Fiber Optic Detector OPF470 OPF470 * * * * * Electrically isolated plastic cap package High speed, low capacitance Designed to self align in the 0.228 diameter bore of standard fiber optic receptacles. Press fit simplified component installation 35MHz operation minimum The OPF470 is a low noise silicon PIN photodiode mounted in a low cost package for fiber optic applications. It offers fast response at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applications. The OPF470 is designed to be compatible with multimode optical fibers from 50/125 to 200/300 microns. Applications Industrial Ethernet equipment Copper-to-fiber media conversion Intra-system fiber optic links Video surveillance systems RoHS OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.-- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323- 2396 sensors@optekinc.com www.optekinc.com Issue A 8/2012 Page 1 of 3 Fiber Optic Detector OPF470 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -55 C to +115 C Operating Temperature Range -40 C to +100 C Lead Soldering Temperature(1) 260 C Continuous Power Dissipation (2) 200 mW Maximum Reverse Voltage 100 VDC Electrical/Optical Characteristics (TA = 25C unless otherwise noted) SYMBOL PARAMETER MIN TYP 0.45 0.55 MAX UNITS CONDITIONS A/W VR = 5.0V; 50/125m fiber; = 850nm R Responsivity ID Dark Current 0.1 p Peak Response Wavelength 905 nm tr Output Rise Time 6.0 ns VR = 15V; RL = 50, 10%-90% CT Total Capacitance 3.0 pF VR = 20V Field of View 80 deg FoV 5.0 nA VR = 5.0V Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. De-rate linearly at 2.13mW/C above 25C . OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 8/2012 Page 2 of 3 OPTEK Technology Inc.-- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323- 2396 sensors@optekinc.com www.optekinc.com Fiber Optic Detector OPF470 Mechanical Data DIMENSIONS ARE IN INCHES (MILLIMETERS) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc.-- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (800) 341-4747 FAX: (972) 323- 2396 sensors@optekinc.com www.optekinc.com Issue A 8/2012 Page 3 of 3