© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 1
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL
• Rated voltage: 275 VAC 50/60 Hz
• Capacitance range: 0.01 – 1 µF
• Lead spacing: 10.0 – 22.5 mm
• Capacitance tolerance: ±20%, ±10%, ±5% on request
• Climatic category: 40/125/56, IEC 60068–1
• Tape and reel in accordance with IEC 60286–2
• RoHS Compliant and lead-free terminations
• Operating temperature range of -40˚C to +125˚C
• 100% screening factory test at 2,200 VDC/1,500 VAC
Overview
The R46 Series is constructed of metallized polypropylene lm
encapsulated with self-extinguishing resin in a box of material
meeting the requirements of UL 94 V–0.
Applications
Typical applications include worldwide use in electromagnetic
interference suppression in all X2 and across-the-line
applications. Not for use in series with the mains.
AC Line EMI Suppression and RC Networks
R46 Series 125ºC Metallized Polypropylene Film,
Class X2, 275 VAC/310 VAC
Part Number System
R46 K I 2100 00 H1 M
Series Rated voltage (VAC) Lead Spacing (mm) Capacitance Code (pF) Lead and
Packaging Code Internal Use Capacitance
Tolerance
X2, Metallized
Polypropylene
K = 275 F = 10.0
I = 15.0
N = 22.5
Digits 2 – 4 indicate the
rst three digits of the
capacitance value.
First digit indicates the
number of zeros to be added.
See Ordering
Options Table
High Temperature
H1, H2, H3
(Standard)
J = ±5%
K = ±10%
M = ±20%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 2
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Ordering Options Table
Lead Spacing
Nominal (mm) Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging Code
10
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 4 +2/-0 00
Ammo Pack H
0
= 18.5 +/-0.5 DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel) H0= 18.5 +/-0.5 CK
Bulk (Bag) – Long Leads 25 +2/-1 50
Bulk (Bag) – Max Length Leads 30 +5/-0 40
15
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads 4 +2/-0 00
Ammo Pack H
0
= 18.5 +/-0.5 DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 CK
Bulk (Bag) – Long Leads 25 +2/-1 50
Bulk (Bag) – Max Length Leads 30 +5/-0 40
Pizza Pack 4 +2/-0 BB
22.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads 4 +2/-0 00
Ammo Pack H
0
= 18.5 +/-0.5 DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 +/-0.5 CK
Bulk (Tray) – Long Leads 25 +2/-1 50
Bulk (Tray) – Max Length Leads 30 +5/-0 40
Pizza Pack 4 +2/-0 BB
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 3
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Dimensions – Millimeters
L
B
H
d
p
LL
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0 +/-0.4 5.0 +0.2/-0 11.0 +0.1/-0 13.0 +0.2/-0 0.6 +/-0.05
10.0 +/-0.4 6.0 +0.2/-0 12.0 +0.1/-0 13.0 +0.2/-0 0.6 +/-0.05
15.0 +/-0.4 5.0 +0.2/-0 11.0 +0.1/-0 18.0 +0.3/-0 0.6 +/-0.05
15.0 +/-0.4 6.0 +0.2/-0 12.0 +0.1/-0 18.0 +0.3/-0 0.6 +/-0.05
15.0 +/-0.4 6.0 +0.2/-0 17.5 +0.1/-0 18.0 +0.3/-0 0.6 +/-0.05
15.0 +/-0.4 7.5 +0.2/-0 13.5 +0.1/-0 18.0 +0.5/-0 0.6 +/-0.05
