

Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications

described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not

ensure product availability.

Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or

implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,

even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out

of or in connection with the use, or inability to use, the information or specifications described herein.

EU/China ROHS CERTIFICATE OF COMPLIANCE

To Whom It May Concern:

Alpha Wire Part Number: 77238

77238 , RoHS-Compliant Commencing With 10/15/2012 Production

This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European

Parliament, better known as the RoHS Directive, with regards to restrictions of the use of certain hazardous substances used in the manufacture of

electrical and electronic equipment. The reader is referred to this Directive for the specific definitions and extents of this Directive. No Exemptions

are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS “Marking

for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2006.

Substance Maximum Control Value

Including Deca-BDE 0.1% by weight (1000 ppm)

The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its

release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or

the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is

for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual

usage of the product.

Authorized Signatory for the Alpha Wire Company:

Dave Watson, Director of Engineering & QA 8/6/2015

Alpha Wire

711 Lidgerwood Ave.