Thin Film, Rectangular, Resistor Chips
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 20028
144 Revision: 15-Sep-06
M10, M11, M12, M25
Vishay Draloric
FEATURES
•Metal film layer on high quality ceramic
•Protective top coat
•Pure tin on nickel barrier layer
•Low temperature coefficient and tight tolerances (± 0.1 %;
± 10 ppm/K)
•56 days at 40 °C and 93 % relative humidity down to
≤ ± 0.2 %
RoHS
COMPLIANT
* Higher values on request, ask about extended value ranges
•Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
•Marking: 4 digits, M10 - no marking
1) Measuring conditions in acc. with EN 140 401-801 2) Rated voltage:
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE POWER RATING
P70 °C LIMITING ELEMENT
VOLTAGE MAX
V≅
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
Ω
E-SERIES
INCH METRIC EN 140
401-801
EIA
575
M10 0402 1005 0.063 0.063 25 ± 25; ± 50 ± 0.5; ± 1 10R - 20K*)24 - 96
M11 0603 1608 0.1 0.063 75
± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 56K*)
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 56K*)
± 1 1R0 - 100K*)
M12 0805 2012 0.125 0.1 150
± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 100K*)
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 100K*)
± 1 1R0 - 220K*)
M25 1206 3216 0.25 0.125 200
± 25 ± 0.1; ± 0.25;
± 0.5; ± 1 10R - 220K*)
24 - 96
± 50 ± 0.1; ± 0.25; ± 0.5; 10R - 220K*)
± 1 1R0 - 330K*)
TECHNICAL SPECIFICATIONS
PARAMETER UNIT M10 M11 M12 M25
Rated Dissipation at 70 °C
(EN 140 401-801| EIA 575) W 0.063 0.1 0.063 0.125 0.1 0.25 0.125
Limiting Element Voltage2) V≅25 75 150 200
Insulation Voltage (1 min) Vdc/ac peak > 50 > 100 > 200 > 300
Thermal Resistance1) K/W ≤ 8701) -≤ 5501) -≤ 4401) -≤ 2201) -
Insulation Resistance Ω> 10 9
Category Temperature Range °C - 55 to + 125 (+ 155)
Failure Rate h-1 0.3 • 10-9
Weight/1000 pcs g 0.65 2 5.5 10
PR×
Document Number: 20028 For technical questions contact: ff3aresistors@vishay.com www.vishay.com
Revision: 15-Sep-06 145
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
DIMENSIONS
SIZE DIMENSIONS [in millimeters]
INCH METRIC L W H T1 T2
0402 1005 1.0 ± 0.05 0.5 ± 0.05 0.35 ± 0.05 0.25 ± 0.1 0.2 ± 0.1
0603 1608 1.55 0.85 ± 0.1 0.45 ± 0.05 0.30 ± 0.2 0.3 ± 0.2
0805 2012 2.0 1.25 ± 0.15 0.45 ± 0.05 0.30 0.3 ± 0.2
1206 3216 3.2 1.6 ± 0.15 0.55 ± 0.05 0.45 ± 0.2 0.4 ± 0.2
SOLDER PAD DIMENSIONS [in millimeters]
SIZE REFLOW WAVE SOLDERING
INCH METRIC a b l a b l
0402 1005 0.4 0.6 0.5
0603 1608 0.5 0.9 1.0 0.9 0.9 1.0
0805 2012 0.7 1.4 1.2 0.9 1.3 1.3
1206 3216 0.9 1.7 2.0 1.1 1.7 2.3
NOTE: Products can be ordered using either the Product Description or the Part Number.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBERING: M1004020D5620DP000
MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACKAGING SPECIAL
M100402
M110603
M120805
M251206
0 = Neutral D = ± 25 ppm/K
C = ± 50 ppm/K
3 digit value
1 digit multiplier
Multiplier
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
B = ± 0.1 %
C = ± 0.25 %
D = ± 0.5 %
F = ± 1 %
P0
P1
P5
PN
PZ
up to 2 digits
00 = standard
PRODUCT DESCRIPTION: M10 25 562R 0.5 % P0
M10 25 562R 0.5 % P0
MODEL TCR RESISTANCE VALUE TOLERANCE PACK AG I N G 1)
M10
M11
M12
M25
± 25 ppm/K
± 50 ppm/K
49K9 = 49.9 kΩ
5R1 = 5.1 Ω
± 0.1 %
± 0.25 %
± 0.5 %
± 1 %
P0
P1
P5
PN
PZ
1) Please refer to table PACKAGING, page 146.
+ 0.10
- 0.05
+ 0.20
- 0.10
+ 0.10
- 0.20
+ 0.20
- 0.10
M 01 0 0 4 0 2 0 D 5 6 2 0 D P 0 0
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 20028
146 Revision: 15-Sep-06
M10, M11, M12, M25
Vishay Draloric Thin Film, Rectangular, Resistor Chips
1) For ≤ TCR 25 ppm/K and Tolerance ≤ 0.1 % only.
