PLA140L Single-Pole, Normally Open, Current-Limiting OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 400 200 13 Units VP mA Features * * * * * * * * * * Current Limiting 3750Vrms Input/Output Isolation Small 6-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible) High Reliability Arc-Free With No Snubbing Circuits No EMI/RFI Generation Machine Insertable, Wave Solderable Surface Mount Tape & Reel Version Available Flammability Classification Rating of V-0 Description PLA140L is a single-pole, normally open (1-Form-A) solid state relay that uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS architecture. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED. The PLA140L also contains a built-in load current limiting feature. This combined with low on-resistance and very high load current handling capabilities makes it suitable for a variety of high performance switching applications. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * Automotive Ordering Information Part Number PLA140L PLA140LS PLA140LSTR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Control Do Not Use 1 6 2 5 3 4 Load Do Not Use Load DC Only Configuration + Control - Control Do Not Use 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% Pb RoHS 2002/95/EC DS-PLA140L-R05 10% ILOAD e3 ton www.clare.com toff 1 PLA140L Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 400 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Load Current Limit Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 2 Conditions Symbol Min Typ Max - IL t=10ms ILPK - - 200 350 500 ILEAK - 10 3 - 13 4 1 IF=5mA, TA=25C VL=50V, f=1MHz ton toff ICL COUT 240 - 65 5 3 380 - mA pF IL=200mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=200mA IF=350mA VL=400VP IF=5mA, VL=10V RON www.clare.com Units mA mA A ms R05 PLA140L PERFORMANCE DATA* 15 10 5 0.39 0.91 1.17 1.43 15 10 5 25 20 15 10 5 0 0.18 0.30 0.42 0.54 0.66 0.78 9.5 10.0 10.5 11.0 11.5 12.0 Turn-On (ms) Turn-Off (ms) On-Resistance () Typical IF for Switch Operation (N=50, IL=200mADC, TA=25C) Typical IF for Switch Dropout (N=50, IL=200mADC, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 25 15 10 5 35 30 20 Device Count (N) 20 15 10 5 1.5 2.1 2.7 3.9 3.3 25 20 15 10 5 0 0 0 0.9 4.5 1.5 2.1 2.7 3.3 430 3.9 442 454 478 466 LED Current (mA) LED Current (mA) Blocking Voltage (VP) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On vs. LED Forward Current (IL=200mADC) Typical Turn-Off vs. LED Forward Current (IL=200mADC) 30 Turn-On (ms) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Turn-Off (ms) 35 0 1.25 5 10 15 20 25 30 35 40 45 0.5 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 50 0 5 10 15 20 25 30 35 40 490 45 LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA) Typical LED Forward Voltage Drop vs. Temperature Typical Turn-On vs. Temperature (IL=200mADC) Typical Turn-Off vs. Temperature (IF=5mA, IL=200mADC) 2.5 1.6 2.0 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 0.8 Turn-On (ms) 1.8 0.7 1.5 I F =5mA 1.0 I F =10mA 0.5 -20 0 20 40 60 Temperature (C) 80 100 120 0.5 0.4 0.3 0.2 0.1 I F =20mA 0 0 -40 50 0.6 Turn-Off (ms) Device Count (N) 30 20 1.69 Device Count (N) Device Count (N) 25 0.65 Typical On-Resistance Distribution (N=50, IF=5mA, IL=200mADC, TA=25C) 35 0 0 LED Forward Voltage Drop (V) Typical Turn-Off Time (N=50, IF=5mA, IL=200mADC, TA=25C) Device Count (N) 20 25 Device Count (N) Device Count (N) 25 Typical Turn-On Time (N=50, IF=5mA, IL=200mADC, TA=25C) -40 -20 0 20 40 60 Temperature (C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.clare.com 3 PLA140L LED Current (mA) Load Current (mA) -40 -20 250 200 150 100 50 0 -50 -100 -150 -200 -250 -4.0 -3.0 0 20 40 60 80 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 100 -40 -20 0 20 40 60 80 Typical On-Resistance vs. Temperature (IF=5mA, IL=200mADC) 20 18 16 14 12 10 8 6 4 2 0 -40 100 -20 0 20 40 60 Temperature (C) Temperature (C) Temperature (C) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Typical Load Current vs. Temperature Typical Blocking Voltage vs. Temperature 300 80 100 80 100 485 250 200 I F =20mA I F =10mA I F =5mA 150 100 Blocking Voltage (VP) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 Typical IF for Switch Dropout vs. Temperature (IL=200mADC) On-Resistance () Typical IF for Switch Operation vs. Temperature (IL=200mADC) Load Current (mA) LED Current (mA) PERFORMANCE DATA* 480 475 470 465 460 455 450 50 -2.0 -1.0 0 1.0 2.0 3.0 445 -40 4.0 -20 0 20 40 60 100 120 -40 -20 0 Typical Leakage vs. Temperature Measured across Pins 4&6 20 40 60 Temperature (C) Temperature (C) Load Voltage (V) Energy Rating Curve 0.12 1.2 0.10 1.0 Load Current (A) Leakage (A) 80 0.08 0.06 0.04 0.8 0.6 0.4 0.2 0.02 0 -40 -20 0 20 40 60 80 100 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R05 PLA140L Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PLA140L / PLA140LS MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PLA140L / PLA140LS 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R05 RoHS 2002/95/EC e3 www.clare.com 5 PLA140L MECHANICAL DIMENSIONS PLA140L 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) PLA140LS 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.clare.com R05 PLA140L PLA140LS Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PLA140L-R05 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/13/2010