© Semiconductor Components Industries, LLC, 2010
July, 2019 − Rev. 4
1Publication Order Number:
ES1D/D
ES1A-ES1D
1.0 A Ultra Fast Recovery
Rectifier
Features
•For Surface Mount Applications
•Glass Passivated Junction
•Low Profile Package
•Easy Pick and Place
•Built−in Strain Relief
•Superfast Recovery Times for High Efficiency
•This Device is Pb−Free and is RoHS Compliant
Applications
•This Product is General Usage and Suitable for Many Different
Applications
www.onsemi.com
MARKING DIAGRAM
SMA
CASE 403AE
(COLOR BAND DENOTES CATHODE)
$Y = ON Semiconductor Logo
&Z = Assembly Plant Code
&3 = Data Code (Year & Week)
ES1X = Specific Device Code
X = A/B/C/D
See detailed ordering and shipping information on page 2 of
this data sheet.
ORDERING INFORMATION
$Y&Z&3
ES1X
ES1A−ES1D
www.onsemi.com
2
ABSOLUTE MAXIMUM RATINGS TA = 25°C Unless Otherwise Noted
Symbol Parameter
Value
Units
1A 1B 1C 1D
VRRM Maximum Repetitive Reverse Voltage 50 100 150 200 V
IF(AV) Average Rectified Forward Current, @ TA = 120°C 1.0 A
IFSM Non−repetitive Peak Forward Surge Current
8.3 ms Single Half−Sine−Wave
30 A
Tstg Storage Temperature Range −50 to +150 °C
TJm Operating Junction Temperature −50 to +150 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Symbol Parameter Value Units
PDPower Dissipation 1.47 W
RθJA Thermal Resistance, Junction to Ambient* 85 °C/W
RqJL Thermal Resistance, Junction to Lead* 35 °C/W
*Device mounted on FR−4 PCB 0.013 mm.
ELECTRICAL CHARACTERISTICS TJ = 25°C Unless Otherwise Noted
Symbol Parameter
Device
Units
1A 1B 1C 1D
VFForward Voltage @ 1.0 A 0.92 V
trr Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A
15 ns
IRReverse Current @ rated VR
TA = 25_C
TA = 100_C
5.0
100
mA
CTTotal Capacitance
VR = 4.0 V, f = 1.0 MHz
7.0 pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
PACKAGE MARKING AND ORDERING INFORMATION TBD
Device Marking Device Package Quantity†
ESD1 ESD1 SMA 7500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ES1A−ES1D
www.onsemi.com
3
TYPICAL CHARACTERISTICS
Figure 1. Forward Current Derating Curve Figure 2. Forward Voltage Characteristics
Figure 3. Non−Repetitive Surge Current Figure 4. Reverse Current vs Reverse Voltage
Figure 5. Total Capacitance
1
0
5
10
15
20
25
30
0.4 0.6 0.8 1 1.2 1.4
0.001
0.01
0.1
1
10
Pulse Width = 300 ms
2% Duty Cycle
0
0.1
1
10
100
1000
Percent of Rated Peak Reverse Voltage [%]
025
0
0.2 5
0.5
0.75
1
1.25
1.5
RESISTIVE OR
INDUCTIVE LOAD
P.C.B. MOUNTED
ON 0.2 x 0.2”
(5.0 x 5.0 mm)
COPPER PAD AREAS
0.1 1 10 100
0
2
4
6
8
10
12
14
50 75 100 125 150 175
Average Rectified Forward Current, IF [A]
Ambient Temperature [5C]
TA = 25°C
Forward Current, IF [A]
Forward Voltage, VF [V]
Peak Forward Surge Current, IFSM [A]
Number of Cycles at 60 Hz
20 40 60 80 100 120 140
TA = 125°C
TA = 75°C
TA = 25°C
Reverse Current, IR [mA]
2 5 10 20 50 100
Total Capacitance, CT [pF]
Reverse Voltage, VR [V]
ES1A−ES1D
www.onsemi.com
4
TYPICAL CHARACTERISTICS (continued)
Figure 6. Reverse Recovery Time Characterstic and Test Circuit Diagram
Pulse
Generator
(Note 2)
DUT
(−)
(+)
OSCILLOSCOPE
(Note 1)
50 W
NONINDUCTIVE
50 V
(approx)
1. Rise time = 7.0 ns max; Input impedance = 1.0 MW 22 pf.
2. Rise time = 10 ns max; Source impedance = 50 W.
1.0 cm SET TIME BASE FOR
trr
+0.5 A
0
−0.25 A
−1.0 A
5/ 10 ns/ cm
50 W
NONINDUCTIVE
50 W
NONINDUCTIVE
NOTES:
SMA
CASE 403AE
ISSUE O
DATE 31 AUG 2016
2.65
4.30
1.75
2.50 MAX
2.20
1.90
0.30
0.05
B0.203
0.050
2.05
1.95
A
C
B1.65
1.20
2.95
2.50
B5.60
4.80
B4.75
4.00
A
B
0.41
0.15
1.52
0.75
R0.15 4X
8
0
0.45
8
0
DETAIL A
SCALE 20 : 1
GAGE PLANE
NOTES:
A. EXCEPT WHERE NOTED, CONFORMS
TO JEDEC DO214 VARIATION AC.
BDOES NOT COMPLY JEDEC STANDARD
VALUE.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONS ARE EXCLUSIVE OF
BURRS, MOLD FLASH AND TIE BAR
PROTRUSIONS.
E. DIMENSIONS AND TOLERANCE AS
PER ASME Y14.5−2009.
E. LAND PATTERN STD. DIOM5025X231M
LAND PATTERN RECOMMENDATION
TOP VIEW
SIDE VIEW
0.13 MCBA
0.13 MCBA
°
°
°
°
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13440G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
SMA
© Semiconductor Components Industries, LLC, 2019 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
