E
E.58 Articles with coloured order number are kept permanently in stock at the central warehouse in Germany.
Delivery times see page X.2
Omnimate Range
Pitch 5.00 / 5.08
IDC connection socket connectors
IDC (Insulation Displacement Connection) is the fa-
stest manual cable connection method available.
It is 60% faster than screw clamping. and 40% fa-
ster than spring clamp connections.
IDC completely removes the need to strip the insu-
lation from the cable.
The unprepared flexible cable is simply inserted in-
to the cable-entry point. The cable slide is then
pushed into place using thumb or screwdriver. and
the connection is then complete.
The main body of the connector houses a V-sha-
ped IDC blade which cuts through the cable insu-
lation and bites into the bare copper. This produ-
ces a gas-tight and vibration-resistant connection.
The Weidmueller IDC connections are designed to
and conform with DIN EN 60 352-4.
BLIDC 5.08
•0.32 – 0.75 mm2(IEC) / 22 – 20 AWG (UL)
• 250 V (IEC) / 300 V (UL)
• 9 A (IEC) / 5 A (UL)
Technical data
Rated data acc. to IEC 664-1 / VDE 0110 (4.97)
Clamping range, max. mm20.32…0.75
Solid H05(07) V-U mm20.50…0.75
Stranded H07 V-R mm2
Flexible H05(07) V-K mm20.50…0.75
Flexible with ferrule mm2
Ferrule with plastic collar mm2
Stripping length mm
Rated current
at ambient temperature 20°C 40°C
A9.0 7.5
Overvoltage category III III II
Pollution severity 3 2 2
Rated voltage V 250 320 400
Rated impulse voltage kV 4.0 4.0 4.0
aUL 1059 rated data - E60693 B C D
Rated voltage V 300 300
Rated current A 5.0 5.0
AWG conductor 22-20
rCSA C22.2 rated data - LR12400 B B C D
Rated voltage V 300 300
Rated current A 8.0 8.0
AWG conductor 22-20
Material data
Type of insulating material PBT
Flammability class acc. UL94 V-0
Contact base material CuSn
Contact plating tin plated
Information
•Additional colours on request
•Rated current refers to rated cross-section and min. number
of poles
•for IDC contact 0.5: Conductor acc. to DIN EN 60352-4
•AWG conductor: solid or flexible, 7 or 19 strands
•Max. outside diameter of the conductor: 2.4 mm
BLIDC 5.08
P
L1
L1+P
14
0.551"
16.65
0.656"
25
0.984"
Ordering data
Solder pin length
Colour orange black
Pitch 5.08 mm
Poles L1 mm (inch) Qty. Order no. Order no.
25.08 (0.200) 100 1724940000 1759390000
310.16 (0.400) 100 1724950000 1759400000
415.24 (0.600) 100 1724960000 1759410000
520.32 (0.800) 50 1724970000 1759420000
625.40 (1.000) 50 1724980000 1759430000
730.48 (1.200) 50 1724990000 1759440000
835.56 (1.400) 50 1725000000 1759450000
940.64 (1.600) 50 1725010000 1759460000
10 45.72 (1.800) 50 1725020000 1759470000
11 50.80 (2.000) 50 1725030000 1759480000
12 55.88 (2.200) 50 1725040000 1759490000
PCB_E002-E064_GB 04.11.2003 15:01 Uhr Seite E.58
E
Articles with coloured order number are kept permanently in stock at the central warehouse in Germany.
Delivery times see page X.2 E.59
Omnimate Range
Pitch 5.00 / 5.08
IDC connection socket connectors
BLIDC 5.08B Accessories
L1+P+1.95
P
L1
14
0.551"
25
0.984"
16.65
0.656"
Ordering data
Solder pin length
Colour orange black
Pitch 5.08 mm
Poles L1 mm (inch) Qty. Order no. Order no.
25.08 (0.200) 100 1759500000 1759610000
310.16 (0.400) 100 1759510000 1759620000
415.24 (0.600) 100 1759520000 1759630000
520.32 (0.800) 50 1759530000 1759640000
625.40 (1.000) 50 1759540000 1759650000
730.48 (1.200) 50 1759550000 1759660000
835.56 (1.400) 50 1759560000 1759670000
940.64 (1.600) 50 1759570000 1759680000
10 45.72 (1.800) 50 1759580000 1759690000
11 50.80 (2.000) 50 1759590000 1759700000
12 55.88 (2.200) 50 1759600000 1759710000
Coding element
See page L.10
Fixing block
See page L.7
Marking strips
See page L.24
Mounting block
See page L.23
Screwdriver
See page L 22
Part no. 9008330000
PCB_E002-E064_GB 04.11.2003 15:01 Uhr Seite E.59