15.0 +/-0.4 7.5 +0.2/-0 18.5 +0.1/-0 18.0 +0.5/-0 0.8 +/-0.05
15.0 +/-0.4 8.5 +0.2/-0 14.5 +0.1/-0 18.0 +0.5/-0 0.6 +/-0.05
15.0 +/-0.4 9.0 +0.2/-0 12.5 +0.1/-0 18.0 +0.5/-0 0.8 +/-0.05
15.0 +/-0.4 10.0 +0.2/-0 16.0 +0.1/-0 18.0 +0.5/-0 0.8 +/-0.05
15.0 +/-0.4 11.0 +0.2/-0 19.0 +0.1/-0 18.0 +0.5/-0 0.8 +/-0.05
15.0 +/-0.4 13.0 +0.2/-0 12.0 +0.1/-0 18.0 +0.5/-0 0.8 +/-0.05
22.5 +/-0.4 6.0 +0.2/-0 15.0 +0.1/-0 26.5 +0.3/-0 0.8 +/-0.05
22.5 +/-0.4 7.0 +0.2/-0 16.0 +0.1/-0 26.5 +0.3/-0 0.8 +/-0.05
22.5 +/-0.4 8.5 +0.2/-0 17.0 +0.1/-0 26.5 +0.3/-0 0.8 +/-0.05
22.5 +/-0.4 10.0 +0.2/-0 18.5 +0.1/-0 26.5 +0.3/-0 0.8 +/-0.05
22.5 +/-0.4 11.0 +0.2/-0 20.0 +0.1/-0 26.5 +0.3/-0 0.8 +/-0.05
22.5 +/-0.4 13.0 +0.2/-0 22.0 +0.1/-0 26.5 +0.3/-0 0.8 +/-0.05
Note: See Ordering Options Table for lead length (LL) options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 4
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Performance Characteristics
Rated Voltage 275 VAC 50/60 Hz
Capacitance Range 0.01 – 1 µF
Capacitance Tolerance ±20%, ±10%, ±5% on request
Temperature Range -40ºC to +125°C
Climatic Category 40/125/56
Approvals ENEC, UL, cUL
Dissipation Factor
Maximum Values at +23°C
1 kHz 0.1%
Test Voltage Between Terminals
The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC.
The voltage level is selected to meet the requirements in applicable
equipment standards. All electrical characteristics are checked after the
test. It is not permitted to repeat this test as there is a risk to damage the
capacitor. KEMET is not liable in such case for any failures.
Insulation Resistance
Minimum Values Between Terminals
C ≤ 0.33 µF ≥ 50,000 MΩ
C > 0.33 µF ≥ 30,000 MΩ • µF
In DC Applications Recommended voltage ≤ 560 VDC
Impedance Graph
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 5
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Environmental Test Data
Test IEC Publication Procedure
Endurance EN/IEC 60384–14
1.25 x V
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second,
1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC 60068–2–29 Test Eb 1,000 bumps at 390 m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
Active Flammability IEC 60384–14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds)
Passive Flammability IEC 60384–14 IEC 60384–1, IEC 60695–11–5 Needle ame test
Damp Heat Steady State IEC 60068–2–78 Test Cab +40°C and 93% RH, 56 days
Approvals
Mark Specication File Number
EN/IEC 60384–14 CA08.00063
UL 1414 (up to 1 μF, 85°C, 250 VAC) E97797
CSA – C22.2 No. 1 (up to 1 μF, 85°C, 250 VAC) E97797
UL 1283 (310 VAC) E85238
CSA – C22.2 No. 8 (310 VAC) E85238
Environmental Compliance
All KEMET EMI capacitors are RoHS Compliant.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 6
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Dimensions in mm Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number Legacy Part Number
B H L
0.010 5.0 11.0 13.0 10.0 500 46KF2100(1)H1(3) R46KF2100(1)H1(3)
