LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 1Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 x 2 Character LCD
FEATURES
• Type: character
• Display format: 16 x 2 characters
• Built-in controller: ST7066U (or equivalent)
• Duty cycle: 1/16
• 5 x 8 dots includes cursor
• + 5 V power supply
• LED can be driven by pin 1, pin 2, or A and K
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
•V
SS = 0 V, VDD = 5.0 V
MECHANICAL DATA
ITEM STANDARD VALUE UNIT
Module Dimension 80.0 x 36.0 x 13.2 (max.)
mm
Viewing Area 66.0 x 16.0
Dot Size 0.55 x 0.65
Dot Pitch 0.60 x 0.70
Mounting Hole 75.0 x 31.0
Character Size 2.95 x 5.55
ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL
STANDARD VALUE
UNIT
MIN. TYP. MAX.
Power Supply VDD to VSS -0.3 - 7 V
Input Voltage VIVSS -V
DD
ELECTRICAL CHARACTERISTICS
ITEM SYMBOL CONDITION
STANDARD VALUE
UNIT
MIN. TYP. MAX.
Input Voltage VDD VDD = + 5 V 4.5 5.0 5.5 V
Supply Current IDD VDD = + 5 V 1.0 1.2 1.5 mA
Recommended LC Driving
Voltage for Normal Temperature
Version Module
VDD to V0
- 20 °C - - 5.2
V
0 °C - - -
25 °C 3.6 3.7 3.8
50 °C - - -
70 °C 3.2 - -
LED Forward Voltage VF25 °C 3.9 4.1 4.3 V
LED Forward Current IFV = 4.1 V 117 130 156 mA
EL Power Supply Current IEL VEL = 110 VAC, 400 Hz - - 5.0 mA
DISPLAY CHARACTER ADDRESS CODE
Display Position
12345678910111213141516
DD RAM Address 000102030405060708090A0B0C0D0E0F
DD RAM Address 404142434445464748494A4B4C4D4E4F
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 2Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
INTERFACE PIN FUNCTION
PIN NO. SYMBOL FUNCTION
1V
SS Ground
2V
DD Supply voltage for logic
3V
0Contrast adjustment (variable)
4 RS H: data / L: instruction code
5 R / W H: read (MPU → module) / L: write (MPU → module)
6 E H, H → L chip enable signal
7DB0 Data bus line
8DB1 Data bus line
9DB2 Data bus line
10 DB3 Data bus line
11 DB4 Data bus line
12 DB5 Data bus line
13 DB6 Data bus line
14 DB7 Data bus line
15 A Power supply for backlight (+)
16 K Power supply for backlight (-)
DIMENSIONS in millimeters
DOT SIZE
SCALE 5/1
0.55
0.6
2.95 0.6
0.65
0.7
5.55
5.95
0.4
3.55
The non-specied tolerance of dimension is ± 0.3 mm.
1.6
8.6
13.2 max.
LED B/L
2
K
A
K
A
31.0
71.2
56.2 (AA)
66.0 (VA)
80.0 ± 0.5
4.95
2.5
4 x Ø 2.5 PTH
4 x Ø 5.0 PAD
12.45
7.55
12.55
10.3
16.0 (VA)
11.5 (AA)
5.725.2
36.0 ± 0.5
2.5 75.0
7.86 P2.54 x 15 = 38.1
1.8 16 x Ø 1.0 PTH
40.55
18.3
K
A
116
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 3Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.Module Classification Information
