TaNFilm(R) Small Outline Surface Mount Resistor Network IRC Advanced Film Division Ultra precision tantalum nitride resistance element on high purity alumina GUB Series * * * * * Compliant leads to compensate for thermal expansion and contractions Thin film on ceramic technology 0.220" and 0.300" sizes available RoHS compliant version available DESC 87012 and 87013 available Standard JEDEC packages for automatic placement equipment Rugged, molded construction IRC's TaNFilm(R), Small Outline Integrated Circuit resistor networks are ideally suited for surface mounting. The 0.05 inch lead spacing provides higher lead density, increased component count, lower installed resistor cost, and better reliability. They are ideally suited for the latest surface mount assembly techniques, and each lead can be 100% visually inspected. The compliant leads relieve thermal expansion and contraction stressed created by soldering and temperature excursions. The tantalum nitride film system provides precision tolerance, exceptional TCR tracking, and low noise. TaNFilm(R) provides stability, high reliability, and long life characteristics. Testing has demonstrated performance exceeding MIL-PRF-83401 characteristics H. Electrical Data GM Type Schem A: 10 to 150K Schem B: 10 to 75K GL Type Schem A: 10 to 200K Schem B: 10 to 100K Resistance Range () Absolute Tolerance Available to 0.1% Ratio Tolerance To R1 Available to 0.05% TCR (ppm/C) TCR Tracking To R1 (ppm/C) 25, 50, 100 5 Operating Temperature Range -55C to +125C Noise Less than -25 dB Substrate High purity alumina substrate Custom circuits and special testing available. General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com A subsidiary of TT electronics plc GUB Series November 2007 TaNFilm(R) Small Outline Surface Mount Resistor Network IRC Advanced Film Division Physical Data GM7x GM8x GL8x GL0x A 0.390" 0.005 0.440" 0.005 0.440" 0.005 0.504" 0.008 B 0.220" 0.005 0.220" 0.005 0.297" 0.005 0.297" 0.005 C 0.090" max 0.090" max 0.105" max 0.105" max E 0.300" 0.010 0.300" 0.010 0.407" 0.015 0.407" 0.015 F 0.028" 0.007 0.028" 0.007 0.028" 0.007 0.028" 0.007 G 0.010" 0.002 0.010" 0.002 0.010" 0.002 0.010" 0.002 J 0.017" 0.003 0.017" 0.003 0.017" 0.003 0.017" 0.003 K 0.050" 0.005 0.050" 0.005 0.050" 0.005 0.050" 0.005 Power Dissipation Data (watts @ 70C) Schematic A Schematic B Per Resistor Per Package Per Resistor Per Package GM Series 14-pin 0.16W 1.0W 0.08W 1.0W GM Series 16-pin 0.16W 1.2W 0.08W 1.2W GL Series 16-pin 0.16W 1.2W 0.10W 1.2W GL Series 20-pin 0.16W 1.5W 0.10W 1.5W (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com GUB Series Issue November 2007 TaNFilm(R) Small Outline Surface Mount Resistor Network IRC Advanced Film Division Standard Circuits N N R1 R1 1 2 3 1 2 3 Schematic A Isolated Schematic B Bussed (highest number pin is common) Note: N=number of pads Ordering Data Prefix GUB - GM8A - 03 - 2001 - B - A Model: GM7A - 14-pin 0.220" wide body, schematic A, 60/40 Sn/Pb leads GM7ALF - 14-pin, 0.220" wide body, schematic A, RoHS compliant leads GM7B - 14-pin 0.220" wide body, schematic B, 60/40 Sn/Pb leads GM7BLF - 14-pin, 0.220" wide body, schematic B, RoHS compliant leads GM8A - 16-pin 0.220" wide body, schematic A, 60/40 Sn/Pb leads GM8ALF - 16-pin, 0.220" wide body, schematic A, RoHS compliant leads GM8B - 16-pin 0.220" wide body, schematic B, 60/40 Sn/Pb leads GM8BLF - 16-pin, 0.220" wide body, schematic B, RoHS compliant leads GL8A - 16-pin 0.300" wide body, schematic A, 60/40 Sn/Pb leads GL8ALF - 16-pin, 0.300" wide body, schematic A, RoHS compliant leads GL8B - 16-pin 300" wide body, schematic B, 60/40 Sn/Pb leads GL8BLF - 16-pin, 0.300" wide body, schematic B, RoHS compliant leads GL0A -20-pin 0.300" wide body, schematic A, 60/40 Sn/Pb leads GL0ALF - 20-pin, 0.300" wide body, schematic A, RoHS compliant leads GL0B-20-pin 0.300" wide body, schematic B, 60/40 Sn/Pb leads GL0BLF - 20-pin, 0.300" wide body, schematic B, RoHS compliant leads TCR Code (ppm/C): 01 = 100; 02 = 50; 03 = 25 Resistance code: Standard MIL resistance code (e.g. 1002 = 10K; 50R1=50.1) Absolute tolerance: F = 1%; D = 0.5%; C = 0.25%; B = 0.10% Ratio tolerance to R1 (if specified) F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com GUB Series Issue November 2007 IRC Advanced Film Division (c) IRC Advanced Film Division * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Email: afdsales@irctt.com * Website: www.irctt.com GUB Series Issue November 2007