Web page Sample & buy Tools & software Support & FAQ Document 163-1 Micro SpringTM Air Core Inductors * Small air core inductors feature high Q and tight tolerances * Acrylic jacket provides a flat top for pick and place * Solder coated leads ensure reliable soldering Terminations RoHS compliant tin-silver over copper Other terminations available at additional cost. Weight 0906: 10 -12 mg; 1606: 18 - 27 mg Ambient temperature -40C to +125C with Irms current Maximum part temperature +140C (ambient + temp rise) Storage temperature Component: -40C to +140C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 0906: 500 per 7 reel Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth 1606: 500 per 7 reel Plastic tape: 12 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth Recommended pick and place nozzle: OD: 0.059; ID: 0.035 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 0906-2_L_ 0906-3_L_ 0906-4_L_ 0906-5_L_ 1606-6_L_ 1606-7_L_ 1606-8_L_ 1606-9_L_ 1606-10_L_ Inductance2 Turns 2 3 4 5 6 7 8 9 10 Percent (nH)tolerance3 1.65 10,5,2 2.55 5,2,1 3.85 5,2,1 5.40 5,2,1 5.60 5,2,1 7.15 5,2,1 8.80 5,2,1 9.85 5,2,1 12.55 5,2,1 1. When ordering, specify tolerance, termination and packaging codes: 1606-10GLC F = 1% G = 2% J = 5% K = 10% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape, 500 parts per full reel. B = Less than full reel. In tape, but not machine-ready. To have a leader and trailer added ($25 charge), use code letter C instead. P = 7 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel). Tolerance: Q4 min 100 100 100 100 100 100 100 100 100 SRF min5 (GHz) 10.0 8.2 7.5 7.0 6.5 6.0 6.0 5.2 4.6 DCR max6 (mOhm) 4.0 5.0 6.0 8.0 9.0 10 12 13 14 Irms7 (A) 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2. Inductance measured at 800 MHz using Agilent/HP 4286 or equivalent with a Coilcraft SMD-A fixture and correlation. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 800 MHz using an Agilent/HP 4291A with an Agilent/ HP 16193A test fixture or equivalents. 5. SRF measured using an Agilent/HP 8720D or equivalent with a Coilcraft SMD-D fixture. 6. DCR tested on the Cambridge Technology Model 510 Micro-ohmmeter or equivalent. 7. Current that causes a 15C temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 163-1 Revised 09/16/16 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 163-2 Designer's Kit C308 contains 12 each of all values. Designer's Kit C308-2 contains12 each of all 2% values. Micro SpringTM Air Core Inductors Typical L vs Frequency - 1606 Series 14 14 12 12 10 10 Inductance (nH) Inductance (nH) Typical L vs Frequency - 0906 Series 8 6 5.40 nH 4 3.85 nH 2 2.55 nH 1.65 nH 0 100 Frequency (MHz) Typical Q vs Frequency - 0906 Series 5.60 nH 4 100 1000 Frequency (MHz) 250 2.55 nH 1.65 nH 3.85 nH 5.40 nH 7.15 nH 8.80 nH 5.60 nH 12.55 nH 9.85 nH 200 Q factor Q factor 7.15 nH 6 Typical Q vs Frequency - 1606 Series 150 100 150 100 50 50 0 8.80 nH 8 0 200 9.85 nH 2 1000 250 12.55 nH 100 0 1000 100 1000 Frequency (MHz) Frequency (MHz) A Pick and place surface D Recommended Land Patterns E 0906 Size C B 0.097 2,46 0.040 1,02 F Size 0906 A max 0.095 2,41 B max 0.135 3,43 C max 0.060 1,52 D 0.055 0.010 1,40 0,25 E 0.072 0.010 1,83 0,25 F max 0.020 0,51 1606 0.165 4,19 0.135 3,43 0.062 1,58 0.055 0.010 1,40 0,25 0.144 0.012 3,66 0,30 0.020 0,51 Dimensions are in 1606 Size 0.031 0,79 0.072 1,83 inches mm Strip Length US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 0.031 0,79 0.097 2,46 0.040 1,02 0.144 3,66 135 max 0 min Document 163-2 Revised 09/16/06 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: 1606-10JLB 0906-3GLC 1606-8JLC 1606-7GLB 1606-8JLB 0906-4JLB 1606-8GLB 0906-4JLC 1606-7GLC 1606-10GLB 1606-9JLB 0906-3GLB 1606-8GLC 0906-4GLB 1606-10JLC 1606-9JLC 1606-6JLB 0906-3JLC 0906-5JLC 1606-6GLC 1606-9GLC 0906-3JLB 1606-6GLB 0906-2KLB 1606-9GLB 0906-4GLC 1606-7JLB 09065JLB 0906-5GLB 1606-6JLC 0906-2KLC 0906-5GLC 1606-10GLC 1606-7JLC