DS14C335 DS14C335 +3.3V Supply TIA/EIA-232 3 x 5 Driver/Receiver Literature Number: SNLS090B DS14C335 +3.3V Supply TIA/EIA-232 3 x 5 Driver/Receiver General Description Features The DS14C335 is three driver, five receiver device which conforms to TIA/EIA-232-E and CCITT V.28 standard specifications. This device employs an internal DC-DC converter to generate the necessary output levels from a +3.3V power supply. A SHUTDOWN (SD) mode reduces the supply current to 10 A maximum. In the SD mode, one receiver is active, allowing ring indicator (RI) to be monitored. PC Board space consumption is minimized by the availability of Shrink Small Outline Packaging (SSOP). This device's low power requirement and small footprint makes it an ideal choice for Laptop and Notebook applications. n Conforms to TIA/EIA-232-E and CCITT V.28 specifications n Operates with single +3.3V power supply n Low power requirement -- ICC 20 mA maximum n SHUTDOWN mode -- ICX 10 A maximum n One Receiver (R5) active during SHUTDOWN n Operates up to 128 kbps -- Lap-Link (R) Compatible n Flow through pinout n 4V/s minimum Slew Rate guaranteed n Inter-operates with +5V UARTs n Available in 28-lead SSOP EIAJ Type II package Connection Diagram Functional Diagram DS14C335 01173401 Order Number DS14C335MSA See NS Package Number MSA28 01173402 Lap-Link (R) is a registered trademark of Traveling Software. (c) 2004 National Semiconductor Corporation DS011734 www.national.com DS14C335 +3.3V Supply TIA/EIA-232 3 x 5 Driver/Receiver March 2000 DS14C335 Absolute Maximum Ratings (Note 1) Short Circuit Duration (DOUT) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Maximum Package Power Dissipation @ +25C Supply Voltage (VCC) (VCC-0.3V) to +14V V- Pin +0.3V to -14V Input Voltage (DIN, SD) Driver Output Voltage 1286 mW Derate MSA Package 10.3 mW/C above +25C ESD Rating 2.0 kV (HBM, 1.5 k, 100 pF) -0.3V to + 5.5V Recommended Operating Conditions (V+ + 0.3V) to (V- -0.3V) 25V Receiver Input Voltage Receiver Output Voltage SSOP MSA Package -0.3V to + 6V V+ Pin continuous Min Max Units -0.3V to (VCC+ 0.3V) Junction Temperature +150C Storage Temperature Range -65C to +150C Supply Voltage (VCC) 3.0 3.6 V DC-DC Converter Capacitors (C1-C5) 0.47 F Operating Free Air Temperature (TA) Lead Temperature (Soldering 4 sec.) DS14C335 +260C 0 +70 C Electrical Characteristics (Notes 2, 3) Over recommended operating conditions, SD = 0.8V, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units DEVICE CHARACTERISTICS V+ Positive Power Supply No Load DIN = 0.8V +9.3 V- Negative Power Supply C1-C5 = 0.47 F DIN = 2.0V -9.0 ICC Supply Current No Load 11.5 20 mA ICX SHUTDOWN Supply Current RL = 3 k, SD = VCC, 5.5V 1.0 10 A VIH High Level Enable Voltage VIL Low Level Enable Voltage IIH High Level Enable Current 2.0V VIN 5.5V IIL Low Level Enable Current GND VIN 0.8V SD V V 2.0 V GND 0.8 V +2.0 A -2.0 A 2.0 V DRIVER CHARACTERISTICS VIH High Level Input Voltage VIL Low Level Input Voltage IIH High Level Input Current 2.0V VIN 5.5V IIL Low Level Input Current GND VIN 0.8V -1.0 VOH High Level Output Voltage RL = 3 k +5.0 +7.1 VOL Low Level Output Voltage -6.3 -5.0 V IOS+ Output High Short VO = 0V, VIN = 0.8V (Note 7) -40 -16.5 -8 mA VO = 0V, VIN = 2.0V (Note 7) 6 12.3 40 mA DIN GND 0.8 V +1.0 A A V Circuit Current IOS- Output Low Short Circuit Current RO Output Resistance -2V VO +2V, VCC = GND = 0V 300 RECEIVER CHARACTERISTICS (Note 4) VTH Input High Threshold Voltage VTL Input Low Threshold Voltage R1-R5, SD = 0.8V R5, 2.0V SD 5.5V www.national.com 1.4 2.4 2.0 2.8 V V R1-R5, SD = 0.8V 0.4 1.1 V R5, 2.0V SD 5.5V 0.1 0.5 V 2 (Continued) Over recommended operating conditions, SD = 0.8V, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units RECEIVER CHARACTERISTICS (Note 4) VHY Hysteresis 50 300 RIN Input Resistance VIN = 3V to 15V 3.0 3.8 IIN Input Current VIN = +15V VIN = +3V VOH VOL High Level Output Voltage Low Level Output Voltage mV 7.0 k 2.14 5.0 mA 0.43 1.0 mA VIN = -3V -1.0 -0.43 mA -2.14 mA VIN = -15V -5.0 VIN = -3V, IOH = -1 mA 2.4 3.1 V VIN = -3V, IOH = -100 A 2.8 3.28 V VIN = +3V, IOL = +2 mA 0.23 0.4 V Switching Characteristics (Note 2) Over recommended operating conditions, SD = 0.8V, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units