LCD -016 N 002 B -Y Y H -ET
1 2 3 4 5 6 7 8 9
1. Brand烉Vishay Intertechnology, Inc.
2. Horizontal Format: 16 characters
3. Display Type烉NɦCharacter Type, HɦGraphic Type, YɦTAB Type
4. Vertical Format: 2 Lines
5. Model serials no.: B
6. Backlight
Type烉
NɦWithout backlight
BɦEL, Blue green
DɦEL, Green
WɦEL, White
MɦEL, Yellow Green
FɦCCFL, White
YɦLED, Yellow Green
GɦLED, Green
TɦLED, White
AɦLED, Amber
RɦLED, Red
OɦLED, Orange
GɦLED, Green
PɦLED, Blue
XɦLED, Dual color
CɦLED, Full color
SɦLED, High light White
LɦLED, Full color
JɦDIP LED,Blue
KɦDIP LED,White
EɦDIP LED, Yellow Green
HɦDIP LED,Amber
IɦDIP LED, Red
7. LCD Mode烉 BɦTN Positive, Gray
NɦTN Negative,
LɦVA N e g a t i v e
Hɦ HTN Positive, Gray
IɦHTN Negative, Black
UɦHTN Negative, Blue
MɦSTN Negative, Blue
GɦSTN Positive, Gray
YɦSTN Positive, Yellow Green
VɦFSTN Negative, Blue
TɦFSTN Negative, Black
DɦFSTN Negative (Double film)
FɦFSTN Positive
KɦFSC Negative
SɦFSC Positive
EɦISTN Negative, Black
CɦCSTN Negative, Black
AɦASTN Negative, Black
8. LCD
Polarizer Type/
Temperature
range/ View
direction
AɦReflective, N.T, 6:00
DɦReflective, N.T, 12:00
GɦReflective, W. T, 6:00
JɦReflective, W. T, 12:00
BɦTransflective, N.T,6:00
EɦTransflective, N.T.12:00
HɦTransflective, W.T,6:00
KɦTransflective, W.T,12:00
CɦTransmissive, N.T,6:00
FɦTransmissive, N.T,12:00
IɦTransmissive, W. T, 6:00
LɦTransmissive, W.T,12:00
9. Special Code ET: English and European standard font
Note: Compliant with the ROHS Directions and regulations
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 4Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
2.Precautions in use of LCD Modules
(1)Avoid applying excessive shocks to the module or making any alterations or modifications to it.
(2)Don’t make extra holes on the printed circuit board, modify its shape or change the components of
LCD module.
(3)Don’t disassemble the LCM.
(4)Don’t operate it above the absolute maximum rating.
(5)Don’t drop, bend or twist LCM.
(6)Soldering: only to the I/O terminals.
(7)Storage: please storage in anti-static electricity container and clean environment.
(8) Supplier had the right to change the passive components, including R3,R6 & backlight adjust
resistors. (Resistors, capacitors and other passive components will have different appearance and
color caused by the different supplier.)
(9)Supplier has the right to change the PCB Rev. (In order to satisfy the supplying stability,
management optimization and the best product performance...etc, under the premise of not affecting
the electrical characteristics and external dimensions, Vishay has the right to modify the version.)
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 5Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
3.General Specification
Item Dimension Unit
Number of Characters 16 characters x 2Lines 炼
Module dimension 80.0 x 36.0 x 13.2 (MAX) mm
View area 66.0 x 16.0 mm
Active area 56.20 x 11.5 mm
Dot size 0.55 x 0.65 mm
Dot pitch 0.60 x 0.70 mm
Character size 2.95 x 5.55 mm
Character pitch 3.55 x 5.95 mm
LCD type STN Positive, Yellow Green Transflective
(In LCD production, It will occur slightly color difference. We
can only guarantee the same color in the same batch.)
