ECA Vishay Roederstein Aluminum Capacitors FEATURES * Polarized aluminum electrolytic capacitors * SMD style RoHS * High CU-product COMPLIANT * Miniature dimension * Reflow soldering * RoHS compliant QUICK REFERENCE DATA DESCRIPTION UNIT VALUE Nominal case size (O D x L ) mm 4 x 5.3 to 12.5 x 13.5 Rated capacitance range CR F 0.10 to 2200 Capacitance tolerance % 20 Rated voltage range V 6.3 to 100 Category temperature range C - 40 to + 85 Load life h 2000 Based on sectional specification APPLICATIONS * General use * Consumer electronics * Low-headroom, height restricted low mass units * Filtering, smoothing, coupling PACKAGING IEC 60384-4/EN 130300 Climatic category IEC 60068 * Supplied in blister tape 40/105/56 SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (O D x L in mm) RATED VOLTAGE (V) CR (F) 6.3 10 16 25 35 0.10 0.22 0.33 0.47 1.0 50 63 100 4 x 5.3 - - 4 x 5.3 - - 4 x 5.3 - - 4 x 5.3 - - 4 x 5.3 - - 2.2 4 x 5.3 5 x 5.3 3.3 4 x 5.3 6.3 x 5.8 4.7 10 22 33 47 68 100 5 x 5.3 220 330 6.3 x 7.7 5 x 5.3 4 x 5.3 5 x 5.3 6.3 x 5.8 5 x 5.3 6.3 x 5.8 8 x 10 5 x 5.3 6.3 x 5.3 8 x 6.2 8 x 10 5 x 5.3 6.3 x 5.3 6.3 x 7.7 8 x 10 10 x 10 6.3 x 5.3 8 x 6.2 8 x 10 10 x 10 12.5 x 13.5 6.3 x 5.3 8 x 6.2 8 x 10 10 x 10 12.5 x 13.5 6.3 x 7.7 8 x 10 10 x 10 12.5 x 13.5 - 8 x 10 10 x 10 12.5 x 13.5 - - 8 x 6.2 470 8 x 10 10 x 10 12.5 x 13.5 - - - 1000 8 x 10 10 x 10 12.5 x 13.5 - - - - 1500 10 x 10 12.5 x 13.5 - - - - - 2200 12.5 x 13.5 - - - - - - www.vishay.com 278 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 25018 Revision: 05-Jun-08 ECA Aluminum Capacitors Vishay Roederstein DIMENSIONS in millimeters CASE SIZE CODE D L A B C E R N P BB 4 0.5 5.3 0.2 1.9 0.2 4.3 0.2 4.3 0.2 1.0 0.2 0.5 ~ 0.8 0.3 0.5 BC 5 0.5 5.3 0.2 2.3 0.2 5.3 0.2 5.3 0.2 1.4 0.2 0.5 ~ 0.8 0.3 0.5 BD 6.3 0.5 5.3 0.3 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 ~ 0.8 0.3 0.5 AD 6.3 0.5 5.8 0.3 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 ~ 0.8 0.3 0.5 BM 6.3 0.5 7.7 0.4 2.4 0.2 6.6 0.2 6.6 0.2 2.2 0.2 0.5 ~ 0.8 0.3 0.5 AE 8 0.5 6.2 0.4 3.3 0.2 8.3 0.2 8.3 0.2 2.3 0.2 0.5 ~ 0.8 0.3 0.5 AF 8 0.5 10 0.5 2.9 0.2 8.3 0.2 8.3 0.2 3.1 0.2 0.8 ~ 1.1 0.3 0.5 AG 10 0.5 10 0.5 3.2 0.2 10.3 0.2 10.3 0.2 4.5 0.2 0.8 ~ 1.1 0.3 0.5 AH 12.5 0.5 13.5 0.5 4.6 0.2 12.8 0.2 12.8 0.2 4.5 0.2 1.1 ~ 1.4 0.3 0.5 AK 16 0.5 16.5 0.5 5.6 0.2 16.8 0.2 16.8 0.2 6.5 0.2 1.1 ~ 1.4 0.3 0.5 Capacitance N max. Plastic plateform C + Positive P max. A E A Voltage B Lot no. OD 22 A 50 + L ELECTRICAL DATA SYMBOL R - Negative ORDERING EXAMPLE DESCRIPTION UR rated voltage ECA 33 F/25 V, 20 %, size 5 x 5.3 mm CR rated capacitance at 120 Hz Ordering code: MALSECA00BC233EARK tan max. dissipation factor at 120 Hz RESR max. equivalent series resistance at 120 Hz IR rated alternating current at 120 Hz and upper catagory temperature For Standard Packaging Quantity (SPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service. Note Unless otherwise specified, all electrical values Tamb = 20 C, P = 80 to 120 kPa, RH = 45 to 75 %. apply at ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 CR 120 Hz (F) DIMENSIONS DxL (mm) 100 5 x 5.3 tan 120 Hz RESR 120 Hz () 0.28 3.71 IR 120 Hz/85 C (mA) 60 WEIGHT (g) CATALOG NUMBER 0.17 MALSECA00BC310BARK MALSECA00BM333BARK 330 6.3 x 7.7 0.35 1.41 188 0.40 1000 8 x 10 0.35 0.46 370 1.00 MALSECA00AF410BARK 1500 10 x 10 0.35 0.31 480 1.25 MALSECA00AG415BARK MALSECA00AE322CARK 220 8 x 6.2 0.24 1.45 175 0.55 470 8 x 10 0.24 0.68 290 1.00 MALSECA00AF347CARK 1000 10 x 10 0.24 0.32 454 1.25 MALSECA00AG410CARK 2200 12.5 x 13.5 0.24 0.14 960 2.50 MALSECA00AH422CARK Document Number: 25018 Revision: 05-Jun-08 For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 279 ECA Aluminum Capacitors Vishay Roederstein ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 120 Hz (F) DIMENSIONS DxL (mm) tan 120 Hz RESR 120 Hz () IR 120 Hz/85 C (mA) WEIGHT (g) CATALOG NUMBER MALSECA00BC247DARK 47 5 x 5.3 0.20 5.64 52 0.17 100 6.3 x 5.3 0.20 2.65 88 0.27 MALSECA00BD310DARK 220 6.3 x 7.7 0.24 1.45 162 0.40 MALSECA00BM322DARK 330 8 x 10 0.24 0.96 270 1.00 MALSECA00AF333DARK 1500 12.5 x 13.5 0.24 0.21 870 2.50 MALSECA00AH415DARK 16 22 5 x 5.3 0.13 7.84 41 0.17 MALSECA00BC222EARK 33 5 x 5.3 0.13 5.22 50 0.17 MALSECA00BC233EARK 47 6.3 x 5.3 0.13 3.67 70 0.27 MALSECA00BD247EARK 100 8 x 6.2 0.16 2.12 145 0.55 MALSECA00AE310EARK 220 8 x 10 0.16 0.96 232 1.00 MALSECA00AF322EARK 470 10 x 10 0.16 0.45 400 1.25 MALSECA00AG347EARK 1000 12.5 x 13.5 25 35 50 63 100 www.vishay.com 280 0.16 0.21 820 2.50 MALSECA00AH410EARK 0.15 19.9 27 0.12 MALSECA00BB210FARK 6.3 x 5.3 0.15 6.03 65 0.27 MALSECA00BD233FARK 8 x 6.2 0.15 4.23 105 0.55 MALSECA00AE247FARK 100 8 x 10 0.15 1.99 175 1.00 MALSECA00AF310FARK 330 10 x 10 0.15 0.60 360 1.25 MALSECA00AG333FARK 470 12.5 x 13.5 10 4 x 5.3 33 47 0.15 0.42 600 2.50 MALSECA00AH347FARK 0.10 4 x 5.3 0.10 1326 3.2 0.12 MALSECA00BB010HARK 0.22 4 x 5.3 0.10 602.9 4.7 0.12 MALSECA00BB022HARK 0.33 4 x 5.3 0.10 401.9 5.7 0.12 MALSECA00BB033HARK 0.47 4 x 5.3 0.10 282.2 6.8 0.12 MALSECA00BB047HARK 1.0 4 x 5.3 0.10 132.6 10 0.12 MALSECA00BB110HARK 2.2 4 x 5.3 0.10 60.3 15 0.12 MALSECA00BB122HARK 3.3 4 x 5.3 0.10 40.2 18 0.12 MALSECA00BB133HARK 4.7 5 x 5.3 0.10 28.2 25 0.17 MALSECA00BC147HARK 10 5 x 5.3 0.10 13.2 41 0.17 MALSECA00BC210HARK 22 6.3 x 5.3 0.10 6.03 71 0.27 MALSECA00BD222HARK 33 6.3 x 7.7 0.12 4.82 94 0.40 MALSECA00BM233HARK 47 8 x 10 0.12 3.39 140 1.00 MALSECA00AF247HARK 100 10 x 10 0.12 1.59 195 1.25 MALSECA00AG310HARK 220 10 x 10 0.12 0.72 320 1.25 MALSECA00AG322HARK 330 12.5 x 13.5 0.12 0.48 600 2.50 MALSECA00AH333HARK 10 6.3 x 5.8 0.12 15.9 46 0.30 MALSECA00AD210JARK 22 8 x 6.2 0.12 7.23 96 0.55 MALSECA00AE222JARK 33 8 x 10 0.12 4.82 117 1.00 MALSECA00AF233JARK 220 12.5 x 13.5 0.12 0.72 550 2.50 MALSECA00AH322JARK 2.2 5 x 5.3 0.12 72.35 20 0.17 MALSECA00BC122LARK 3.3 6.3 x 5.8 0.12 48.2 29 0.30 MALSECA00AD133LARK 4.7 6.3 x 5.8 0.12 33.9 35 0.30 MALSECA00AD147LARK 10 8 x 10 0.12 15.9 77 1.00 MALSECA00AF210LARK 22 8 x 10 0.12 7.23 100 1.00 MALSECA00AF222LARK 33 10 x 10 0.12 4.82 130 1.25 MALSECA00AG233LARK 47 10 x 10 0.12 3.39 155 1.25 MALSECA00AG247LARK 68 12.5 x 13.5 0.12 2.34 350 2.50 MALSECA00AH268LARK 100 12.5 x 13.5 0.12 1.59 420 2.50 MALSECA00AH310LARK For technical questions, contact: aluminumcaps1@vishay.com Document Number: 25018 Revision: 05-Jun-08 ECA Aluminum Capacitors Vishay Roederstein REFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS tP TP Critical Zone TL to TP Temperature Ramp-up TL tL Ts max. Ts min. Ramp-down ts Preheat t 25 C to Peak Time PROFILE FEATURE SOLDERING CONDITION O 4 ~ O 10 Average ramp-up rate (TL to TP) O 16 O 12.5 3 C/s max. 3 C/s max. Preheat Temperature min. (Ts min.) 150 C 150 C Temperature max. (Ts max.) 200 C 200 C Time (Ts min. to Ts max.) 60 ~ 150 s 40 ~ 100 s 40 ~ 120 s Ts max. to TL Ramp-up rate 3 C/s max. 3 C/s max. Time maintained above Temperature (TL) Time (tL) Peak/classification temperature (TP) 217 C 217 C 60 ~ 90 s 40 ~ 60 s 250 C Time within 5 C of actual peak temperature (TP) 230 C 240 C 10 s max. 10 s max. Ramp-down rate 3 C/s max. 3 C/s max. Time 25 C to peak temperature 8 min max. 8 min max. RESISTANCE TO SOLDERING HEAT Leakage current Capacitance value tan Document Number: 25018 Revision: 05-Jun-08 Less than specified value Within 10 % of initial value Less than specified value For technical questions, contact: aluminumcaps1@vishay.com www.vishay.com 281 ECA Aluminum Capacitors Vishay Roederstein LOW TEMPERATURE BEHAVIOR (at 120 Hz) IMPEDANCE RATIO (Z) T2/(Z) T1 RATED VOLTAGE (V) T2/T1 6.3 10 16 25 35 50 63 100 - 25 C/+ 20 C 5 4 3 2 2 2 2 2 - 40 C/+ 20 C 10 8 6 4 3 3 3 3 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Current Leakage current (Test conditions: UR, 20 C) After 2 minutes at UR IL2 0.01 x CR x UR or 3 A for UR 100 V (whichever is greater) Resistance Equivalent series resistance (ESR) Calculated from tan max. ESR = tan /2 f CR MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FOR UR 100 V FREQUENCY (Hz) 50 0.70 120 1.00 300 1.17 1000 1.36 10 000 1.50 TEST PROCEDURES AND REQUIREMENTS TEST PROCEDURE (QUICK REFERENCE) REQUIREMENTS Load life Tamb = 85 C UR and IR applied After 2000 h C/C: 20 % of initial value IL spec. limit tan 2 x spec. limit Shelf life No voltage applied After 1000 h After test: UR to be applied for 30 min 24 to 48 h before measurement C/C: 20 % of initial value IL spec. limit tan 2 x spec. limit www.vishay.com 282 For technical questions, contact: aluminumcaps1@vishay.com Document Number: 25018 Revision: 05-Jun-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000