0.015 5.0 11.0 13.0 10.0 500 46KF2150(1)H1(2) R46KF2150(1)H1(2)
0.022 5.0 11.0 13.0 10.0 500 46KF2220(1)H1(2) R46KF2220(1)H1(2)
0.033 5.0 11.0 13.0 10.0 500 46KF2330(1)H1(2) R46KF2330(1)H1(2)
0.047 6.0 12.0 13.0 10.0 500 46KF2470(1)H1(2) R46KF2470(1)H1(2)
0.068 6.0 12.0 13.0 10.0 500 46KF2680(1)H1(3) R46KF2680(1)H1(3)
0.010 5.0 11.0 18.0 15.0 400 46KI2100(1)H1(2) R46KI2100(1)H1(2)
0.015 5.0 11.0 18.0 15.0 400 46KI2150(1)H1(2) R46KI2150(1)H1(2)
0.022 5.0 11.0 18.0 15.0 400 46KI2220(1)H1(2) R46KI2220(1)H1(2)
0.033 5.0 11.0 18.0 15.0 400 46KI2330(1)H1(2) R46KI2330(1)H1(2)
0.047 5.0 11.0 18.0 15.0 400 46KI2470(1)H1(2) R46KI2470(1)H1(2)
0.068 5.0 11.0 18.0 15.0 400 46KI2680(1)H1(2) R46KI2680(1)H1(2)
0.10 6.0 12.0 18.0 15.0 400 46KI3100(1)H1(2) R46KI3100(1)H1(2)
0.15 6.0 17.5 18.0 15.0 400 46KI3150(1)H2(2) R46KI3150(1)H2(2)
0.15 9.0 12.5 18.0 15.0 400 46KI3150(1)H3(2) R46KI3150(1)H3(2)
0.15 7.5 13.5 18.0 15.0 400 46KI3150(1)H1(2) R46KI3150(1)H1(2)
0.22 8.5 14.5 18.0 15.0 400 46KI3220(1)H1(2) R46KI3220(1)H1(2)
0.22 6.0 17.5 18.0 15.0 400 46KI3220(1)H2(3) R46KI3220(1)H2(3)
0.22 9.0 12.5 18.0 15.0 400 46KI3220(1)H3(3) R46KI3220(1)H3(3)
0.22 7.5 18.5 18.0 15.0 400 46KI3220(1)H4(2) R46KI3220(1)H4(2)
0.33 10.0 16.0 18.0 15.0 400 46KI3330(1)H1(3) R46KI3330(1)H1(3)
0.33 7.5 18.5 18.0 15.0 400 46KI3330(1)H2(3) R46KI3330(1)H2(3)
0.33 13.0 12.0 18.0 15.0 400 46KI3330(1)H3(3) R46KI3330(1)H3(3)
0.47 11.0 19.0 18.0 15.0 400 46KI3470(1)H1(3) R46KI3470(1)H1(3)
0.15 6.0 15.0 26.5 22.5 200 46KN3150(1)H1(2) R46KN3150(1)H1(2)
0.22 6.0 15.0 26.5 22.5 200 46KN3220(1)H1(2) R46KN3220(1)H1(2)
0.33 7.0 16.0 26.5 22.5 200 46KN3330(1)H1(2) R46KN3330(1)H1(2)
0.47 10.0 18.5 26.5 22.5 200 46KN3470(1)H1(2) R46KN3470(1)H1(2)
0.68 11.0 20.0 26.5 22.5 200 46KN3680(1)H1(2) R46KN3680(1)H1(2)
1.0 13.0 22.0 26.5 22.5 200 46KN4100(1)H1(2) R46KN4100(1)H1(2)
Capacitance Value (µF) B (mm) H (mm) L (mm) Lead
Spacing (p) dV/dt (V/µs) New KEMET
Part Number Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%, J = ±5% on request.
(3) M = ±20% (only available tolerance).
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 7
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Soldering Process
The implementation of the RoHS Directive has required the use
of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys
require a higher liquidus temperature (217ºC – 221ºC) as compared
to SnPb eutectic alloy (183ºC). Due to the higher pre-heat and
wave temperatures, the heat stress to components has increased
considerably. Polypropylene capacitors are especially sensitive
to soldering temperature due to the relatively low melting point of
polypropylene material (160ºC – 170ºC). As a result, wave soldering
can be destructive, especially to mechanically small polypropylene
capacitors with lead spacings of 5 – 10 mm. For more information,
please refer to KEMET’s Recommended Soldering Proles or contact
a KEMET representative. IEC Publication 61760–1 Edition 2 may
also be consulted for general guidelines.