Duty 1/16
View direction 6 o’clock
Backlight Type LED Yellow Green
IC ST7066U
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 6Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
4.Absolute Maximum Ratings
Item Symbol Min Typ Max Unit
Operating Temperature TOP -20
炼 +70 ɗ
Storage Temperature TST -30
炼 +80 ɗ
Input Voltage VI V
SS 炼 VDD V
Supply Voltage For Logic VDD-VSS -0.3
炼 7 V
Supply Voltage For LCD VDD-Vo -0.3
炼 13 V
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 7Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
5.Electrical Characteristics
Item Symbol Condition Min Typ Max Unit
Supply Voltage For Logic VDD-VSS 炼 4.5 5.0 5.5 V
Supply Voltage For LCD
*Note
VDD-V0
Ta=-20ɗ
Ta=25ɗ
Ta=70ɗ
炼
3.6
3.2
炼
3.7
炼
5.2
3.8
炼
V
V
V
Input High Volt. VIH 炼 0.7 VDD 炼 VDD V
Input Low Volt. VIL 炼 Vss 炼 0.6 V
Output High Volt. VOH 炼 3.9 炼 VDD V
Output Low Volt. VOL 炼 0 炼 0.4 V
Supply Current IDD V
DD=5.0V 1.0 1.2 1.5 mA
* Note: Please design the VOP adjustment circuit on customer's main board
10K~20K VSS
Vo
Module
VR
Vdd LCM
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 8Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
6.Optical Characteristics
Item Symbol Condition Min Typ Max Unit
View Angle
ȧ CRʁ2 0 炼 20 ȶ= 180Ʊ
ȧ CRʁ2 0 炼 40 ȶ= 0Ʊ
ȧ CRʁ2 0 炼 30 ȶ= 90Ʊ
ȧ CRʁ2 0 炼 30 ȶ= 270Ʊ
Contrast Ratio CR 炼 炼 3 炼 炼
Response Time
T rise 炼 炼 150 200 ms
T fall 炼 炼 150 200 ms
Definition of Operation Voltage (Vop) Definition of Response Time ( Tr , Tf )
Driving Voltage(V)
Intensity
Cr Max
100炴
Vop
Selected Wave
Non-selected Wave
[positive type]
Cr = Lon / Loff
Selected Condition
100% 90%
Tf
Tr
10%
ૺ
Positive type
ૻ
Non-selected
Condition
Non-selected
Condition
Intensity
Conditions :
Operating Voltage : Vop Viewing Angle(ȧ炻ȴ) : 0Ʊ炻 0Ʊ
Frame Frequency : 64 HZ Driving Waveform : 1/N duty , 1/a bias
Definition of viewing angle(CRʁ2)
ȧfȴ= 180Ʊ
ȴ= 90Ʊ
ȴ= 0Ʊ
ȴ= 270Ʊ
ȧb
ȧr
ȧl
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 9Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
7.Interface Pin Function
Pin No. Symbol Level Description
1 VSS 0V Ground
2 VDD 5.0V Supply Voltage for logic
3 VO (Variable) Contrast Adjustment
4 RS H/L H: DATA, L: Instruction code
5 R/W H/L
H: Read(MPUɦModule) L: Write(MPUɦModule)
6 E
H,HɦL Chip enable signal
7 DB0 H/L Data bus line
8 DB1 H/L
Data bus line
9 DB2 H/L
Data bus line
10 DB3 H/L
Data bus line
11 DB4 H/L
Data bus line
12 DB5 H/L
Data bus line
13 DB6 H/L
Data bus line
14 DB7 H/L
Data bus line
15 A 炼 Power supply for B/L(+)
16 K 炼 Power supply for B/L(-)
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 10 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
8.Contour Drawing &Block Diagram
1.6
8.6
13.2Max
LED B/L
2
K
A
K
A
31.0
71.2
56.2(AA)
66.0(VA)
80.0 0.5
4.95
2.5
4- 2.5 PTH
4- 5.0 PAD
DOT SIZE
SCALE 5/1
12.45
7.55
12.55
10.3
16.0(VA)
11.5(AA)
5.725.2
36.0 0.5
2.5 75.0
DB512
15
16
14
13
A
K
DB7
DB6
Vss1
DB07
11
10
8
9
DB4
DB3
DB2
DB1
4
6
5
3
2
RS
E
R/W
Vo
Vdd
7.86 P2.54*15=38.1
1.8 16- 1.0 PTH
40.55
18.3
0.55
0.6
2.95 0.6
0.65
0.7
5.55
5.95
0.4
3.55
K
A
The non-specified tolerance of dimension is 0.3mm.
