OPI-110 Series Optically Coupled Isolators BASEEFA CERTIFIED The OPI-110, A/B/C and D are a family of optically coupled isolators, each consisting of a near infrared light emitting diode, coupled to an NPN silicon phototransistor sealed in an injection moulded plastic housing. This series is designed for applications requiring high voltage isolation between input and output or IS applications. All electrical parameters are 100% tested by manufacturing. Specifications are guaranteed to a 0.65% AQL. * 10 KV electrical rating * High current transfer ratio- 100% min @ 1mA If. * BASEEFA Certified MECHANICAL DATA Notch Indicates Pin 1 13.9 12.7 5.84 (0.23) 5.59 (0.22) (1) (4) (2) (3) 2.54 (0.100) 0.5 Square 6.6 (0.26) 6.1 (0.24) 7.62 Min (1) (4) (2) (3) BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 18.1.00 ISS A OPI-110 SERIES ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted) INPUT DIODE FORWARD DC CURRENT REVERSE DC VOLTAGE POWER DISSIPATION 50mA (3) 2V 100mW (4) OUTPUT PHOTOTRANSISTOR COLLECTOR-EMITTER VOLTAGE EMITTER-COLLECTOR VOLTAGE POWER DISSIPATION 30 V 5V 100 mW (5) OPERATING TEMP -40OC TO +85OC STORAGE TEMP -40OC TO +85OC INPUT-TO-OUTPUT ISOLATION VOLTAGE LEAD S0LDERING TEMP (2) (1.6mm) from case for 5sec with +10KV DC (1) 240OC soldering iron) NOTES 1 Measured with input diode leads shorted together and output leads shorted together. 2 RMA Flux is recommended. Duration can be extened to 10 sec. max. when flow soldering. 3 Derate linearly 0.73 mA/ C above 25 C 4 Derate linearly 1.67 mA/ C above 25 C 5 Derate linearly 1.67 mA/ C above 25 C Whilst the devices are capable of operating continually at the noted elevated temperatures users should be aware of the possibility of a reduction in CTR over long periods at high temperatures & currents. BASEEFA APPROVED Certificate Number BAS No. Ex89C2096U EEx BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 18.1.00 ISS A. OPI-110 SERIES OPTO ELECTRONIC DATA (TA = 25 C) O PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDISTIONS INPUT DIODE Forward Voltage VF 1.5 V If = 20mA Reverse Current IR 100 uA Vr = 2V OUTPUT PHOTOTRANSISTOR Collector-Emitter Breakdown Voltage V(BR)CEO 30 V Ic = 1mA If = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 5 V Ie = 100uA nA Vce = 10V Collector-Emitter Dark Current 100 ICEO COUPLED CHARACTERISTICS DC Current transfer ratio IC/IF OPI 110A 25 % If=10mA, Vce=5V OPI 110B 50 % If=10mA, Vce=5V OPI 110C 100 % If=10mA, Vce=5V OPI 110D 100 % If=1mA, Vce=5V 10 KV See Note (1) V If=10mA, Ic=1.6mA Isolation Voltage VISO Collector-emitter saturation voltage 0.4 VCE(SAT) Turn-on time t on 5 uS Ic=10mA, Vcc=10V, RL=100ohm Turn-off time t off 5 uS Ic=10mA, Vcc=10V, RL=100ohm NOTE: Measured with input diode leads shorted together and output leads shorted together. (Sample testing only). OPTO ELECTRONIC SOLUTIONS BEDFORD OPTO TECHNOLOGY LTD LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk 18.1.00 ISS A