2.54 (0.100)
6.6 (0.26)
6.1 (0.24)
5.84 (0.23)
5.59 (0.22)
(1)
(2) (3)
(4)
Notch Indicates Pin 1
(1)
(2) (3)
(4)
13.9
0.5 Square
7.62 Min
12.7
OPI-110 Series
Optically Coupled Isolators
BASEEFA CERTIFIED
The OPI-110, A/B/C and D are a family of
optically coupled isolators, each consisting of
a near infrared light emitting diode, coupled
to an NPN silicon phototransistor sealed in an
injection moulded plastic housing. This series
is designed for applications requiring high
voltage isolation between input and output or
IS applications.
All electrical parameters are 100% tested by
manufacturing. Specifications are guaranteed
to a 0.65% AQL.
•10 KV electrical rating
•High current transfer ratio- 100% min
@ 1mA If.
•BASEEFA Certified
MECHANICAL DATA
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
18.1.00 ISS A
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
BASEEFA APPROVED
Certificate Number
BAS No. Ex89C2096U EEx
ABSOLUTE MAXIMUM RATINGS (25OC unless otherwise noted)
INPUT DIODE
FORWARD DC CURRENT
REVERSE DC VOLTAGE
POWER DISSIPATION
50mA (3)
2V
100mW (4)
OUTPUT PHOTOTRANSISTOR
COLLECTOR-EMITTER VOLTAGE
EMITTER-COLLECTOR VOLTAGE
POWER DISSIPATION
30 V
5V
100 mW (5)
OPERATING TEMP -40OC TO +85OC
STORAGE TEMP -40OC TO +85OC
INPUT-TO-OUTPUT ISOLATION VOLTAGE +10KV DC (1)
LEAD S0LDERING TEMP (2) (1.6mm) from case for 5sec with
soldering iron) 240OC
NOTES
1Measured with input diode leads shorted together and output leads shorted together.
2RMA Flux is recommended. Duration can be extened to 10 sec. max. when flow
soldering.
3Derate linearly 0.73 mA/ C above 25 C
4Derate linearly 1.67 mA/ C above 25 C
5Derate linearly 1.67 mA/ C above 25 C
Whilst the devices are capable of operating continually at the noted elevated
temperatures users should be aware of the possibility of a reduction in CTR over
long periods at high temperatures & currents.
OPI-110
SERIES
18.1.00 ISS A.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDIS-
TIONS
INPUT DIODE
Forward Voltage VF 1.5 V If = 20mA
Reverse Current IR 100 uA Vr = 2V
OUTPUT PHOTOTRANSISTOR
Collector-Emitter Breakdown
Voltage V(BR)CEO 30 V Ic = 1mA If = 0
Emitter-Collector Breakdown
Voltage V(BR)ECO 5 V Ie = 100uA
Collector-Emitter Dark Current ICEO 100 nA Vce = 10V
COUPLED CHARACTERISTICS
DC Current transfer ratio IC/IF
OPI 110A 25 % If=10mA,
Vce=5V
OPI 110B 50 % If=10mA,
Vce=5V
OPI 110C 100 % If=10mA,
Vce=5V
OPI 110D 100 % If=1mA, Vce=5V
Isolation Voltage VISO 10 KV See Note (1)
Collector-emitter saturation volt-
age VCE(SAT) 0.4 V If=10mA,
Ic=1.6mA
Turn-on time t on 5 uS Ic=10mA,
Vcc=10V,
RL=100ohm
Turn-off time t off 5 uS Ic=10mA,
Vcc=10V,
RL=100ohm
OPTO ELECTRONIC DATA (TA = 25OC)
BEDFORD OPTO TECHNOLOGY LTD
LINDSAYLANDS, BIGGAR,LANARKSHIRE, ML12 6NR
Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009
Website: bot.co.uk E-mail: bill@bot.co.uk
NOTE:
Measured with input diode leads shorted together and output leads shorted together.
(Sample testing only).
OPI-110
SERIES
18.1.00 ISS A
OPTO ELECTRONIC SOLUTIONS
