US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Micro Spring™ Air Core Inductors
Document 163-1
Document 163-1 Revised 09/16/16
Part
Inductance2 Percent
Q4 SRF min5
DCR max6
Irms7
number1 Turns (nH) tolerance3 min (GHz) (mOhm) (A)
0906-2_L_ 2 1.65 10,5,2 100 10.0 4.0 1.6
0906-3_L_ 3 2.55 5,2,1 100 8.2 5.0 1.6
0906-4_L_ 4 3.85 5,2,1 100 7.5 6.0 1.6
0906-5_L_ 5 5.40 5,2,1 100 7.0 8.0 1.6
1606-6_L_ 6 5.60 5,2,1 100 6.5 9.0 1.6
1606-7_L_ 7 7.15 5,2,1 100 6.0 10 1.6
1606-8_L_ 8 8.80 5,2,1 100 6.0 12 1.6
1606-9_L_ 9 9.85 5,2,1 100 5.2 13 1.6
1606-10_L_ 10 12.55 5,2,1 100 4.6 14 1.6
1. When ordering, specify tolerance, termination and packaging codes:
1606-10GLC
Tolerance: F = 1% G = 2% J = 5% K = 10% (Table shows stock
tolerances in bold.)
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape, 500 parts per full reel.
B = Less than full reel. In tape, but not machine-ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
P = 7″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (3000 parts per
full reel).
Terminations RoHS compliant tin-silver over copper Other termina-
tions available at additional cost.
Weight 0906: 10 – 12 mg; 1606: 18 – 27 mg
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise)
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 0906: 500 per 7″ reel Plastic tape: 8 mm wide,
0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth
1606: 500 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm thick,
4 mm pocket spacing, 1.6 mm pocket depth
Recommended pick and place nozzle: OD: 0.059″; ID: 0.035″
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• Small air core inductors feature high Q and tight tolerances
• Acrylic jacket provides a flat top for pick and place
• Solder coated leads ensure reliable soldering
2. Inductance measured at 800 MHz using Agilent/HP 4286 or equivalent
with a Coilcraft SMD-A fixture and correlation.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/
HP 16193A test fixture or equivalents.
5. SRF measured using an Agilent/HP 8720D or equivalent with a Coilcraft
SMD-D fixture.
6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter
or equivalent.
7. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute maxi-
mum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2017
This product may not be used in medical or high
risk applications without prior Coilcraft appr
oval.
Specification subject to change without notice.
Please check web site for latest infor
mation.
Document 163-2
Document 163-2 Revised 09/16/06
Micro Spring™ Air Core Inductors
Typical L vs Frequency – 0906 Series Typical L vs Frequency – 1606 Series
0
2
4
6
8
10
12
14
100 1000
Frequency (MHz)
Inductance (nH)
3.85 nH
2.55 nH
1.65 nH
5.40 nH
0
2
4
6
8
10
12
14
100 1000
Frequency (MHz)
Inductance (nH)
12.55 nH
9.85 nH
8.80 nH
7.15 nH
5.60 nH
Typical Q vs Frequency – 0906 Series Typical Q vs Frequency – 1606 Series
0
50
100
150
200
250
100 1000
Frequency (MHz)
Q factor
1.65 nH
2.55 nH
3.85 nH
5.40 nH
0
50
100
150
200
250
100 1000
Frequency (MHz)
Q factor
7.15 nH
12.55 nH
8.80 nH
5.60 nH
9.85 nH
Designer’s Kit C308 contains 12 each of all values.
Designer’s Kit C308-2 contains12 each of all 2% values.
SizeA maxB max C max DEF max
0906 0.095 0.060 0.0720.135 0.055 ±0.010 ±0.010 0.020
2,41 3,43 1,52 1,40 ±0,25 1,83 ±0,25 0,51
1606 0.165 0.135 0.062 0.055 ±0.010 0.144 ±0.012 0.020
4,19 3,43 1,58 1,40 ±0,25 3,66 ±0,30 0,51
Recommended Land Patterns
0906 Size 1606 Size
0.031
0,79
0.031
0,79
0.144
3,66
0.072
1,83
0.097
2,46
0.097
2,46 0.040
1,02
0.040
1,02
A
B
D
C
E
F
Strip
Length
135°
max
0° min
Pick and place
surface
Dimensions are in inches
mm
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
1606-10JLB 0906-3GLC 1606-8JLC 1606-7GLB 1606-8JLB 0906-4JLB 1606-8GLB 0906-4JLC 1606-7GLC
1606-10GLB 1606-9JLB 0906-3GLB 1606-8GLC 0906-4GLB 1606-10JLC 1606-9JLC 1606-6JLB 0906-3JLC
0906-5JLC 1606-6GLC 1606-9GLC 0906-3JLB 1606-6GLB 0906-2KLB 1606-9GLB 0906-4GLC 1606-7JLB 0906-
5JLB 0906-5GLB 1606-6JLC 0906-2KLC 0906-5GLC 1606-10GLC 1606-7JLC