DRIVER CHARACTERISTICS tPLH Propagation Delay LOW to HIGH tPHL Propagation Delay HIGH to LOW tSK Skew |tPLH-tPHL| RL = 3 k CL = 50 pF (Figures 1, 2) 0 0.2 s SR1 Output Slew Rate RL = 3 k to 7 k, CL = 50 pF (Figure 2) 4 13 30 V/s SR2 Output Slew Rate RL = 3 k, CL = 2500 pF (Figure 2) 4 10 30 V/s (Figures 5, 6) RL = 3 k CL = 50 pF tPLS Propagation Delay LOW to SD tPSL Propagation Delay SD to LOW tPHS Propagation Delay HIGH to SD tPSH Propagation Delay SD to HIGH 0.1 0.6 1.0 s 0.1 0.6 1.0 s 0.48 ms 1.88 ms 0.62 ms 1.03 ms RECEIVER CHARACTERISTICS tPLH Propagation Delay LOW to HIGH tPHL Propagation Delay HIGH to LOW tSK Skew |tPLH-tPHL| tPLS Propagation Delay LOW to SD tPSL Propagation Delay SD to LOW tPHS Propagation Delay HIGH to SD tPSH Propagation Delay SD to HIGH CL = 50 pF (Figures 3, 3) (Figures 7, 8) RL = 1 k CL = 50 pF R1-R4 Only 0.1 0.4 1.0 s 0.1 0.6 1.0 s 0.2 0.8 s 0.13 s 1.0 s 0.19 s 0.58 s Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" specify conditions for device operation. Note 2: Typical values are given for VCC = 3.3V and TA = +25C. Note 3: Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground unless otherwise specified. Note 4: Receiver characteristics are guaranteed for SD = 0.8V. When SD = 2.0V, receiver five (R5) is active and meets receiver parameters in SHUTDOWN (SD) mode, unless otherwise specified. Note 5: Generator characteristics for driver input: f = 64 kHz (128 kbits/sec), tr = tf < 10 ns, VIH = 3V, VIL = 0V, duty cycle = 50%. Note 6: Generator characteristics for receiver input: f = 64 kHz (128 kbits/sec), tr = tf = 200 ns, VIH = 3V, VIL = -3V, duty cycle = 50%. Note 7: Only one driver output shorted at a time. 3 www.national.com DS14C335 Electrical Characteristics (Notes 2, 3) DS14C335 Parameter Measurement Information 01173403 FIGURE 1. Driver Propagation Delay and Slew Rate Test Circuit 01173404 FIGURE 2. Driver Propagation Delay and Slew Rate Timing 01173405 FIGURE 3. Receiver Propagation Delay Test Circuit 01173406 FIGURE 4. Receiver Propagation Delay Timing 01173407 FIGURE 5. Driver SHUTDOWN (SD) Delay Test Circuit www.national.com 4 DS14C335 Parameter Measurement Information (Continued) 01173408 FIGURE 6. Driver SHUTDOWN (SD) Delay Timing 01173409 FIGURE 7. Receiver SHUTDOWN (SD) Delay Test Circuit 01173410 FIGURE 8. Receiver SHUTDOWN (SD) Delay Timing Pin Descriptions VCC (Pin 3). Power supply pin for the device, +3.3V ( 0.3V). V+ (Pin 1). Positive supply for TIA/EIA-232-E drivers. Recommended external capacitor -- 0.47 F (16V). This supply is not intended to be loaded externally. V- (Pin 25). Negative supply for TIA/EIA-232-E drivers. Recommended external capacitor -- 0.47 F (16V). This supply is not intended to be loaded externally. C1+, C1- (Pins 6, 24). External capacitor connection pins. Recommended capacitor -- 0.47 F (6.3V). C2+, C2- (Pins 2, 4). External capacitor connection pins. Recommended capacitor -- 0.47 F (16V). C3+, C3- (Pins 28, 26). External capacitor connection pins. Recommended capacitor -- 0.47 F (6.3V). SHUTDOWN (SD) (Pin 23). A High on the SHUTDOWN pin will lower the total ICC current to less than 10 A, providing a low power state. In this mode receiver R5 remains active. The SD pin should be driven or tied low (GND) to disable the shutdown mode. DIN 1-3 (Pins 7, 8, 9). Driver input pins are JEDEC 3.3V standard compatible. DOUT 1-3 (Pins 22, 21, 20). Driver output pins conform to TIA/ElA-232 -E levels. 5 www.national.com DS14C335 Pin Descriptions data lines are TXD and RXD and the control lines are RTS, DTR, DSR, DCD, CTS and RI. The DS14C335 is a 3 x 5 Driver/Receiver and offers a single chip solution for the DTE interface as shown in Figure 9. Ring Indicator (RI) is used to inform the DTE that an incoming call is coming from a remote DCE. When the DS14C335 is in SHUTDOWN (SD) mode, receiver five (R5) remains active and monitors RI circuit. This active receiver (R5) alerts the DTE to switch the DS14C335 from SHUTDOWN to active mode. (Continued) RIN 1-5 (Pins 19, 18, 17, 16, 15). Receiver input pins accept TIA/EIA-232-E input voltages ( 25V). Receivers guarantees hysteresis of TBD mV. Unused receiver input pins may be left open. Internal input resistor (5 k) pulls input LOW, providing a failsafe HIGH output. ROUT 1-5 (Pins 10, 11, 12, 13, 14). Receiver output pins are JEDEC 3.3V standard compatible. GND (Pin 27). Ground Pin. Application Information 9-PIN SERIAL PORT APPLICATION In a typical Data Terminal Equipment (DTE) to Data CircuitTerminating Equipment (DCE) 9-pin de-facto interface implementation, 2 data lines and 6 control lines are required. The 01173411 FIGURE 9. Typical DTE Application turer) concluded that the DS14C335 and it's DC-DC Convertor supplied adequate drive capability to power a typical PC mouse. The mouse tested was specified with the following conditions: 10 mA at +6V 5.0 mA at -6V Since driver current is limited, it is recommended that newer lower power mice be specified for battery powered applications. Using older high power mice is wasteful of precious battery charge. MOUSE DRIVING The DS14C335 was tested for drive current under the following mouse driving conditions: * Two driver outputs set at VOH and their outputs were tied together (paralleled), sourcing current to supply the V+ terminal of the mouse electronics * One driver output set at VOL to sink the current from the V- terminal of the mouse electronics * One receiver was used to accept data from the mouse * Power Supply Voltage (VCC): 3.0V to 3.6V Completion of the testing (performed by National's Data Transmission Applications Group and a major PC manufacEXTERNAL DC-DC CONVERTOR COMPONENTS The DS14C335 with it's unique DC-DC Convertor triples the power supply voltage (3.0V) to +9.3V and then inverts it to a -9V potential. This unique convertor ONLY requires 5 exterwww.national.com nal surface mount 0.47 F capacitors. The five identical components were chosen to simplify PCB layout and the procurement of components. The DS14C335's DC-DC Con6 mixed power supplied +3V/+5V applications. The Driver Input (DIN) and ShutDown (SD) input pins can directly accept full +5V levels without the need for any external components. The Receiver Output (ROUT) is specified at 2.4V minimum while sourcing 1 mA. This level is compatible with standard TTL thresholds. For a complete discussion on "Interoperation of the DS14C335 with +5V UARTs" please see National Application Note AN-876. (Continued) vertor also provides a larger signal swing (higher at RS-232 standard data rates) which translates to more noise margin for the rejection of ground potential differences, induced noise, and crosstalk compared to other DC-DC convertor schemes which only provide limited signal swing and limited noise margin. DC-DC CONVERTOR CAPACITORS The use of polarized capacitors is not required. However, if they are used, the polarity indicated in the DS14C335 Functional Diagram must be honored for proper operation. Surface mount capacitors or ceramic capacitors may be used, however, for optimal efficiency, capacitors with a low effective series resistance (ESR) should be used. Values in the low Ohms() is normally acceptable. POWER DISSIPATION IN REAL RS-232 APPLICATIONS The DS14C335 DC-DC Convertor uses special circuitry that helps limit the increase in power supply current as frequency increases. A complete description of power dissipation and calculations for RS-232 applications can be found in National Application Note AN-914 titled "Understanding Power Requirements in RS-232 Applications". Typical performance curves are also located in this datasheet for quick reference. INTEROPERATION WITH +5V UARTS The DS14C335 provides full RS-232 driver output levels and a single chip solution for the popular 9-pin defacto serial port. This device may be used in either pure +3V applications or Typical Performance Characteristics Supply Current vs Frequency vs Driver Loads Supply Current vs Frequency vs Driver Loads 01173412 01173413 Supply Current vs Frequency (Receiver) Supply Power vs Data Rate 01173414 01173415 7 www.national.com DS14C335 Application Information DS14C335 Typical Performance Characteristics (Continued) Driver Output vs Data Rate 01173416 www.national.com 8 DS14C335 +3.3V Supply TIA/EIA-232 3 x 5 Driver/Receiver Physical Dimensions inches (millimeters) unless otherwise noted Order Number DS14C335MSA NS Package Number MSA28 LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated