PCB_E002-E064_GB 04.11.2003 15:01 Uhr Seite E.58 IDC connection socket connectors BLIDC 5.08 Omnimate Range Pitch 5.00 / 5.08 BLIDC 5.08 E * 0.32 - 0.75 mm2 (IEC) / 22 - 20 AWG (UL) * 250 V (IEC) / 300 V (UL) * 9 A (IEC) / 5 A (UL) 16.65 0.656" P L1 Technical data Ordering data Rated data acc. to IEC 664-1 / VDE 0110 (4.97) Clamping range, max. mm2 0.32...0.75 Solid H05(07) V-U mm2 0.50...0.75 Stranded H07 V-R mm2 Flexible H05(07) V-K mm2 0.50...0.75 Flexible with ferrule mm2 2 Ferrule with plastic collar mm Stripping length mm Rated current at ambient temperature A Overvoltage category Pollution severity Rated voltage Rated impulse voltage V kV 20C 9.0 Solder pin length Colour orange black Order no. 1724940000 1724950000 1724960000 1724970000 1724980000 1724990000 1725000000 1725010000 1725020000 1725030000 1725040000 Order no. 1759390000 1759400000 1759410000 1759420000 1759430000 1759440000 1759450000 1759460000 1759470000 1759480000 1759490000 40C 7.5 III 3 III 2 II 2 250 4.0 320 4.0 400 4.0 a UL 1059 rated data - E60693 B C D Rated voltage V 300 300 Rated current A 5.0 5.0 AWG conductor 22-20 r CSA C22.2 rated data - LR12400 B B C D Rated voltage V 300 300 Rated current A 8.0 8.0 AWG conductor 22-20 Material data Type of insulating material PBT Flammability class acc. UL94 V-0 Contact base material CuSn Contact plating tin plated Information * Additional colours on request * Rated current refers to rated cross-section and min. number of poles * for IDC contact 0.5: Conductor acc. to DIN EN 60352-4 * AWG conductor: solid or flexible, 7 or 19 strands * Max. outside diameter of the conductor: 2.4 mm E.58 25 0.984" L1+P 14 0.551" IDC (Insulation Displacement Connection) is the fastest manual cable connection method available. It is 60% faster than screw clamping. and 40% faster than spring clamp connections. IDC completely removes the need to strip the insulation from the cable. The unprepared flexible cable is simply inserted into the cable-entry point. The cable slide is then pushed into place using thumb or screwdriver. and the connection is then complete. The main body of the connector houses a V-shaped IDC blade which cuts through the cable insulation and bites into the bare copper. This produces a gas-tight and vibration-resistant connection. The Weidmueller IDC connections are designed to and conform with DIN EN 60 352-4. Pitch 5.08 mm Poles 2 3 4 5 6 7 8 9 10 11 12 L1 mm (inch) Qty. 5.08 (0.200) 100 10.16 (0.400) 100 15.24 (0.600) 100 20.32 (0.800) 50 25.40 (1.000) 50 30.48 (1.200) 50 35.56 (1.400) 50 40.64 (1.600) 50 45.72 (1.800) 50 50.80 (2.000) 50 55.88 (2.200) 50 Articles with coloured order number are kept permanently in stock at the central warehouse in Germany. Delivery times see page X.2 PCB_E002-E064_GB 04.11.2003 15:01 Uhr Seite E.59 IDC connection socket connectors Accessories Omnimate Range Pitch 5.00 / 5.08 BLIDC 5.08B Coding element See page L.10 25 0.984" 14 0.551" L1+P+1.95 P 16.65 0.656" L1 Fixing block See page L.7 E Ordering data Solder pin length Colour orange black Marking strips See page L.24 Mounting block See page L.23 Pitch 5.08 mm Poles 2 3 4 5 6 7 8 9 10 11 12 L1 mm (inch) Qty. 5.08 (0.200) 100 10.16 (0.400) 100 15.24 (0.600) 100 20.32 (0.800) 50 25.40 (1.000) 50 30.48 (1.200) 50 35.56 (1.400) 50 40.64 (1.600) 50 45.72 (1.800) 50 50.80 (2.000) 50 55.88 (2.200) 50 Order no. 1759500000 1759510000 1759520000 1759530000 1759540000 1759550000 1759560000 1759570000 1759580000 1759590000 1759600000 Order no. 1759610000 1759620000 1759630000 1759640000 1759650000 1759660000 1759670000 1759680000 1759690000 1759700000 1759710000 Articles with coloured order number are kept permanently in stock at the central warehouse in Germany. Delivery times see page X.2 Screwdriver See page L 22 Part no. 9008330000 E.59