PACKAGING
MODEL
REEL
TAPE WIDTH DIAMETER PIECES/REEL PACKING CODE
PAPER
M10 8 mm
180 mm/7"
330 mm/13"
10 000
50 000
P0
PZ
M11
M12
M25
8 mm
180 mm/7"
180 mm/7"
330 mm/13"
10001)
5000
20 000
P1
P5
PN
Temperature Rise
90
80
70
60
50
40
30
20
10
00 0.1 0.2 0.3 0.4 0.5
Power in W
0402 1206
08050603
Temperature in Rise in °C
Derating
120
100
80
60
40
20
0
- 55 -25 0 25 50 75 100 125 150 175
Ambient Temperature in °C
70
Rated Power in %
120
110
100
90
80
70
60
10 100 1K 10K 100K
Non-Linearity
Non-Linearity A
3
in dB
Resistance Value in Ω
M10
M25
M12
M11
3
2
1
Current Noise
Current Noise in µV/V
Resistance Value in Ω
0.5
0.3
0.1
0.01
0.03
0.05
100 1K 10K 100K 1M
M10 M11 M12 M25
Document Number: 20028 For technical questions contact: ff3aresistors@vishay.com www.vishay.com
Revision: 15-Sep-06 147
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
60
40
20
0
- 20
- 40
- 60
- 80
HF Performance
Phase Angle in ϑ°
Frequency f in MHz
2 5 10 50 100 500 1000
10K Ω
4.75K Ω
1K Ω
100 Ω
10 Ω
M11
60
40
20
0
- 20
- 40
- 60
- 80
HF Performance Frequency f in MHz
2 5 10 50 100 500 1000
[Z]-RO in %
RO
10 Ω
100 Ω100 Ω100 Ω100 Ω
100 Ω
1K Ω
4.75K Ω
10K Ω
M11
HF Performance
Phase Angle in ϑ°
60
40
20
0
- 20
- 40
- 60
- 80
Frequency f in MHz
2 5 10 50 100 500 1000
M12
10 Ω
100 Ω
1K Ω
10K Ω
60
40
20
0
- 20
- 40
- 60
- 80
HF Performance Frequency f in MHz
2 5 10 50 100 500 1000
[Z]-RO in %
RO
10 Ω
100 Ω
1K Ω
M12
10K Ω
1K
100
10
Single-Pulse High Voltage Overload Test
1.2 / 50 µ s EN140000 4.27
Test Voltage in V
Resistance Value in Ω
10R 100R 1K 10K 100K
3K
M12
M11
1K
100
10
Single-Pulse High Voltage Overload Test
10 / 700 µs EN140000 4.27
Test Voltage in V
Resistance Value in Ω
10R 100R 1K 10K 100K
3K
M12
M11
www.vishay.com For technical questions contact: ff3aresistors@vishay.com Document Number: 20028
148 Revision: 15-Sep-06
M10, M11, M12, M25
Vishay Draloric Thin Film, Rectangular, Resistor Chips
10
1
0.1
Pulse Rating P 0
Power Rating P in W
Square Pulse ti in s
10-5 10-4 10-3 10-2 10-1 110
100
0.01
Secondary conditions:
a) P 0 (peak pulse, single pulse)
b) ϑu ≤ 70 ° C
C) Umax see diagram (Max pulse voltage)
M25
M10
M12
M11
1
0.1
Square Pulse ti in s
10-5 10-4 10-3 10-2 10-1 110
0.01
Pulse Rating P ≤ P70
10
100
Power Rating P in W
Secondary conditions:
a) P ≤ P70 (permissible constant power at ϑu = 70 ° C)
b) ϑu ≤ 70 ° C
c) Umax see diagram (Max pulse voltage)
M10
M11
M12
M25
Square Pulse ti in s
10-5 10-4 10-3 10-2 10-1 110
Maximum Pulse Voltage
1000
Pulse Voltage
Ü
max in V
800
600
400
200
0
M25
M12
M11
M10
Secondary conditions:
a) P see diagram (pulse Rating)
b) ϑu ≤ 70 ° C
PERFORMANCE
TEST CONDITIONS OF TEST
TEST RESULTS
TOLERANCES
± 0.1 %/± 0.25 % ± 0.5 %/± 1.0 %
Endurance Test at 70 °C
IEC 60115-1 4.25.1 1000 hours at 70 °C, 1.5 hours “ON”, 0.5 hours “OFF” ≤ ± 0.2 % ≤ ± 0.5 %
Endurance at UCT
IEC 60115-1 4.25.3 1000 hours at 125 °C without load ≤ ± 0.2 % ≤ ± 0.5 %
Overload Test
IEC 60115-1 4.13
Short time overload for 2 seconds
2.5 x rated voltage or ≤ 2 x limiting element voltage ≤ ± 0.05 % ≤ ± 0.1 %
Thermal Shock
IEC 60115-1 4.19, IEC
60068-2-14
Rapid change between upper and lower
category temperature ≤ ± 0.05 % ≤ ± 0.1 %
Damp Heat Steady State
IEC 60115-1 4.24, IEC 60068-2-3 56 days at 40 °C and 93 % relative humidity ≤ ± 0.2 % ≤ ± 0.5 %
Resistance to Soldering Heat
IEC 60115-1 4.18, IEC 60068-2-20 10 seconds at 260 °C solder bath temperature ≤ ± 0.05 % ≤ ± 0.2 %
Document Number: 20028 For technical questions contact: ff3aresistors@vishay.com www.vishay.com
Revision: 15-Sep-06 149
M10, M11, M12, M25
Thin Film, Rectangular, Resistor Chips Vishay Draloric
APPLICABLE SPECIFICATIONS
• CECC40000/40400/40401-801
• EN140400/IEC 60115 - 1/EN 140 401-801
Legal Disclaimer Notice
Vishay
Document Number: 91000 www.vishay.com
Revision: 08-Apr-05 1
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