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 11 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
9
Table.2
.Character Generator ROM Pattern
LLLL LLLH LLHL LLHH LHLL LHLH LHHL LHHH HLLL HLLH HLHL HLHH HHLL HHLH HHHL
Upper
4 bit
Lower
4 bit
LLLL
LLLH
LLHL
LLHH
LHLL
LHLH
LHHL
LHHH
HLLL
HLLH
HLHL
HLHH
HHLL
HHLH
HHHL
HHHH
HHHH
CG
RAM
( 1 )
CG
RAM
( 2 )
CG
RAM
( 3 )
CG
RAM
( 4 )
CG
RAM
( 5 )
CG
RAM
( 6 )
CG
RAM
( 7 )
CG
RAM
( 8 )
CG
RAM
( 1 )
CG
RAM
( 2 )
CG
RAM
( 3 )
CG
RAM
( 4 )
CG
RAM
( 5 )
CG
RAM
( 6 )
CG
RAM
( 7 )
CG
RAM
( 8 )
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 12 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10.Reliability
Content of Reliability Test (Wide temperature, -20ɗ~70ɗ)
Note1: No dew condensation to be observed.
Note2: The function test shall be conducted after 4 hours storage at the normal
Temperature and humidity after remove from the test chamber.
Note3: The packing have to including into the vibration testing.
Environmental Test
Test Item Content of Test Test Condition Note
High Temperature
storage
Endurance test applying the high storage
temperature for a long time.
80ɗ
200hrs 2
Low Temperature
storage
Endurance test applying the low storage
temperature for a long time.
-30ɗ
200hrs 1,2
High Temperature
Operation
Endurance test applying the electric stress
(Voltage & Current) and the thermal stress to the
element for a long time.
70ɗ
200hrs ——
Low Temperature
Operation
Endurance test applying the electric stress under
low temperature for a long time.
-20ɗ
200hrs 1
High Temperature/
Humidity storage
The module should be allowed to stand at 60
ɗ,90%RH max
For 96hrs under no-load condition excluding the
polarizer,
Then taking it out and drying it at normal
temperature.
60ɗ,90%RH
96hrs 1,2
Thermal shock
resistance
The sample should be allowed stand the
following 10 cycles of
operation
-20ɗ 25ɗ 70ɗ
30min 5min 30min
1 cycle
-20ɗ/70ɗ
10 cycles ——
Vibration test Endurance test applying the vibration during
transportation and using.
Total fixed
amplitude : 1.5mm
Vibration
Frequency :
10~55Hz
One cycle 60
seconds to 3
directions of X,Y,Z
for Each
15 minutes
3
Static electricity test Endurance test applying the electric stress to the
terminal.
VS=800V,RS=1.5k
ȟ
CS=100pF
1 time
——
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 13 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
11.Backlight Information
Specification
PARAMETER SYMBOL MIN TYP MAX UNIT TESTġCONDITION
Supply Current ILED 117 130 156 mA V=4.1V
Supply Voltage V 3.9 4.1 4.3 V 炼
Reverse Voltage VR 炼 炼 8 V
炼
Luminance
(Without LCD)
IV 216 270
炼CD/M2 ILED=130mA
Wave Length Ȫp569 570 573 nm ILED=130mA
Life Time 炼 炼 100000 炼Hr.
ILEDʀ130mA
25ɗ,50-60%RH
Color Yellow Green
Note: The LED of B/L is drive by current only, drive voltage is for reference only.
drive voltage can make driving current under safety area (current between
minimum and maximum).
i
ll never get Vee output from pin15)
LCM
R
2.Drive from pin15,pin16
RA
KB/L
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 14 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 15 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 16 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 17 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NO Item Criterion AQL
07 Cracked glass The LCD with extensive crack is not acceptable. 2.5
08 Backlight
elements
8.1 Illumination source flickers when lit.
8.2 Spots or scratched that appear when lit must be judged.
Using LCD spot, lines and contamination standards.
