SRM-Series ALUMINUM ELECTROLYTIC CAPACITORS MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS Downsized, 5mm height, 85C SRM @Coating case covered products are also available @Downsized from current standard SRE series @5mm height, 1000-hours-life at 85C @Solvent-proof type (see PRECAUTIONS AND GUIDELINES) downsized SRE ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Shelf Life -40 to +85C 4 to 50Vdc P20% (M) (at 20C, 120Hz) I=0.01CV or 3MA, whichever is greater. Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes) 4V 6.3V 10V 16V 25V 35V 50V Rated voltage (Vdc) 0.40 0.38 0.30 0.23 0.17 0.15 0.13 tanE (Max.) (at 20C, 120Hz) Rated voltage (Vdc) 4V 6.3V 10V 16V 25V 35V 50V Z(-25C)/Z(+20C) 2 2 2 2 3 4 7 Z(-40C)/Z(+20C) 3 3 4 6 8 8 15 (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1000 hours at 85C. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 85C without voltage applied. Capacitance change [P20% of the initial value D.F. (tanE) [200% of the initial specified value Leakage current [The initial specified value FP0.5 fD fd F fD' L' FD' Fd Sleeve* FP0.3 ?DIMENSIONS (Radial Lead Type=VB) [mm] L' 15min. 4min. 3 0.4 1.0 5 4 8 6.3 0.45 0.45 0.45 0.45 1.5 2.0 2.5 2.5 FD+0.5max. L+1.0max. (F4 to F8) Gas escaped end seal (F3) *F8 : coating case ?PART NUMBERING SYSTEM SRM 10 VB 100 M Cap tolerance (P20%) Nominal cap code Radial lead type Rated voltage in volts Series name Capacitance 0.1MF 0.47MF 1.0MF 4.7MF 10MF 100MF Code R1 R47 1 4R7 10 100 ?STANDARD RATINGS Vdc mF 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 Note : 4 6.3 10 16 25 35 50 Case size FDBL (mm) Rated ripple current (mArms) at 85C, 120Hz 3B5 22 4B5 40 4B5 5B5 6.3B5 6.3B5 8B5 55 88 8B5 36 3B5 4B5 5B5 5B5 78 148 18 33 47 55 3B5 4B5 5B5 13 25 41 6.3B5 8B5 63 116 3B5 12 6.3B5 8B5 56 85 3B5 3B5 3B5 3B5 3B5 3B5 4B5 4B5 5B5 6.3B5 8B5 1.3 2.9 4.2 5.0 7.2 10 14 19 31 49 76 141 Use next higher voltage part. (1/1) CAT. No. E1001D