TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com 15,000W Transient Voltage Suppressor DEVICES - High Reliability controlled devices - Unidirectional (A) and Bidirectional (CA) construction - Plastic encapsulated TVS series for Thru Hole mounting - Selections for 22.0 to 280 V standoff voltages (VWM) M15KP22A thru M15KP280CA, e3 LEVELS M, MA, MX, MXL FEATURES High reliability controlled devices with wafer fabrication and assembly lot traceability 100 % surge tested devices Suppresses transients up to 15 kW @ 10/1000 s and 100 kW @ 8/20 s (see Figure 1) Optional upscreening available by replacing M prefix with MA, MX or MXL prefixes. These prefixes specify various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS Compliant devices available by adding "e3" suffix 3 lot norm screening performed on Standby Current ID APPLICATIONS / BENEFITS CASE 5A (DO-204AR) Protection from switching transients and induced RF Fast response Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance: o Class 1,2,3,4: M15KP22A to M15KP280CA o Class 5: M15KP22A to M15KP280CA (short distance) o Class 5: M15KP22A to M15KP110CA (long distance) Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance: o Class 1 & 2: M15KP22A to M15KP280CA o Class 3: M15KP22A to M15KP240CA o Class 4: M15KP22A to M15KP120CA Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance: o Class 2: M15KP22A to M15KP220CA o Class 3: M15KP22A to M15KP110CA o Class 4: M15KP22A to M15KP54CA MAXIMUM RATINGS Peak Pulse Power dissipation at 25 C: 15,000 watts at 10/1000 s (also see Figures 1 and 2) with impulse repetition rate (duty factor) of 0.05 % or less tclamping (0 V to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -65 C to +150 C Thermal resistance: 20 C/W junction to lead, or 80C/W junction to ambient when mounted on FR4 PC board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm Steady-State Power dissipation: 6 watts at TL = 30oC, or 1.56 watts at TA = 25C when mounted on FR4 PC board described for thermal resistance Forward Surge: 200 Amps 8.3 ms half-sine wave for unidirectional devices only Solder temperatures: 260 C for 10 s (maximum) RF01011 Rev B, August 2010 High Reliability Product Group Page 1 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ MECHANICAL AND PACKAGING Void-free transfer molded thermosetting epoxy body meeting UL94V-0 requirements Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per MILSTD-750, method 2026 Body marked with part number Band denotes cathode. Bidirectional not marked. Available in Bulk or custom tape-and-reel packaging TAPE-AND-REEL standard per EIA-296 for axial package (add "TR" suffix to part number) Weight: 1.4 grams (approximate) PACKAGE DIMENSIONS CASE 5A Dimensions in inches SYMBOLS & DEFINITIONS Symbol VWM PPP VBR ID Definition Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current RF01011 Rev B, August 2010 IPP VC IBR Definition Peak Pulse Current Clamping Voltage Breakdown Current for VBR High Reliability Product Group Page 2 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ ELECTRICAL CHARACTERISTICS @ 25oC MICROSEMI PART NUMBER (Note 2) REVERSE STAND-OFF VOLTAGE VWM (Note 1) V M15KP22A M15KP24A M15KP26A M15KP28A M15KP30A M15KP33A M15KP36A M15KP40A M15KP43A M15KP45A M15KP48A M15KP51A M15KP54A M15KP58A M15KP60A M15KP64A M15KP70A M15KP75A M15KP78A M15KP85A M15KP90A M15KP100A M15KP110A M15KP120A M15KP130A M15KP150A M15KP160A M15KP170A M15KP180A M15KP200A M15KP220A M15KP240A M15KP260A M15KP280A 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 200 220 240 260 280 MINIMUM BREAKDOWN VOLTAGE VBR @ IBR V 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 200 222 245 267 289 311 MAXIMUM CLAMPING VOLTAGE VC @ IPP mA 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 MAXIMUM STANDBY CURRENT ID @ VWM MAXIMUM PEAK PULSE CURRENT IPP (FIG. 2) MAXIMUM VOLTAGE TEMPERATURE VARIATION V(BR) V A A mV/ C 37.1 40.7 44.0 47.5 50.7 54.8 59.7 65.8 69.7 73.0 77.7 82.8 87.5 94.0 97.3 104 114 122 126 137 146 162 178 193 209 243 259 275 291 322 356 388 419 452 500 150 50 25 15 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 404 369 341 316 296 274 251 228 215 205 193 181 171 160 154 144 132 123 119 109 103 93 84 78 72 62 58 55 52 47 42 39 36 33 24 27 29 31 34 38 41 46 50 52 56 60 63 68 71 76 83 89 93 102 109 121 133 145 157 183 195 207 219 243 269 293 317 342 NOTE 1: Transient Voltage Suppressors are normally selected with reverse "Standoff Voltage" VWM which should be equal to or greater than the dc or continuous peak operating voltage level. NOTE 2: For bidirectional construction, indicate a CA suffix after the part number. ** Consult factory for availability of the 17 and 18 Volt devices on a special order basis. S RF01011 Rev B, August 2010 High Reliability Product Group Page 3 of 4 TECHNICAL DATA SHEET Gort Road Business Park, Ennis, Co. Clare, Ireland. Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803 Website: http://www.microsemi.com ___________________________________________________________________________________________________________________________________ GRAPHS PPP Peak Pulse Power - kW Waveform Non-Repetitive tp - Pulse Time - sec Test waveform parameters: tr=10 s, tp=1000 s FIGURE 1 Peak Pulse Power vs. Pulse Time to 50% of Exponentially Decaying Pulse C - CAPACITANCE-PICOFARADS Peak Pulse Power (PPP) or continuous Power in Percent of 25oC Rating FIGURE 2 : Pulse Waveform FIGURE 2 V(BR) - BREAKDOWN VOLTAGE-VOLTS FIGURE 3 Typical Capacitance vs. Breakdown Voltage TL Lead Temperature oC FIGURE 4 Derating NOTE: For Bidirectional Construction, indicate a C or CA suffix after part number. Capacitance will be one-half that shown in Figure 3. RF01011 Rev B, August 2010 High Reliability Product Group Page 4 of 4