Marking
• KEMET’s logo
• Series
• Capacitance
• Capacitance tolerance
• Rated voltage
• Capacitor class
• Approval marks
• Manufacturing date code
• IEC climatic category
• Passive ammability class
• Manufacturing plant
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 8
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard Reel
ø 355 mm
Large Reel
ø 500 mm Ammo Pizza
10
4
9
13
2000
2200
750
1500
1000
511 13 1300 2000 600 1250 800
612 13 1000 1800 500 1000 680
15
410 18 2500 1500 750 1500 1000 1411
511 18 1000 1250 600 1250 800 1139
612 18 1750 1000 500 1000 680 935
7.5 13.5 18 1000 800 350 800 500 748
617.5 18 1000 800 500 1000 680 935
7.5 14.5 18 1000 750 350 800 500 748
8.5 14.5 18 1000 650 300 700 440 663
912.5 18 1000 700 270 650 410 629
7.5 18.5 18 900 600 350 800 500 748
10 16 18 750 550 300 600 380 561
13 12 18 750 520 200 480 280 425
11 19 18 450 400 250 500 340 510
22.5
615 26.5 1404 702 300 700 464 660
716 26.5 1188 594 250 550 380 564
8.5 17 26.5 972 486 250 450 280 468
10 18.5 26.5 810 405 160 350 235 396
11 20 26.5 630 378 190 350 217 360
13 22 26.5 540 324 150 300 200 300
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 9
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Dimensions in mm Standard IEC 60286–2
Lead spacing +6/-0.1 F 5 7.5 10 15 22.5 27.5 F
Carrier tape width +1/-0.5 W18 18 18 18 18 18 18+1/-0.5
Hold-down tape width Minimum W066910 10 10
Position of sprocket hole +/-0.5 W1999999 9+0.75/-0.5
Distance between tapes Maximum W2333333 3
Sprocket hole diameter +/-0.2 D0444444 4
Feed hole lead spacing +/-0.2(1) P
0
(3) 12.7 12.7 12.7 12.7 12.7 12.7 12.7
Distance lead – feed hole +/-0.7 P13.85 3.75 7.7 5.2 7.8 5.3 P1
Deviation tape – plane Maximum ∆p 1.3 1.3 1.3 1.3 1.3 1.3 1.3
Lateral deviation +/-2 ∆h 222222 2
Total thickness +/-0.2 t0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX
Sprocket hole/cap body +/-0.5 H0
(2) 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18.5+/-0.5 18+2/-0
(1) Maximum cumulative feed hole error, 1 mm per 20 parts.
(2) 16.5 mm available on request.
(3) 15 mm available on request (F ≥ 10 mm).
Lead Spacing 5 mm
Lead Spacing 7.5 mm
Lead Spacing 10 – 15 mm
Lead Spacing 22.5 – 27.5 mm
0
0
0
0
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 10
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
H
T
W
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Series Dimensions (mm)
H W T
R4x, R4x+R, R7x, RSB
360 340 59F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx 330 330 50
Reel Speci cations
Series Dimensions (mm)
D H W
R4x, R4x+R, R7x, RSB 355
500
30
25 55 (Max)F5A, F5B, F5D
F6xx, F8xx
PHExxx, PMExxx, PMRxxx
360
500
30 46 (Max)
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000 MJanuary 1
2001 NFebruary 2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008 WSeptember 9
2009 XOctober O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017 J
2018
K
2019
L
2020
M
D
W
H
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 11
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
Central
Novi, MI
Tel: 248-994-1030
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Paris, France
Tel: 33-1-4646-1006
Sasso Marconi, Italy
Tel: 39-051-939111
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Kamen, Germany
Tel: 49-2307-438110
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-460122
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 12
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Electrolytic LifeCalculator http://www.kemet.com:8080/elc
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3006_R46_X2_275-310_125ºC • 4/4/2013 13
Film Capacitors
AC Line EMI Suppression and RC Networks – R46 Series 125ºC Metallized Polypropylene Film, Class X2, 275 VAC/310 VAC
Digitally signed by Jeannette Calvo
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette
Calvo, email=jeannettecalvo@kemet.com
Date: 2013.04.05 15:24:35 -04'00'