8.3 Backlight doesn’t light or color wrong.
0.65
2.5
0.65
09 Bezel
9.1 Bezel may not have rust, be deformed or have fingerprints,
stains or other contamination.
9.2 Bezel must comply with job specifications.
2.5
0.65
10 PCBˣCOB
10.1 COB seal may not have pinholes larger than 0.2mm or
contamination.
10.2 COB seal surface may not have pinholes through to the IC.
10.3 The height of the COB should not exceed the height
indicated in the assembly diagram.
10.4 There may not be more than 2mm of sealant outside the
seal area on the PCB. And there should be no more than three
places.
10.5 No oxidation or contamination PCB terminals.
10.6 Parts on PCB must be the same as on the production
characteristic chart. There should be no wrong parts, missing
parts or excess parts.
10.7 The jumper on the PCB should conform to the product
characteristic chart.
10.8 If solder gets on bezel tab pads, LED pad, zebra pad or
screw hold pad, make sure it is smoothed down.
10.9 The Scraping testing standard for Copper Coating of PCB
X
Y
X * Y<=2mm2
2.5
2.5
0.65
2.5
2.5
0.65
0.65
2.5
2.5
11 Soldering
11.1 No un-melted solder paste may be present on the PCB.
11.2 No cold solder joints, missing solder connections,
oxidation or icicle.
11.3 No residue or solder balls on PCB.
11.4 No short circuits in components on PCB.
2.5
2.5
2.5
0.65
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 18 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NO Item Criterion AQL
12 General
appearance
12.1 No oxidation, contamination, curves or, bends on interface
Pin (OLB) of TCP.
12.2 No cracks on interface pin (OLB) of TCP.
12.3 No contamination, solder residue or solder balls on product.
12.4 The IC on the TCP may not be damaged, circuits.
12.5 The uppermost edge of the protective strip on the interface
pin must be present or look as if it cause the interface pin to sever.
12.6 The residual rosin or tin oil of soldering (component or chip
component) is not burned into brown or black color.
12.7 Sealant on top of the ITO circuit has not hardened.
12.8 Pin type must match type in specification sheet.
12.9 LCD pin loose or missing pins.
12.10 Product packaging must the same as specified on packaging
specification sheet.
12.11 Product dimension and structure must conform to product
specification sheet.
12.12 Visual defect outside of VA is not considered to be rejection.
2.5
0.65
2.5
2.5
2.5
2.5
2.5
0.65
0.65
0.65
0.65
0.65
LCD-016N002B-YYH-ET
www.vishay.com Vishay
Revision: 06-Feb-15 19 Document Number: 37490
For technical questions, contact: displays@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
13.Material List of Components for RoHS
1. Declaration that all of or part of products (with the mark “N” in code), including, but not limited to,
the LCM, accessories or packages, manufactured and/or delivered to your company (including your
subsidiaries and affiliated company) directly or indirectly by our company (including our subsidiaries or
affiliated companies) do not intentionally contain any of the substances listed in all applicable EU
directives and regulations, including the following substances.
Exhibit A烉The Harmful Material List
Material (Cd) (Pb) (Hg) (Cr6+) PBBs PBDEs
Limited
Val ue
100
ppm
1000
ppm
1000
ppm
1000
ppm
1000
ppm
1000
ppm
Above limited value is set up according to RoHS.
2.Process for RoHS requirement烉
(1) Use the Sn/Ag/Cu soldering surface烊the surface of Pb-free solder is rougher than we used before.
(2) Heat-resistance temp.烉
Reflow烉250,30 seconds Max.烊
Connector soldering wave or hand soldering烉320, 10 seconds max.
(3) Temp. curve of reflow, max. Temp.烉235±5烊
Recommended customer’s soldering temp. of connector烉280, 3 seconds.
14.Recommendable Storage
1. Place the panel or module in the temperature 25°C±5°C and the humidity below 65% RH
2. Do not place the module near organics solvents or corrosive gases.
3. Do not crush, shake, or jolt the module.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED