8 7 6 4 5 2 3 1 Recommended P.C. Board Layout SCALE 4:1 SINGLE ROW DOUBLE ROW Single Row Double Row Jump Middle Row Triple Row F Pin 1 F .100[2.54] .040 [1.02] .100[2.54] .040 [1.02] .100[2.54] Pin 1 Pin 1 Pin 1 .200 [5.08] .200 [5.08] .040 [1.02] E .040 [1.02] .100[2.54] E .100[2.54] JUMP MIDDLE ROW TRIPLE ROW Single Row SSHS-1 XX - X - XX - XX - XX - XX - LF (A) (B) (C ) (D) (E) (F) (G) APPLICATION .100[2.54]X No. of Positions+.020[0.50] .335 [8.51] LENGTH 01 A. Pins Per Row - 1 through 40 B. Row Specification - S= Single Row - D= Double Row - J= Jump Row - T= Triple Row C. Pin Options - See Pin Options below D. Plating Options - See Plating Options Below E. Lock Tight "LT" (Optional) - LT= Board locking feature. Leave blank if not needed. F. Polarized Position - Leave blank if not needed - If required, specify position to be empty e.g .012 for pin 12 G. LF= Lead Free .098[2.50] 40 .100[2.54] D TAIL .016[0.41] x.024[0.60] Double Row .100[2.54]X No. of Spaces 80 02 .197 .100 [2.54] [5.00] 79 G T GT H F FT 01 C Jump Middle Row 120 03 .200 [5.08] 119 01 Point of Contact .079[2.00] B Triple Row 120 PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Major League Electronics. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Major League Electronics IS PROHIBITED. 7 6 Specifications: Insertion Depth: .145(3.68) to .250(6.35) Insertion Force - Per Contact - H Plating: 6oz.(1.67N) avg with .025(0.64mm) sq. pin Withdrawal Force - Per Contact - H Plating: 5oz.(1.39N) avg with .025(0.64mm) sq. pin Current Rating: 3.0 Ampere Insulation Resistance: 1000M Ohms Min. Dielectric Withstanding: 600V AC Contact Resistance: 20M Ohms Max. Operation Temperature: -40C to +105C Max. Process Temperature Peak: 260C up to 20 secs. Process: 230C up to 60 secs. Wave: 260C up to 6 secs. Manual Solder: 350C up to 5 secs. UNLESS OTHERWISE SPECIFIED: 01 A 8 5 C Pin Options Length Tail Length .435[11.05mm] .100[2.54mm] .455[11.56mm] .120[3.05mm] .525[13.34mm] .190[4.83mm] .725[18.42mm] .390[9.91mm] .895[22.73mm] .560[14.22mm] 02 04 06 08 10 B Tails may be clipped to acheive specific dimensions. Products cut to specific sizes are uncancellable/ nonreturnable. Parts are subject to change without notice. .295 [7.50] 119 D Materials: Contact Material: Phosphor Bronze Insulator Material:Nylon 6T Plating: Au or Sn over 50u" (1.27) Ni Max. Insertion Depth .250[6.35] 03 Plating options -10 Gold on Contact Area/ Flash on Tail -Matte Tin all Over -10 Gold on Contact Area/ Matte Tin on Tail -30 Gold on Contact Area/ Matte Tin on Tail -Gold Flash over Entire Pin - Gold Flash on Contact Area/ Matte Tin on Tail Mates With: BSTC TSHCR BSTCM TSHCRE BSTCR TSHCRSM BSTCRSM TSHR BSTS TSHRE LBSTCM TSHS LTSHCR TSHSCM LTSHCRE TSHSM LTSHR ULTSHSM LTSHRE ULTSHC LTSHSM ULTSHCR TSHC 4 DIMENSIONS ARE IN INCHES TOLERENCES: ONE DECIMALS .100 TWO DECIMAL .100 THREE DECIMAL .005 FOUR DECIMAL .002 COMMENTS: 3 01/20/15 CHECKED GWE 01/20/15 A MFG APPR. INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL USED ON APPLICATION DATE EOW ENG APPR. FINISH NEXT ASSY NAME DRAWN ADDRESS: 2533 Centennial Blvd. Jeffersonville, In 47130 Phone: 812-670-4174 Fax: 812-670-4175 E-Mail: mle@mlelectronics.com DO NOT SCALE DRAWING 2 TITLE: SSHS-1 SERIES SIZE DWG. NO. REV B C SCALE: 4:1 SHEET 1 OF 1 1