OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Issue A 8/2012
Page 1 of 3
Fiber Optic Detector
OPF470
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Applications
♦ Industrial Ethernet equipment
♦ Copper-to-fiber media conversion
♦ Intra-system fiber optic links
♦ Video surveillance systems
OPF470
• Electrically isolated plastic cap package
• High speed, low capacitance
• Designed to self align in the 0.228 diameter bore of stand-
ard fiber optic receptacles.
• Press fit simplified component installation
• 35MHz operation minimum
The OPF470 is a low noise sil icon PIN photodiode mounted in a lo w cost package for fiber optic applications. It offers fast re-
sponse at moderate bias and is compatible with LED and laser diode sources in the 800-1000 nm wavelength region. Low
capacitance improves signal to noise performance in typical short haul LA N applications.
The OPF470 is desig ned to be compatible with multimode optical fibers from 50/125 to 200/300 microns.
RoHS
Fiber Optic Detector
OPF470
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Issue A 8/2012
Page 2 of 3
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Electrical/Optical Characteristics (TA = 25°C unless otherwise noted)
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range -55° C to +115° C
Operating Temperature Range -40° C to +100° C
Lead Soldering Temperature(1) 260° C
Continuous Power Dissipation(2) 200 mW
Maximum Reverse Voltage 100 VDC
Notes:
1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended.
2. De-rate linearly at 2.13mW/°C above 25°C .
SYMBOL PARAMETER MIN TYP MAX UNITS CONDITIONS
R Responsivity 0.45 0.55 A/W VR = 5.0V; 50/125µm fiber; λ = 850nm
ID Dark Current 0.1 5.0 nA VR = 5.0V
λp Peak Response Wavelength 905 nm
tr Output Rise Time 6.0 ns VR = 15V; RL = 50Ω, 10%-90%
CT Total Capacitance 3.0 pF VR = 20V
FoV Field of View 80 deg
OPTEK Technology Inc.— 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (800) 341-4747 FAX: (972) 323– 2396 sensors@optekinc.com www.optekinc.com
Issue A 8/2012
Page 3 of 3
Fiber Optic Detector
OPF470
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Mechanical Data
DIMENSIONS ARE IN INCHES (MILLIMETERS)
