L–45
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L
Rotary
Models Available
C&K H Series
Power ROTA-SLIDE® Rotary Switches
Features/Benefits
•Multi-pole and multi-position
•Positive detent
•Power switching up to 12 AMPS
•Value added capability
Typical Applications
•Small appliances
•Industrial equipment
•Elevators
Specifications
CONTACT RATING: 12 Amps @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º-one contact models, 8 positions max.; two contact
models, 4 positions max.
OPERATING & STORAGE TEMPERATURE: -30ºC to 95ºC
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
HOUSING & BUSHING: 6/6 nylon (UL 94V-2).
ACTUATOR: 6/6 nylon (UL 94V-2).
CONTACTS & TERMINALS: Copper, silver plated.
CONTACT SPRING: Music wire or stainless steel.
MOUNTING NUT: Steel, zinc plated.
TERMINAL SEAL: Epoxy.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L-46 thru L-47. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
H203 DP, 45° Index, 3 pos.
H101 SPST, 45° Index
H202 DPDT, 45° Index
H204 DP, 45° Index, 4 pos.
Terminations
05 .110" quick connect
01 Solder lug with notch
Contact Material
QSilver
Actuator
07 .275" high with .156" flat
Mounting Style
RR 3/8-40 threaded bushing
L–46
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L
Rotary
C&K H Series
Power ROTA-SLIDE® Rotary Switches
SWITCH FUNCTION
ACTUATOR
DP MODELS 45º INDEXING
SCHEMATIC
SP MODELS 45º INDEXING
SCHEMATIC
07 .275" HIGH WITH .156" FLAT
Part number shown: H10107RR05Q
8-1SPST
H101
SP
TERMINALS
SWITCH
FUNCTION
MODEL
NO.
NO.
POLES
SP MODELS 45º INDEXING
All Terminals4 Position
H204
All Terminals3 Position
H203
7-8-1, 3-4-5DPDT
H202
DP
TERMINALS
SWITCH
FUNCTION
MODEL
NO.
NO.
POLES
DP MODELS 45º INDEXING
NOTE: Break-before-make contacts. Terminal numbers are molded
on bottom of housing. Actuators and contacts are shown in position 1.
No common terminal is present. Switching function is provided by
movable contacts shorting adjacent pairs of stationary contacts.
All models with all options.
L–47
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
L
Rotary
C&K H Series
Power ROTA-SLIDE® Rotary Switches
MOUNTING STYLE
TERMINATIONS
CONTACT MATERIAL
PANEL MOUNTING
05 SOLDER LUG WITH HOLE 01 SOLDER LUG WITH NOTCH
RR 3/8-32 THREADED BUSHING
Mounting nut included (part number 175000100).
Not available on models with 90º indexing.
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
1CONTACTS & TERMINALS: Copper, silver plated.
All models with all options.
NOTE: Any models supplied with Q contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
CONTACT AND
OPTION
CODE TERMINAL MATERIAL RATING
Q12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC.
SILVER 1POWER
RoHS
COMPLIANT*
RoHS
COMPATIBLE*
YES YES
